NHTSA ID Number: 10161589
Manufacturer Communication Number: MC5200119
Summary
As a part of the ongoing quality analysis, BMW Motorrad has found that the seat does not fulfill the requirements with respect to waterproofness, whereby water can penetrate into the helmet holder.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| BMW | C 400 X | 2019 |
Details
As a part of the ongoing quality analysis, BMW Motorrad has found that the seat does not fulfill the requirements with respect to waterproofness, whereby water can penetrate into the helmet holder.
Identification of the components
The seats are indistinguishable externally. Mark the old seat before removal.
Vehicles affected
In order to determine if a specific vehicle is affected by this Technical Campaign, it will be necessary to verify all VIN’s through AIR (Aftersales Information Research). Based on the response of the system, either proceed with the repair or take no further action. Please note, VIN’s in DCS Vehicle History Check may not appear until 24-72 hours after the release of this bulletin, therefore AIR is the recommended method for determining open campaigns.
Production Solution
As of 10/24/2018 vehicles have been fitted with redesigned seats.
Service Solution
For affected vehicles prior to delivery or during the next workshop visit, the seat is to be renewed as per repair instructions 52 53 059 Renewing complete dualseat in AIR (Aftersales Information Research).
Warranty processing
Covered by the normal terms of the BMW New Motorcycle Limited Warranty.
SEOCONTENT-START
© 2019, BMW of North America, LLC.
The contents of this document are confidential and should not be shared with third parties for distribution.
All prices subject to change without notice. 05/2019
Replacing Seat
C 400 X (K09, 0C19)
Service Information No. SI 52 001 19
Service Information No. SI 52 001 19
C 400 X (K09, 0CC19) Replacing Seat
© 2019, BMW of North America, LLC. Page 2
The contents of this document are confidential and should not be shared with third parties for distribution.
All prices subject to change without notice. 05/2019
Details
As a part of the ongoing quality analysis, BMW Motorrad has found that the seat does not fulfill the requirements with respect
to waterproofness, whereby water can penetrate into the helmet holder.
Figure 1: Seat C 400 X
Identification of the components
The seats are indistinguishable externally. Mark the old seat before removal.
Vehicles affected
In order to determine if a specific vehicle is affected by this Technical Campaign, it will be necessary to verify all VIN’s
through AIR (Aftersales Information Research). Based on the response of the system, either proceed with the repair or take
no further action. Please note, VIN’s in DCS Vehicle History Check may not appear until 24-72 hours after the release of this
bulletin, therefore AIR is the recommended method for determining open campaigns.
Production Solution
As of 10/24/2018 vehicles have been fitted with redesigned seats.
Service Solution
For affected vehicles prior to delivery or during the next workshop visit, the seat is to be renewed as per repair instructions
52 53 059 Renewing complete dualseat in AIR (Aftersales Information Research).
Warranty processing
Covered by the normal terms of the BMW New Motorcycle Limited Warranty.
Defect code
00 52 01 00 00 Replacing seat
FRU number
*52 53 059 Renewing complete dualseat, 5 FRU’s
+52 53 574 Renewing complete dualseat, 4 FRU’s
*Main Work: These main labor operations include all repair procedures to complete the task with allowance for necessary
ancillary tasks (e.g. visual inspection, lubrication, cleaning parts, use of thread-locking compound etc.) and administrative
tasks. Only one main labor operation can be claimed per repair visit. All other labor operations for any other line(s) must be
claimed using plus code labor operations. Please refer to the Warranty Policy and Procedures Manual regarding add-ons,
proper support, documentation, claims submission and archiving requirements as applicable.
Part number
07 12 9 908 076 2x Socket-head screw, M6x20
— — – — — Seat (see Electronic Parts Catalogue)
Questions regarding this bulletin?
For technical inquires in relation to this bulletin Please contact the Motorrad Technical Support Group
For warranty inquires in relation to this bulletin. Submit an IDS ticket to the Warranty Department
For parts inquires in relation to this bulletin Submit an IDS ticket to the Motorrad Parts Department
SEOCONTENT-END
Service Information No. SI 52 001 19
05/2019
- Leather and Vinyl Preservation: Keeps Leather and Vinyl Looking and Feeling Like New
- Versatile Application: Can be used on all Vinyl and Leather Items
- Motorcycle Riding Gear: Suitable for Leather Gloves, Riding Gear and Boots
- Automotive Applications: Additional uses for Leather Car Seats and Dashes
- Complete Care Formula: Cleans and Restores while it Nourishes and Protects
- Mothers VLR quickly and easily cleans, conditions and protects a wide variety of vinyl, leather and rubber surfaces
- This pro-strength, pH balanced formula safely cleans even the most stubborn ground-in dirt, soil and stains
- Infused with neat's-foot oil and lanolin, this all-in-one blend conditions and protects against drying, fading and cracking, in one simple step
- Protects against drying, fading and cracking
- PROFESSIONAL GRADE BLACK LEATHER CARE IN ONE KIT: The Doc Bailey's Black Leather Detail Kit is your ultimate all-in-one solution to clean, condition, re-dye, and waterproof. Revive dull, faded, or worn black leather in a single, easy step, instantly restoring it to a rich, like-new showroom finish
- ADVANCED WATER & UV PROTECTION: Formulated with natural waxes that create a built-in moisture barrier, this leather restorer shields your expensive gear from rain, road grime, spills, and daily wear. It also offers advanced UV protection to prevent sun damage, cracking, and deterioration over time
- PREMIUM INGREDIENTS WITH NO SILICONE: Our exclusive formula uses gentle natural detergents to lift dirt from the pores, allowing lanolin oil to flow deeply and nourish the leather fibers. It is 100% free of silicone and petroleum, ensuring a natural, matte finish that never feels sticky, greasy, or slippery
- COLOR-FAST DYE WON'T BLEED OR RUB OFF: We use a superior blend of natural waxes that lock the deep black dye pigment right into the material. Once allowed to cure and buffed out, the color is completely locked in-meaning it will not bleed, fade, or rub off onto your clothes, skin, or riding gear
- VERSATILE & SUPER-CONCENTRATED: A little goes a very long way! One 4 fl. oz. bottle can treat dozens of items. Suitable for motorcycle seats, saddlebags, jackets, chaps, work boots, luxury car interiors, furniture, vinyl, and rubber. Note: Do NOT use on buckskin or suede. Kit includes 4 oz. formula, sponge applicator, and buffing cloth
- COLORLESS & ODORLESS LEATHER CLEANER (SPI_208_16) – Chemical Guys leather cleaner gently cleans leather surfaces without dyes or scents, lifting dirt, oils, and embedded dirt while preserving the natural look and feel
- SAFE FOR ALL LEATHER TYPES – A leather cleaner for car interiors, natural, synthetic, faux, and pleather; ideal for furniture, boots, jackets, handbags, and more
- REMOVES DIRT & GRIME – This car leather cleaner breaks down body oils, food spills, dust, and daily buildup without leaving residue, streaks, or causing discoloration
- PREPS FOR CONDITIONING – This Chemical Guys interior cleaner for cars and leather furniture cleaner is the perfect first step before applying a leather conditioner or protectant to maintain durability, suppleness, and appearance
- EASY TO USE – Spray directly on leather, as a leather car seat cleaner, or onto a microfiber applicator, gently scrub with a soft brush, and wipe clean for refreshed, clean leather
- Safe for All Interior Surfaces: Formulated to clean and restore every interior surface, Xpress Interior Cleaner is safe for leather, vinyl, plastic, rubber, wood, and fabric. Unlike harsh cleaners that can dry out or discolor materials, this gentle yet effective formula lifts dirt and grime while preserving the original texture and appearance
- All-in-One Interior Cleaning Power: Ditch the clutter of multiple interior cleaners—Xpress Interior Cleaner does it all! Engineered to tackle dirt, grease, oil, and stubborn traffic marks in a single step, this powerful formula simplifies interior maintenance. It’s perfect for quick touch-ups between deep cleans or as part of a full interior detail, making it an essential tool for maintaining the inside of your car, truck, RV, or boat with ease and efficiency
- No Residue, Just a Fresh Finish: Unlike other cleaners that leave behind a sticky or greasy film, Xpress Interior Cleaner ensures a clean, dry-to-the-touch surface. Its no-residue formula removes contaminants without adding unwanted shine or buildup, maintaining the natural look and feel of your car’s interior
- No Dilution Required, Easy to Use: Designed for convenience, this ready-to-use formula eliminates the hassle of dilution. Simply spray directly onto the surface or a microfiber towel, gently agitate with a detailing brush if needed, and wipe away dirt effortlessly. Whether you’re a professional detailer or a weekend warrior, this quick and efficient cleaner saves time while delivering professional-grade results with minimal effort
- Detailer-Trusted Formula: Part of the renowned Renny Doyle Double Black Collection, Xpress Interior Cleaner is trusted by professional detailers and car enthusiasts alike. Developed for high-performance results, this premium-grade cleaner is used in top-tier detailing shops across the industry
This product presentation was made with AAWP plugin.