A loss of electrical power to the vehicle can cause the vehicle to unexpectedly stall, increasing the risk of a crash.
BMW of North America, LLC (BMW) is recalling certain 2010-2011 BMW 335d vehicles with diesel engines. The connection of the positive battery cable at the fuse box terminal may degrade over time, possibly resulting in an intermittent loss of electrical power.
BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall is expected to begin July 6, 2018. Owners may contact BMW customer service at 1-800-525-7417.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SI B61 09 18
June 4, 2018
- 【Automotive Car Battery Tester】 As one of the most cost-effective product of KONNWEI, KW208 can test all 12V 100-2000CCA batteries including regular flooded, AGM flat plate, AGM spiral, or gel batteries. Provide overall analysis of batteries’ health and help you know its status in advance before it dies. KW208 battery tester support cranking and charging system test also alternator and starter test.
- 【Display Overall Batteries Data】KW208 12V Battery Load Tester gives you the basic battery parameters such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. Additionally, battery cca tester will also show you professional advice whether to replace or charge the battery.
- 【 >99.5% Accuracy】Thanks to KW208’s powerful and smart chip, it provides more than 99.5% precise testing reports within milliseconds(testing results refer to US Midtronics), greatly improved the testing speed compared to other battery testers.
- 【Plug and Play】 KW208 Battery load analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and ready to test and analyze battery. It’s that easy!
- 【Starter& Alternator Tester】KW208 not only a great battery load tester that tests batteries cranking & charging system but also can test alternator's charging and starter's cranking conditions. And it can switch up to 8 languages for different needs.
- 【BATTERY CHECKER ANALYZER】 FOXWELL BT705 auto battery life tester designed for 12 V or 24 V battery with a capacity of 100 to 2000 CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL and deep cycle batteries, 12V & 24V starting and charging system. The test results based on JIS, EN, DIN, SAE, CCA, BCI, GB, CA, MCA and IEC Standards.
- 【CAR BATTERIES DOCTOR】 Adopt the advanced conductance testing technology, the premium quality copper clip and wire maintain a stable communication all throughout the testing process to provide you with reliable results! Accurately and quickly measure the actual cold cranking amps, capability of the vehicle starting battery and healthy state of the itself. Test results are not limted to SOH, SOC, CCA , current, rating, resistance, no-load & loaded voltage, charging ripple value, etc.
- 【CRANKING & CHARGING SYSTEM TEST】 BT705 auto battery alternator tester displays the decision on the starter system, cranking voltage and cranking time in milliseconds. Also, the battery diagnostic scan tool can check 12 volt or 24 volt vehicle electronic system’s charging condition to make sure the output voltage of the generator is in a regular condition, the rectifier diode works fine and the charging current is a normal status.
- 【WORTH TO OWN】 You need to know how much life your batteries have left. BT705 hybrid battery cca tester can accurate reading of battery health status in just 3 seconds in its large and easy to use backlit LCD display, help you diagnose and resolve battery health problems timely without disconnecting the battery or using a separate battery. It is widely for cars, suvs,mini-vans, trucks, marine boats, motocycle, trackors or other devices which equiped in 12v or 24v batteries.
- 【EXTRA-SAFE OPERATION】Different from other vehicle battery alternator analyzers, our FOXWELL BT705 digital car battery load tester for all batteries was equipped with 100% high-quality safety copper clip, which has reverse polarity protection and spark-proof function, which can achieve stable and safe connection during the test. Plus, the small and compact FOXWELL battery load analyzer can be easily stored in our additional carrying case.
- 【Entry-Level Battery Tester】 Test and analyze your 12V lead-acid battery with ease. This TOPDON car battery tester tells SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and many other readable analysis results. Compatible with 100~2000CCA regular flooded, AGM flat plate/spiral, EFB, and GEL for their optimum performance.
- 【Wide Application】Safe-to-use passive testing method allows this 12V battery load tester only to be powered up once it’s correctly connected. You don’t need to charge it before having accurate battery test results for a variety of vehicles: cars, motorcycles, trucks, RV, ATV, SUV, boats, yachts, lawnmowers, and even golf carts.
- 【3 Testing Functions】①Battery health test - tell if the battery is in good working condition; ②Cranking test - see if the electrical system has enough power to start the engine; ③Charging systems test - check if the generator/rectifier diode/charging current is normal. This handy auto battery analyzer makes sure your summer road trips won’t end on a flat.
- 【Test with Little Fuss】This load battery tester is designed with 3-color LEDs on the unit so you can quickly identify battery health status. Thanks to its menu-driven operation it’s fairly straightforward to use. And the premium-quality copper clamps feature polarity reverse protection and spark proof, for a stable and safe connection in testing process.
- 【Solid Choice】Small and compact, TOPDON BT100 can easily be stored in a glove box or center console. Fast and accurate, this battery load tester will quickly help you determine if your car battery needs a jump start, or to be changed. A great option for automobile workshops, garages, and DIY users who need to check batteries on the regular.
- 👍【ACCURATE BATTERY DIAGNOSIS】Autel advanced battery tester BT608E is a professional analysis tool for testing 6- and 12-volt batteries from 100-3000 CCA, it covers Flooded, AGM, AGM Spiral, EFB and GEL Cell batteries, and is highly compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA battery standards. With the Adaptive Conductance technology, you can get the most accurate test results and deduce the mis-diagnosis to lowest, 95% battery accuracy and 100% detection rate of bad battery.
- 👍【ALL SYSTEM DIGANOSTICS SAME AS AUTEL MAXICOM MK808/ MK808BT】Autel battery load tester BT608 (E) not only works on car battery, but also works on all systems diagnostics, its diagnostic software is same as Autel MX808/ MK808/ MK808BT. It can scan all the vehicle systems to read and clear fault codes/ view DTC descriptions, live data and freeze frame for 80+ US, EU and Asian cars up to 2020/2021. One time purchase, you will get a 2-in-1 battery test and all system diagnosis tool.
- 👍【INTUITIVE ADAPTIVE CONDUCTANCE】Car battery tester Autel BT608 (E) utilizes Adaptive Conductance, an advanced battery analysis technology for more accurate examination of the battery's cold cranking ability and reserve capacity. Autel MaxiBAS BT608 (E) enables test on low or almost completely discharged batteries, and it can be done in the vehicle without disconnecting the terminals, no more mis- and repeat diagnosis, accurate test results for one try.
- 👍【CRANKING & CHARGING TEST, ELECTRIC RESET】This vehicle battery load tester Autel BT608 (E) can run a complete test on automobile cranking and charging system. Adaptive Conductance algorithm to fast test the starter/generator and complete diagnostics for all electrical systems. It can test 12- and 24-volt cranking & charging systems, check for cranking Amps, engine cranking speed etc.Electric Reset is applicable to 53+ vehicle makes, much wider coverage than other battery testers on the market.
- 👍【EASY DATA VIEWING, SHARING, PRINTING 】Digital Auto Battery Analyzer Autel BT608 (E) has data review function that enables technician to review the data record, and print out the diagnostic report instantly with the built-in thermal printer, easy to sharing PDF test report and print.
- 👍【2022 NEWEST, UPGRADED OF BT508/BT506】Autel MaxiBAS BT608E car battery tester is designed to test 6V/12V Flooded, AGM, AGM Spiral, EFB and GEL batteries with capacity 100 to 3000 CCA. It’s a complete standalone touchscreen battery tester and cranking & charging system analyzer, compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA protocols, supporting 12V/24V cranking & charging systems test. Any questions or issues, please contact 💌 immoautel @ outlook . com💌 any time.
- 👍【SMART ADAPTIVE CONDUCTANCE】Autel maxibas bt608 car capacity tester applies innovative Adaptive Conductance technology(worth $1000+) for more accurate examinations. It can diagnose battery with low capacity with ease(unlike traditional battery tester, no need for charge and retest). Test accuracy rate by 94.11%, bad battery detection rate by 63.55%, reduce charge and retest by 30.03%, detect the battery SOH, provides reliable results of the battery’s cold cranking ability and reserve capacity.
- 👍【CRANKING AND CHARGING SYSTEM TEST】Autel BT608E car cranking and charging system analyzer supports in-vehicle and out-of-vehicle testing of passenger vehicle batteries and testing 12- and 24-volt cranking/charging systems. Cranking and charging diagnostics can check starter system, cranking voltage, engine cranking speed and generator status. These tests results will display on the screen and quickly determine the operating status of the cranking and charging system.
- 👍【ALL SYSTEM DIAGNOSIS & AUTO VIN】𝘼𝙪𝙩𝙚𝙡 𝙗𝙩𝟱𝟬𝟴/𝙗𝙩𝟱𝟬𝟲 𝙘𝙖𝙣 𝙣𝙤𝙩 𝙨𝙪𝙥𝙥𝙤𝙧𝙩 𝙖𝙡𝙡 𝙨𝙮𝙨𝙩𝙚𝙢 𝙙𝙞𝙖𝙜𝙣𝙤𝙨𝙞𝙨. Autel MaxiBAS BT608E automotive battery load tester has the same diagnostic functions as Autel MX808/MK808/MK808BT/MK808TS/MP808/MP808K/MP808BT Pro/MP808BT/MP808TS. It can read and clear codes all available vehicle systems, view live data, freeze-frame data, ECU information for 80+ US, EU, and Asian makes, up to 2019/2020, and even 2022 newest models.
- 👍【REGISTER BATTERIES FOR 53 VEHICLE MAKES】The Battery registration function of Autel battery tester bt608 is a necessary step to let your engine control module (DME) know the newly installed battery, and the vehicle will reset the old battery statistics, which help you avoid issues: Overcharge to shorten battery life; Energy management system malfunction; Start-stop function malfunction; Vehicle fails to start;The IGR malfunction and the energy recovery is invalid etc.
- TRUSTED TESTING: Test load, battery condition, and starter motor draw; 50 Amp load test for 6V batteries and 100 Amp for 12V batteries; tests up to 1000 CCA
- COMPLETE DIAGNOSIS: Delivers a complete charging system diagnosis for batteries in cars, small trucks, RVs, motorcycles, ATVs, boats, and lawn tractors
- SIMPLE OPERATION: Top-mounted rocker switch for ease of use and highly visible meter readings
- HEAVY-DUTY CLAMPS: Super-grip, heavy-duty, color-coded battery clamps
- STEEL CASE: Durable steel case with baked enamel shell and rubber-insulated carrying handle; ventilated to stay cool
- 🚗【Auto Car Battery Tester】KINGBOLEN BM550 battery tester can test all 6v 12v 24v 100-2000 CCA car batteries, support 2Ah-220Ah(need to enter the corresponding CCA value on the battery), including regular flooded(Regular battery), AGM flat plate(AGM tablet battery), AGM spiral(AGM winding battery), GEL and EFB batteries, battery analyzer for cars trucks SUV ATV boats motorcycles vehicle etc.
- 🚗【Quick Tests & Accurate Data】The results of the battery test are based on the CCA standard, which can be quickly and accurately displayed on the 1.8-inch HD screen, allowing you to quickly know the status of the battery. The clip is made of pure copper, with a strong bite force. The red wire is connected to the positive "+", and the black wire is connected to the negative "-".
- 🚗【Multifunctional Battery Analyzer】KINGBOLEN BM550 car battery analyzer can quickly and accurately display multiple data of the car battery. It can test the SOH (state of health) and SOC (state of charge) of the battery, easily test 100-2000 CCA, internal resistance test and voltage test. With our battery tester, you can easily grasp the current state of your car battery and avoid accidents.
- 🚗【Plug and Play】It is simple to use, just connect the clip of the battery tester to the car battery correctly and it can start working, whether the battery is in vehicle or out of vehicle, or a dead battery can be tested.Start your test now!
- 🚗【Reverse Connection Protection】The battery tester adopts a safe design, the red wire of this battery tester is connected to the positive "+" of the car battery, and the black wire is connected to the negative "-", and it can start to work normally. If you accidentally reverse the two wires, don't worry, the battery tester will not work at this time to prevent the internal circuit from burning, which can well protect the equipment and the long-term use of the car battery.
- 🚘Car Battery Tester with Built-in Printer➤This automotive battery tester can check the overall health of all 12 Volt and 24 Volt batteries with 100 to 2000 CCA, gage the cranking capability, check its aging status, and run a complete system charging test. With built-in thermal printer, you can get a diagnostic receipt in seconds and share it with your customers
- 🚘Automotive Battery and Alternator Tester➤BST300P auto battery load tester can test both the alternator's starting voltage when cranking the engine and the alternator's continuous output when the engine is running. Works on all battery rating Standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB standards. Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers and even golf carts
- 🚘Quick and Accurate Battery Analyzer➤This battery analyzer can test 12V lead-acid batteries, including regular flooded, AGM flat plate, AGM spiral, gel, and deep-cycle batteries. Displaying battery parameters in about 2 seconds to advise you of a battery’s full/low or charge/replace status. Accuracy more than 99.5% precise testing reports within milliseconds(testing results refer to US Midtronics)
- 🚘User Friendly for New Beginners➤Comes with a portable and lightweight bag, suitable for your glove box. With 2.5in LCD display screen, eye-friendly and easy to read even in direct sunlight. Support multiple languages, English, German, French, Italian, Spanish, Portuguese and Russian. “Out of Vehicle”and “In Vehicle”test allow to test the battery whether it’s inside or separate from the vehicle
- 🚘A Must Tool for Every Driver➤Easy to operate with one-key analysis, perfect for PROs, automobile factory, garage, auto battery manufacturer, and DIYers. Get it now and test your battery before it dies, save money and time for routine check-ups, avoid a lemon in second hand car trading. We offer 30 days return, 12-month warranty and 24-hours online customer service to meet your 100% satisfaction
- 🍏 WHAT IT CAN DO - This FOXWELL car battery load tester is developed to test 12V regular flooded, AGM flat plate, AGM sprial and GEL batteries, start-stop AGM and EFB batteries, as well as 6V&12V&24V starting and charging system. Advanced conductance and ripple voltage test provide an easy and affordable solution for you to check battery health and detect faults, and give you accurate test result just in seconds.
- 🍊 WHAT DATA YOU CAN GET - With the car battery analyzer, you’ll get measured voltage, measured CCA (Cold Cranking Amps), rated CCA, cranking voltage (voltage when starting engine), cranking time, charging voltage (no load), charging voltage (loaded), charging ripple and so on. Charging system test, cranking test and start-stop system test are all available on the 12v battery tester.
- 🍋 COMPARED WITH OTHER BATTERIES TESTERS - Tests start-stop AGM and EFB batteries; Ripple voltage test allows the technicians to check the output voltage of alternator quickly; Equipped with 0-1000A AC and DC current clamp(optional); More convenient, stable and accurate with advanced conductance test technology; Built-in thermal printer; Replaceable test cable.
- 🍌 SAFE OPERATION&USER-FRIENDLY DESIGN - FOXWELL 6V/12V/24V battery analyzers don't emit light, heat or spark, or discharge battery. Besides, test result can be printed via built-in thermal printer at anytime and anywhere. The name of the person and battery information can be customized before printing. 8.5ft replaceable test cable allows you to test inside/outside of cars.
- 💌 7-24 AFTERSALES SERVICE - We offer our customers one-year free warranty, refund allowed if not satisfied, lifetime free online update and multiple languages are also available. Any questions or something we can help, just write to us via Amazon messages, we’ll reply to you within 5 hours on average to offer the best service. Please DO choose Foxassist from foxwelltech.us to do registration and update.
Last update on 2022-07-06 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.