NHTSA Campaign Number: 18V830
Manufacturer BMW of North America, LLC
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 1
Engine Connecting Rods may Loosen
Loose engine connecting rods can damage the engine, causing a loss of engine power, increasing the risk of a crash.
Summary
BMW of North America, LLC (BMW) is recalling one 2019 F850GS motorcycle. The engine connecting rods may not have been installed properly, possibly causing them to become loose and disconnect over time.
Remedy
The motorcycle has not yet been sold, and the dealer will replace the engine, free of charge, prior to sale. The recall is expected begin in December 2018. Owners may contact BMW customer service at 1-800-525-7417.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your BMW Motorcycle has a Recall
Service Information No. 0000112500
Recall Acknowledgement
December 3, 2018
Latest Recalls Documents
- Formulated with Trizone technology to protect all 3 critical zones: engine, clutch and gearbox
- Race derived technology for maximum engine acceleration
- Extreme high temperature air-cooled performance and water-cooled engine performance
- Excellent shear stability to prevent viscosity breakdown
- Exceeds API SL and JASO MA-2
- Optimal lubrication in all operating conditions, ensures low oil consumption
- Very high shear and ageing stability, highest levels of wear protection
- Tested and approved for catalytic converters, optimal engine cleanliness
- Up to 10X better friction protection vs. JASO T903:2016 friction std. and up to 5X better wear protection vs. industry standards in IVA engine tests
- Reformulated premium full synthetic with advanced technology and superior additives to maximize horsepower, acceleration, fuel efficiency and oil life
- Exceptional wet clutch protection helps prevent slippage for smooth shifting and maximum performance
- Enhanced protection against deposits and sludge that can reduce oil flow
- Meets or exceeds requirements of API SL and JASO MA-2 for 4-stroke motorcycles including Honda, Yamaha, Kawasaki, and Suzuki
- Optimal lubrication in all operating conditions, ensures low oil consumption
- Very high shear and ageing stability, highest levels of wear protection
- Tested and approved for catalytic converters, optimal engine cleanliness
- Ideally suited for wet clutches
- Specifications and Approvals: API, SM, ACEA A3-04, JASO, MA2
This product presentation was made with AAWP plugin.