“This site contains affiliate links for which OEMDTC may be compensated” |
August 21, 2019 NHTSA CAMPAIGN NUMBER: 19V612000
Brake Lights may be Dim/FMVSS 108
Without a sufficient level of brightness from the brake lights, the vehicle may have reduced visibility to other drivers when braking, increasing the risk of a crash.
NHTSA Campaign Number: 19V612
Manufacturer BMW of North America, LLC
Components EXTERIOR LIGHTING
Potential Number of Units Affected 403
Summary
BMW of North America, LLC (BMW) is recalling certain 2019 Rolls-Royce Cullinan vehicles. The brake lights may not be bright enough. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Rolls-Royce Motor Cars will notify owners, and Rolls-Royce Motor Car dealers will update the brake light software, free of charge. The recall began October 22, 2019. Owners may contact Rolls-Royce Motor Cars Customer Relations and Services at 1-866-230-4956 or at customer.relations@rolls-roycemotorcarsna.com.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Rolls-Royce has a Recall
Date: September 27, 2019
Bulletin #: A 09 2019 07
Aftersales Bulletin
Cullinan (RR31) Rear Brake Light Reprograming – Safety Recall 19V-612
TECHNICAL CAMPAIGN (RECALL) – Complete as soon as possible, using all available means to recall the vehicle for correction
Please be reminded that it is a violation of Federal law (The Safety Act) for you to sell, lease or deliver any new motor vehicle covered by this notification until the delivery stop / safety recall repair has been performed. This means that dealers may not legally deliver a new motor vehicle to a consumer until it is fixed or use/sell replacement equipment/parts subject to a delivery stop / safety recall. Note also that substantial civil penalties apply to violations of this law (The Safety Act).
Also, you should not sell, lease or deliver any Provenance (CPO) or used vehicles subject to a delivery stop / safety recall until the repair is completed.
− 1. Situation
− A number of Rolls-Royce Cullinan (RR31) vehicles have been identified as having a potential issue concerning the LH & RH Rear Brake Lights. Due to a supplier manufacturing issue within the light assembly unit there may be reduction of light being emitted from one or both the rear brake lights when the brake pedal is activated. Although the reduction is low, there is a risk that the brake light brightness of the illumination does not meet specification requirements and therefore needs to be corrected.
− The problem has been rectified with vehicle software version S15A-19-07-555, which is included in ISTA 4.19.3x.
− Dealers should check for vehicles which are subject to this Technical Campaign using ISPA (Integrated Service Processes Application) or S-Gate/AIR.
− 2. Procedure
Check the current vehicle integration level using AIR:-
Vehicle I-stage at or greater than S15A-19-07-555: No further action is required.
Vehicle I-stage at version below S15A-19-07-555: Update vehicle using the latest version of ISTA programming data (4.19.3x or higher):-
- Check that ISTA is at the correct version BEFORE programming the vehicle, the ISTA application should be 4.19.3x or higher. This information can been seen on the information tab of ISTA launcher.
- Connect the battery charger to the vehicle.
- Connect ICOM and carry out an ISTA/D session and make sure the vehicle is fault free and ready for programming.
- Select vehicle management -> software update.
- Determine measures plan.
- Check the measures plan to be sure that the vehicle will be updated to I-Level S15A-19-07-555 or later.
- Accept and fully work through the measures plan for the vehicle control units to be processed.
- Check the final report to make sure the vehicle I-Level has been updated to S15A-19-07-555 or later.
- Check all fault memories and perform all necessary initialisations and calibrations after programming and clear down any remaining fault entries.
3. Parts Information
No parts required
4. Warranty Information Claims are subject to current warranty terms.
Defect Code | 00 63 62 01 00 |
Labour Code | Description | Labour | Notes |
00 62 784* | Programme/code the control units | 8 FRU | Use as programme flat rate |
00 62 782* | Programming and encoding charged through a different campaign or repair | 1 FRU | Use as associated repair time only to close off the Campaign |
00 99 000* | Job time without allowance for /maintenance | 1 FRU | Use to close off Campaign (for vehicles that already have the correct I-Step) |
−
− *Only use one of the above codes.
Contact Information:
If you have further questions please contact your Regional Aftersales Manager (RAM).
Date: August 19, 2019
Bulletin #: A 08 2019 07 C
Aftersales Bulletin
Cullinan RR31 Rear Brake Lights
DELIVERY STOP – Do not allow vehicles to leave VDC, be retailed or delivered to a customer
1. Affected Vehicles
2. Situation
A Delivery Stop has been issued due to potential issue that has been identified with a limited number of vehicles due to an issue concerning the LH and RH Rear Brake Lights. Please do not retail any of these vehicles or hand over to a customer.
3. Procedure
A Service Information bulletin will be published as soon as further details are available. Please do not order any parts at this time, as the campaign procedure is still being finalized. Vehicles affected by this delivery stoppage must not be delivered to a customer until repairs are completed.
4. Contact Information:
If you have further questions please contact your Regional Aftersales Manager (RAM) or your Regional General Manager (RGM).
IMPORTANT NON-COMPLIANCE RECALL – Remedy Available
This notice applies to your motor car,
Recall Campaign No. 19V-612: Stop Lamps
October 2019
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Rolls-Royce Motor Cars Ltd. has decided that certain Model Year 2019 Rolls-Royce Cullinan motor cars fail to conform to Federal Motor Vehicle Safety Standard No. 108 (Lamps, reflective devices, and associated equipment). Our records indicate that you are the owner of a potentially affected motor car.
Why are we contacting you?
We are pleased to inform you that we are ready to perform this recall. If you have not had this recall performed, please contact your authorized Rolls-Royce Motor Cars dealer immediately to schedule an appointment. You may request alternate transportation from your Rolls-Royce Motor Cars dealer.
What could happen?
The illumination of the brake light(s) may be less than required. Therefore, the visibility of the brake light(s) could be reduced for a driver behind an affected motor car, which may increase the risk of a crash.
If you are not the only driver of this motor car, please advise all other drivers and passengers of this important information.
What will Rolls-Royce do?
The stop lamp software will be updated for free and take approximately two hours.
What if I am not the current owner of this motor car?
You can update the motor car ownership or your contact information by completing the enclosed postage-paid card. If you are a vehicle lessor, Federal Regulations require you to forward this notice to your lessee within ten days.
What if I have questions or experience problems?
Should you have any questions about this recall, please contact your authorized Rolls-Royce Motor Cars dealer. If you need additional assistance, contact Rolls-Royce Motor Cars Customer Relations and Services at 1-866-230-4956 or at customer.relations@rolls-roycemotorcarsna.com.
If your Rolls-Royce Motor Cars dealer is unable to remedy the defect without charge or within a reasonable period of time, you may notify the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590, call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153), or go to https://www.safercar.gov.
Please be assured that your safety is important to us, and we sincerely apologize if this recall causes any inconvenience. We recommend that you and your passengers wear your safety belt at all times.
Sincerely,
Rolls-Royce Motor Cars NA, LLC
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
ROLLS-ROYCE | CULLINAN | 2019 |
9 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-19V612-2806.pdf 72.604KB
Remedy Instructions and TSB
RCRIT-19V612-6474.pdf 142.839KB
Recall Quarterly Report #1, 2019-4
RCLQRT-19V612-8308.PDF 211.131KB
Manufacturer Notices(to Dealers,etc) – Aftersales Bulletin Cullinan RR31 Rear Brake Lights
Non-Compliance Notice 573 Report
RCLRPT-19V612-1515.PDF 214.107KB
Recall Acknowledgement
RCAK-19V612-7061.pdf 289.638KB
Recall 573 Report – AMENDMENT 1
RCLRPT-19V612-5526.PDF 214.109KB
Recall Quarterly Report #2, 2020-1
RCLQRT-19V612-4008.PDF 211.226KB
Recall Quarterly Report #3, 2020-2
RCLQRT-19V612-5669.PDF 211.313KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V612&docType=RCL
- Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
- Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
- Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
- Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high brightness chips per bulb, Working Voltage: 9v-30v.
- Fits: 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc. Easy installation, plug and play.
- Application: Brake Lights, Tail Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Compatible for both CK/SRCK and Standard socket, non-polarity design. 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- Twice The Life Of Standard Incandescent Bulbs
- Philips Offers A Wide Range Of Smart Light Bulbs, Lamps, Fixtures And Accessories
- Original Equipment Quality Seal For The Most Reliable Performance
- Always Replace In Pairs To Ensure A Symmetric Light Beam From Both Bulbs On The Road. Bulbs Dim Over Time
- LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage: 9v-30v
- Fits: 7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 992 WY21W W21/5W W21W etc. Easy installation, plug and play.
- Application: Brake Lights, Tail Lights, Stop Lights, Daytime Running Lights, Fog Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Compatible for both CK/SRCK and Standard socket, non-polarity design. 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
- HELLA miniature bulbs are manufactured with precise lighting requirements to fit a wide variety of brake lamp, stop lamp, turn signal, and reverse lamp applications
- All bulbs are produced under HELLA's stringent testing requirements, you know this is a brand that can be trusted
- DOT, ECE, and INMETRO certified - Please check your local regulations
- (Set of 2 W2.5x16q D.F. wedge base 3156/3157 red LED bulbs) LED Chips: Each 3156/3157 LED red bulb is equipped with 39 pieces high quality, high power with high performance led chips per 3156 3157 LED bulb, 360° full angle illumination with projector lens design
- Important: Extra LED resistors maybe required to avoid the signal hyper flash or error code for LED bulbs draw less current than stock lamps. Compatible with both standard and CK / SRCK type. Voltage: 12V~14.8V, Built in stable current IC driver for longer lifespan. Color: Pure red.
- Dual filament LEDs are universal fit for single filament and dual filaments T25 wedge base bulbs. Non-polarity. Cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, p27/7w, 3157/40610, 3157/17172, 12450004, 78633, 17945, 3156/21863, 9442003, 78625, 17941, etc.
- Application: Used for upgrading OEM dim incandescent or damaged rear turn signals, directional blinker lamps, brake stop tail lights, taillights, rear side marker light amp for much safer driving and luxury looking for automotive cars, trucks, motorcycles, SUVs, vans.
- Newly upgraded smart IC driver for better performance and longer lifespan. USA located.
- Twice the life of standard incandescent bulbs
- Best value
- Original equipment quality seal for the most reliable performance
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time.
- Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- Twice the life of standard incandescent bulbs
- Best value
- Original equipment quality seal for the most reliable performance
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time.
- Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- twice the life of standard incandescent bulbs
- best value
- original equipment quality seal for the most reliable performance
- always replace in pairs to ensure a symmetric light beam from both bulbs on the road. bulbs dim over time.
- miniature bulbs by philips, for over 100 years we have been continuously innovating automotive lighting
Last update on 2024-04-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.