February 12, 2024 NHTSA CAMPAIGN NUMBER: 24V104000
Integrated Brake System Malfunction
A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, malfunctioning ABS and/or DSC systems can cause a loss of vehicle control. Either of these scenarios can increase the risk of a crash.
NHTSA Campaign Number: 24V104
Manufacturer BMW
of North America, LLC
Components ELECTRONIC STABILITY CONTROL, SERVICE BRAKES
Potential Number of Units Affected 79,670
Summary
BMW
of North America, LLC. (BMW
) is recalling certain 2023 X1 xDrive28i, 2024 X5 sDrive40i, X5 xDrive40i, X5 M60i, X5M, X5 xDrive50e, X6 xDrive40i, X6M60i, X6M, 2023-2024 X7 xDrive40i, X7 M60i, XB7, XM, 740i, 740i xDrive, 760i xDrive, i7 eDrive50, i7 xDrive60, i7 M70, 2024 530i, 530i xDrive, i5 eDrive40, i5 M60, 750e xDrive, and Rolls Royce Spectre vehicles. The integrated brake (IB) system may malfunction and result in a loss of power brake assist or cause the Antilock Brake (ABS) and Dynamic Stability Control (DSC) systems to not function properly.
Remedy
Dealers will replace the integrated brake system, free of charge. Owner notification letters are expected to be mailed April 5, 2024. Owners may contact BMW
customer service at 1-800-525-7417 or Rolls Royce customer service at 1-877-877-3735.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your BMW has a Recall
SIB 34 04 23
2024-02-22
RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
This Service Information Bulletin (Revision 3) replaces SI B34 04 23 dated February 2024.
Please perform the procedure outlined in this Service Information on all affected vehicles before customer delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure the next time the vehicle is in the shop if the campaigns have a status of remedy available. Otherwise, please release the vehicle.
| ☐ | THIS REPAIR IS MOBILE FRIENDLY |
What’s New:
- Subject
- Model
- Attachments
MODEL
| F95 LCI (X5 M Sports
Activity Vehicle) | F96 LCI (X6 M Sports
Activity Coupe) | G05 LCI (X5 Sports Activity Vehicle) | G06 LCI (X6 Sports Activity Coupe) |
| G07 LCI (X7 Sports Activity Vehicle) | G09 (XM Sports Activity Vehicle) | G60 (5 Series Sedan & i5 Sedan) | G70 (7 Series Sedan & i7 Sedan) |
| U11 (X1 Sports Activity Vehicle) | |||
AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR, AWP, Campaign Summary, or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. As of December 21, 2023, you can see a list of affected vehicles in Inventory Campaign Details (ICD) under ROSS.
SITUATION
In very rare cases, brake assistance and brake assistance systems may fail.
The brake warning lamps light up and the following check control message appears:
“Continuation is possible. Braking system and driving stabilization. Avoid abrupt braking as much as possible. Drive moderately. Higher pedal force may be required for braking. Have it checked by the nearest service partner.”
CAUSE
The Integrated Brake (IB) may not have been produced by the supplier according to specifications, and therefore may not function properly.
CORRECTION
Replace the Integrated Brake, aka brake booster or power brake.
PROCEDURE
Replace the Integrated Brake as per REP34 51 601 “Replacing hydraulic unit”.
PARTS INFORMATION
Use and invoice the applicable part numbers below.
Refer to the weekly Parts Matrix for the most up-to-date ordering information.
| Series | Part Numbers | Description | Quantity |
| U11 | 34 50 5A8D899 | Power brake | 1 |
| 34 50 5A59585 | Brake booster seal | 1 | |
| 07 11 9905374 | Self-locking collar nut | 2 | |
| 07 11 9904670 | Self-locking collar nut | 1[A1] | |
| 07 11 9905147 | hexagonal screw with disc | 1 | |
| F95, F96, G05, G06, G07, G09 | 34 50 5A8D8E0 | Power brake | 1 |
| 34 51 6893390 | Brake booster seal | 1 | |
| 07 14 6890655 | Self-locking collar nut | 2 | |
| G60 | 34 50 5A8D8B9 | Power brake | 1 |
| 34 51 6893390 | Brake booster seal | 1 | |
| 07 14 9904295 | Self-locking collar nut | 2 | |
| 51 71 6966566 | Hexagonal screw with flange | 4 | |
| 51 64 8076922 | Hexagonal screw with disc | 4 | |
| G70 | 34 50 5A8D8A9 | Power brake | 1 |
| 34 51 6893390 | Brake booster seal | 1 | |
| 07 14 9904295 | Self-locking collar nut | 2 | |
| 51 71 6966566 | Hexagonal screw with flange | 2 | |
| 51 64 8076922 | Hexagonal screw with disc | 2 |
Sublet – Bulk Materials
| Part Number | Description | Quantity |
| 81 22 0142156 | BMW | Sublet as needed |
| 83 19 2451316 | BMW | Sublet as needed |
19 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| BMW | 530I | 2024 |
| BMW | 740I | 2023-2024 |
| BMW | 750E | 2024 |
| BMW | 760I | 2023-2024 |
| BMW | I5 | 2024 |
| BMW | I7 | 2023-2024 |
| BMW | I7 M70 | 2023-2024 |
| BMW | X1 | 2023 |
| BMW | X5 | 2024 |
| BMW | X6 | 2024 |
| BMW | X7 | 2023-2024 |
| BMW | XM | 2023-2024 |
| ROLLS-ROYCE | SPECTRE | 2024 |
4 Associated Documents
Recall Acknowledgement
RCAK-24V104-8991.pdf 645.714KB
Defect Notice 573 Report
RCLRPT-24V104-3351.PDF 223.002KB
Remedy Instructions and TSB
RCRIT-24V104-4895.pdf 316.158KB
Manufacturer Notices(to Dealers,etc)
RCMN-24V104-1926.pdf 348.349KB
Latest Recalls Documents
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on. After repairing the vehicle's problems, it can quickly read and clear diagnostic trouble codes of emission system, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed mechanic tool with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble emission codes in seconds after you fixed the problem. This device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Pls confirm with our customer service whether it is compatible with your vehicle before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Vehicle CEL Doctor】The NT301 obd2 scanner enables you to read DTCs, access to e-missions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle. The fault code will appear again even though you cleared before, if you don't repair the car completely. The fault code only can be cleared by NT301 after car repair finished, as like all the obd2 scanner's working principle.
- 【Read Fault Codes】About the read code funtion needs to be in the ignition on state and if the check engine light is on. If the vehicle is compatible with NT301, please select correct menu & ensure no hardware/wiring issues/obd2 interface damage for accurate results. The correct menu: Select OBDII-> Wait for seconds-> Select Read codes.
- 【Advanced OBDII Modes 】 This car scanner provides enhanced obd2 modes capabilities: O-2 sensors test and EVAP system leak monitor. It allows you to run a leak check on your car’s EVAP system and assess the fuel tank’s condition. The O-2 sensor test helps optimize the air-fuel ratio, boosting fuel economy and cutting em-issions. Saving you money on gas and reducing your vehicle’s environmental footprint.
- 【Live Data Graphing & Accuracy for Most OBD2 Vehicles】View and log live sensor data in graph form—monitor oxygen sensors, fuel trims, coolant temp, RPM, and more. Spot trends and suspicious values in real time. Compatible with most 1996+ gasoline cars, light trucks, and SUVs sold in the U.S., as well as many 2000+ European and Asian models. Also works on 12V diesel vehicles equipped with OBD2. It's a basic code reader and DOESN'T't support to scan ABS, SRS, EPB, A/C systems etc, . It also DOESN'T support ANY special functions like TMS reset/SRS Reset/ABS bleeding/automatic driving/tpms relearn/bluetooth related.
- 【S-mog Check Helper – Know Your Readiness Status at a Glance】With dedicated I/M readiness hotkeys and a simple Red-Yellow-Green LED indicator, you’ll instantly know if your vehicle is ready for em-issions testing. Built-in speaker provides audio feedback. No guesswork—just confidence before you head to the test center.
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
- WIDE COMPATIBILITY – Trusted by YouTube Star Scotty Kilmer. The AD410 OBD2 Scanner supports all 16PIN vehicles that comply with the OBDII protocol, including KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN. This OBD2 code scanner compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles. Multilingual support (English, German, French, Spanish, etc.), this car code reader is ideal for international users. Check compatibility with your vehicle model before purchasing. !!! Powered directly from your vehicle's OBDII connector, this diagnostic tool doesn' t need a battery or charger
- CRITICAL FUNCTIONALITY – Quickly Read & Clear Fault Codes. The obd2 scanner diagnostic tool quickly reads and clears stored emissions-related codes, pending codes, and provides code definitions. With over 42,000 built-in DTC lookups, you can easily identify faults without the need for Google searches. Reset the MIL, check monitor readiness before smog tests, and understand your vehicle's health before costly repairs. !!! Note: Fault codes can be cleared after resolving the underlying issue, the code reader itself does not have a reset function
- ENHANCED OBDII DIAGNOSTICS – Comprehensive System Testing. This engine obd2 scanner diagnostic tool offers advanced diagnostics, including testing of O2 sensors and EVAP systems. Perform a leak test on your vehicle's EVAP system and monitor the fuel tank's integrity. The O2 sensor test helps fine-tune the air/fuel mixture, improving fuel efficiency and reducing emissions—saving you money at the pump and reducing your car's environmental impact. !!! Note: The AD410 is only an engine code reader, it DOESN'T support other systems such as ABS, SRS, Transmission and others
- QVGA DISPLAY & NEW UI – User-Friendly Interface. The OBD scanner for car boasts a 2.4 TFT true-color LCD display (262K) for clear, easy-to-read results. With an intuitive UI design, you can quickly access OBDII diagnostics, I/M readiness checks, DTC search, and setup options. No need to read a manual—this user-friendly auto diagnostic code scanner is perfect for beginners, mechanic and seasoned users alike
- EASY TO USE – Locate the vehicle’s OBD-II port (typically found under the steering wheel, near the dashboard, or inside the fuse box). Insert the 16-pin connector firmly into the port to ensure a secure physical connection. Power on the vehicle (some devices require the engine to be running, while others only need the ignition turned to the ‘ON’ position)—then the item will work. The USB cable is only for updates and is not needed when connected to the vehicle
Last update on 2026-05-23 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-104
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
BMW
of North America, LLC FEB 12, 2024 NHTSA Recall No. : 24V-104 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : BMW
of North America, LLC Address : P.O. Box 1227
Westwood NJ 07675-1227
Company phone : 18005257417
Population :
Number of potentially involved : 79,670 Estimated percentage with defect : 1 %
Vehicle Information : Vehicle 1 : 2023-2023 BMW
X1 xDrive28i Vehicle Type : LIGHT VEHICLES Body Style : SUV Power Train : GAS
Descriptive Information : Approximately 14,679 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : AUG 02, 2022 – OCT 26, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 24V-104 Page 2 Vehicle 2 : 2024-2024 BMW
X5 sDrive40i, X5 xDrive40i, X5 M60i, X5 M Vehicle Type : LIGHT VEHICLES Body Style : SUV Power Train : GAS
Descriptive Information : Approximately 16,970 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : FEB 23, 2023 – OCT 18, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 3 : 2024-2024 BMW
X5 xDrive50e Vehicle Type : LIGHT VEHICLES Body Style : SUV Power Train : HYBRID ELECTRIC
Descriptive Information : Approximately 3,431 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : FEB 23, 2023 – AUG 02, 2023
VIN Range 1 : Begin : NR End : NR Not sequential The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-104 Page 3 Vehicle 4 : 2024-2024 BMW
X6 xDrive40i, X6 M60i, X6 M Vehicle Type : LIGHT VEHICLES Body Style : SUV Power Train : GAS
Descriptive Information : Approximately 2,933 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : FEB 23, 2023 – JUL 29, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2023-2024 BMW
X7 xDrive40i, X7 M60i, XB7 Vehicle Type : LIGHT VEHICLES Body Style : SUV Power Train : GAS
Descriptive Information : Approximately 29,578 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : JUN 29, 2022 – OCT 18, 2023
VIN Range 1 : Begin : NR End : NR Not sequential The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-104 Page 4 Vehicle 6 : 2023-2024 BMW
XM
Vehicle Type : LIGHT VEHICLES Body Style : SUV Power Train : HYBRID ELECTRIC
Descriptive Information : Approximately 2,000 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : NOV 12, 2022 – OCT 18, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 7 : 2024-2024 BMW
530i, 530i xDrive Vehicle Type : LIGHT VEHICLES Body Style : 4-DOOR Power Train : GAS
Descriptive Information : Approximately 127 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : JUN 23, 2023 – JUL 07, 2023
VIN Range 1 : Begin : NR End : NR Not sequential The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-104 Page 5 Vehicle 8 : 2024-2024 BMW
i5 eDrive40, i5 M60 Vehicle Type : LIGHT VEHICLES Body Style : 4-DOOR Power Train : HYBRID ELECTRIC
Descriptive Information : Approximately 92 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : JUN 26, 2023 – JUL 17, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 9 : 2023-2024 BMW
740i, 740i xDrive, 760i xDrive Vehicle Type : LIGHT VEHICLES Body Style : 4-DOOR Power Train : GAS
Descriptive Information : Approximately 7,235 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : JUL 04, 2022 – OCT 05, 2023
VIN Range 1 : Begin : NR End : NR Not sequential The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-104 Page 6 Vehicle 10 : 2023-2024 BMW
i7 eDrive50, i7 xDrive60, i7 M70 Vehicle Type : LIGHT VEHICLES Body Style : 4-DOOR Power Train : HYBRID ELECTRIC
Descriptive Information : Approximately 2,599 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : JUL 04, 2022 – SEP 06, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 11 : 2024-2024 BMW
750e xDrive Vehicle Type : LIGHT VEHICLES Body Style : 4-DOOR Power Train : HYBRID ELECTRIC
Descriptive Information : Approximately 16 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : JUN 20, 2023 – JUL 07, 2023
VIN Range 1 : Begin : NR End : NR Not sequential The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-104 Page 7 Vehicle 12 : 2024-2024 Rolls-Royce
Spectre Vehicle Type : LIGHT VEHICLES Body Style : 2-DOOR Power Train : HYBRID ELECTRIC
Descriptive Information : Approximately 10 vehicles have been assembled with an integrated brake system that may not function according to specifications. Basis for recall population determination: Vehicle assembly information and supplier production records were reviewed to determine the production dates of potentially affected vehicles. Recall component difference to non-recall component: The integrated brake system may not function according to specifications. Production Dates : JUN 20, 2023 – JUL 14, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : The integrated brake (IB) system may not function according to specifications, and a reduction in the power assist function could occur. If this reduction occurs, the Antilock Brake System (ABS) and Dynamic Stability Control (DSC) system may not function. Fully mechanical braking is not affected, and is still available to slow and stop the vehicle. The emergency function of brake force distribution is also not affected, and is available to help control vehicle stability. Also, the parking (emergency) brake would be automatically activated to aid in braking performance and help maintain vehicle stability and control.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : If the IB system was not functioning properly, this could lead to an extended stopping distance. If the ABS and/or DSC was not functioning properly, this could affect vehicle handling and control. These conditions could increase the risk of a crash.
Description of the Cause : NR Identification of Any Warning
that can Occur : A warning lamp and message will be illuminated in the instrument cluster. Involved Components : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-104 Page 8 Component Name 1 : Integrated Brake Module Component Description : Integrated Brake Module
Component Part Number : 5A8D899, 5A8D8A9, 5A8D8B0, 5A8D8B9, 5A8D8E0 Supplier Identification : Component Manufacturer
Name : Continental Automotive Technologies GmbH Address : Guerickestrasse 7
Frankfurt Foreign States 60487
Country : Germany Chronology :
Please refer to the separate document, which forms a part of this report, that contains the chronology. Description of Remedy :
Description of Remedy Program : The integrated brake system will be replaced. Owners will be notified by First Class mail and instructed to take their vehicles to an authorized BMW
center / Rolls-Royce
Motor Cars dealer to have the remedy performed for free. If this condition were to occur on a potentially affected vehicle prior to this recall, the remedy would be covered by the BMW
/ Rolls-Royce
Motor Cars New Vehicle Limited Warranty program. Therefore, reimbursement for a pre-notification remedy re Part 573.13 and Part 577.11 is not necessary. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : Recalled Component: Integrated Brake Module – p/n – vehicle model dependent (5A8D899, 5A8D8A9, 5A8D8B0, 5A8D8B9, 5A8D8E0)
NR Recall Schedule :
Description of Recall Schedule : Notification to dealers is planned to begin and end on February 12, 2024.
Notification to owners is planned to begin and end on April 5, 2024. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-104
Page 9
The information contained in this report was submitted pursuant to 49 CFR §573 Planned Dealer Notification Date : FEB 12, 2024 – FEB 12, 2024 Planned Owner Notification Date : APR 05, 2024 – APR 05, 2024
* NR – Not Reported
**************************************************************************************************************
2/22/24, 3:48 PM 34 04 23_RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
about:blank 1/7
SIB 34 04 23
RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
2024-02-22
This Service Information Bulletin (Revision 3) replaces SI B34 04 23 dated February 2024.
Please perform the procedure outlined in this Service Information on all affected vehicles before customer
delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure
the next time the vehicle is in the shop if the campaigns have a status of remedy available. Otherwise,
please release the vehicle.
☐ THIS REPAIR IS MOBILE FRIENDLY
What’s New:
Subject
Model
Attachments
MODEL
F95 LCI (X5 M Sports
Activity Vehicle)
F96 LCI (X6 M Sports
Activity Coupe)
G05 LCI (X5 Sports
Activity Vehicle)
G06 LCI (X6 Sports
Activity Coupe)
G07 LCI (X7 Sports
Activity Vehicle)
G09 (XM Sports
Activity Vehicle)
G60 (5 Series Sedan
& i5 Sedan)
G70 (7 Series Sedan
& i7 Sedan)
U11 (X1 Sports Activity
Vehicle)
AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in
AIR, AWP, Campaign Summary, or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. As of December 21, 2023,
you can see a list of affected vehicles in Inventory Campaign Details (ICD) under ROSS.
SITUATION
In very rare cases, brake assistance and brake assistance systems may fail.
The brake warning lamps light up and the following check control message appears:
“Continuation is possible. Braking system and driving stabilization. Avoid abrupt braking as much as
possible. Drive moderately. Higher pedal force may be required for braking. Have it checked by the nearest
service partner.”
CAUSE
The Integrated Brake (IB) may not have been produced by the supplier according to specifications, and
therefore may not function properly.
Copyright ©2024 BMW
of North America, Inc.
2/22/24, 3:48 PM 34 04 23_RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
about:blank 2/7
CORRECTION
Replace the Integrated Brake, aka brake booster or power brake.
PROCEDURE
Replace the Integrated Brake as per REP34 51 601 “Replacing hydraulic unit”.
PARTS INFORMATION
Use and invoice the applicable part numbers below.
Refer to the weekly Parts Matrix for the most up-to-date ordering information.
Series Part Numbers Description Quantity
U11
34 50 5A8D899 Power brake 1
34 50 5A59585 Brake booster seal 1
07 11 9905374 Self-locking collar nut 2
07 11 9904670 Self-locking collar nut 1[A1]
07 11 9905147 hexagonal screw with disc 1
F95, F96,
G05, G06,
G07, G09
34 50 5A8D8E0 Power brake 1
34 51 6893390 Brake booster seal 1
07 14 6890655 Self-locking collar nut 2
G60
34 50 5A8D8B9 Power brake 1
34 51 6893390 Brake booster seal 1
07 14 9904295 Self-locking collar nut 2
51 71 6966566 Hexagonal screw with flange 4
51 64 8076922 Hexagonal screw with disc 4
G70
34 50 5A8D8A9 Power brake 1
34 51 6893390 Brake booster seal 1
07 14 9904295 Self-locking collar nut 2
51 71 6966566 Hexagonal screw with flange 2
51 64 8076922 Hexagonal screw with disc 2
Sublet – Bulk Materials
Part Number Description Quantity
81 22
0142156 BMW
DOT Brake Fluid (12 oz bottle) Sublet as needed
83 19
2451316
BMW
Group Non-Chlorinated Brake Parts Cleaner- 10% VOC
– (15 oz) Sublet as needed
CLAIM INFORMATION
Vehicle Programming and ECnocpoydriignhgt ©2024 BMW
of North America, Inc.
2/22/24, 3:48 PM 34 04 23_RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
about:blank 3/7
During this workshop visit, the affected vehicle may also show one or more programming and
encoding Technical Campaign repairs open, the programming and encoding procedure may only be
invoiced one time.
After replacing the integrated braking system (IB), select this open Technical Campaign to
perform and submit for updating the vehicle to a required I-level or higher, when applicable
(Includes labor operation codes 00 00 006/556, 61 21 528 and 61 00 730).
Please be sure to also perform any additional before and/or after work (including attaching
labels) as required by the other open campaigns on the vehicle. Close any remaining open
programming and encoding Campaign repairs as outlined in the corresponding Service
Information Bulletin.
As determined by the above, reimbursement for this Recall will be via normal claim entry utilizing the
applicable work package information below and the part numbers listed above that apply.
Repair Code: 0034670200 —
Below are the special flat rate labor operation code choices for this action. Refer the attachment for
the interim FRU allowance information (**) only until they become available in AIR.
Completion before the first vehicle delivery to a customer or the vehicle is already in the workshop.
Work Pkg Labor Operation Description (Plus work) Labor Allowance
# 1 00 75 852
Replace the integrated braking system (IB),
program and encode the vehicle control
units, includes Carrying out vehicle test (00
00 556/61 21 528)
See attachment**
Or:
# 2 00 75 853
Replace the integrated braking system (IB)
(Programming and encoding the vehicle
control units was performed in conjunction
with another campaign/repair during the
same workshop visit)
See attachment**
Or:
The vehicle arrives at your center and this Recall shows open (No other Main work will be performed
or claimed during this workshop visit).
Work Pkg Labor OperatCioonpyDriegshct r©ip2t0io2n4 (BMMaiWn w oof rNko) rth America, Inc. Labor Allowance
2/22/24, 3:48 PM 34 04 23_RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
about:blank 4/7
# 3 00 75 268
Replace the integrated braking system (IB),
program and encode the vehicle control
units, includes Carrying out vehicle test (00
00 006/61 21 528)
See attachment**
Or:
# 4 00 75 269
Replace the integrated braking system (IB)
(Programming and encoding the vehicle
control units was performed in conjunction
with another campaign/repair during the
same workshop visit)
See attachment**
Only one of the flat rate labor operation codes listed above can be used for claim
submission/reimbursement purposes. Also, only one Main work flat rate labor operation code can be
claimed per workshop visit
.
Claim Repair Comments
Only reference the SIB number and the work package (Pkg) number performed in the technician’s
RO notes and in the claim comments (For example: B34 04 23 WP 1), unless otherwise required by
State law.
Sublet – Bulk Materials (RO and Claim Comments Required)
Sublet Code
4
See the sublet
reimbursement
calculations below
Reimbursement for the repair-related bulk materials (Do not
use the BMW
part numbers for claim submission)
Sublet reimbursement calculation for claiming the applicable repair-related bulk materials (BMW
part
numbers) is at the dealer net price amount for the proportional quantities used plus your center’s handling.
Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
Vehicle Programming and Encoding – Additional Work (RO and Claim Comments Required)
This procedure automatically reprograms and encodes any vehicle control modules that do not have
the latest software I-level.
If one or more control modules fail during the reprogramming procedure, claim the required consequential
repair work procedures to address this issue (including performing the IRAP Control Unit Recovery first as
required, refer to the SIB in AIR) under the Repair Code in this bulletin together with the corresponding labor
operation codes and their flat rate unit (FRU) allowance(s), including the diagnosis* that applies.
Copyright ©2024 BMW
of North America, Inc.
2/22/24, 3:48 PM 34 04 23_RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
about:blank 5/7
Please explain the additional work procedures that were performed (The why and the what) on the
repair order and in the claim comments.
For covered repairs that address control module failures that occurred prior to performing this
reprogramming procedure, claim this work with the Repair Code listed in AIR together with the
corresponding labor operation codes and their flat rate unit (FRU) allowance(s), including the diagnosis* that
applies.
(*) Based on which one applies to your center, please refer to SI B01 01 20 or B01 07 20 for the
applicable procedure for documenting, claiming, and explaining, on the RO and in the claim
comments, your diagnosis work time (WT), job/repair work time (WT), and the vehicle repairs your
center performed, unless otherwise required by State law.
Alternative Mobility Solution (AMS) for Vehicle Owners (RO and Claim Comments Required)
This Recall repair qualifies for Alternative Mobility Solution (AMS) expense reimbursement, claim this item
under the Defect Code noted above as follows:
Sublet Code 2 – Itemize the AMS sublet amount on the repair order and in the claim comment
section.
Please refer to SI B01 29 16 for additional information.
Reimbursement of Prior Customer-Pay Repairs (TREAD Act)
Based on the issue and age of the Affected Vehicles being addressed by this Safety Recall Campaign, a
reimbursement request for a qualifying prior customer-pay repair is not likely.
However, if you should receive a reimbursement request from a customer for a repair that may qualify
because it addressed the issue described in this bulletin, and it was performed prior to the notification of
Recall, please contact the Warranty department (include a legible copy of the invoice) through IDS by
selecting Coverage, Policy, Coding Questions and Mileage Corrections. The Warranty department will
respond to your inquiry accordingly.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
Warranty Feedback
To submit feedback for the CLAIMS section of this bulletin: Submit an
IDS ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
Parts Feedback To submit feedback for the PARTS section of this bulletin: Submit an
IDS ticket to the Parts Department
Supporting Materials
picture_as_pdf B34 04 23_RECALL 24V-104_ INTEGRATED BRAKE SYSTEM (IB).pdf
picture_as_pdf B340423 AttacCho 1p yIrnigtehrti m© 2F0R2U4 IBnMfoWrm oaft iNono.rpthd fAmerica, Inc.
2/22/24, 3:48 PM 34 04 23_RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
about:blank 6/7
picture_as_pdf B340323 24V-104-IB-FAQ-(22Feb2024).pdf
Copyright ©2024 BMW
of North America, Inc.
2/22/24, 3:48 PM 34 04 23_RECALL 24V-104: INTEGRATED BRAKE SYSTEM (IB)
about:blank 7/7
Copyright ©2024 BMW
of North America, Inc.
February 2024
1
Attachment 1 to SI B34 04 23
Interim FRU Allowance Information (Only until they become available in AIR)
To determine the BMW
labor allowance for the special flat rate labor operation code choice below for this
action, use “CTL F” to search:
• WVI: AG Model Code (MC)
• AIR: Lead Type (LT)
Work Package # 1 – 00 75 852
Labor Operation Series AG MC/LT FRU Model
00 75 852 F95 13ET 30 X5 M Comp
00 75 852 F96 23ET 30 X6 M Comp
00 75 852 G05 13EU 30 X5 sDrive40i
00 75 852 G05 23EU 30 X5 xDrive40i
00 75 852 G05 33EU 30 X5 M60i
00 75 852 G05 43EU 29 X5 xDrive50e
00 75 852 G06 33EX 30 X6 xDrive40i
00 75 852 G06 43EX 30 X6 M60i
00 75 852 G07 23EM 28 X7 xDrive40i
00 75 852 G07 33EM 28 X7 M60i
00 75 852 G07 43EM 28 X7 ALPINA
XB7
00 75 852 G09 23CS 27 XM
00 75 852 G09 33CS 27 XM Label
00 75 852 G60 33FK 28 i5 eDrive40
00 75 852 G60 43FJ 27 530i Sedan
00 75 852 G60 43FK 28 i5 M60
00 75 852 G60 53FJ 27 530i xDrive Sedan
00 75 852 G70 23EH 27 740i Sedan
00 75 852 G70 33EH 27 740i xDrive Sedan
00 75 852 G70 33EJ 27 760i xDrive Sedan
00 75 852 G70 43EH 28 750e xDrive Sedan
00 75 852 G70 43EJ 28 i7 eDrive50 Sedan
00 75 852 G70 53EJ 28 i7 xDrive60 Sedan
00 75 852 G70 83EH 28 i7 M70
00 75 852 U11 73EF 36 X1 xDrive28i
Attachment 1 to SI B34 04 23 February 2024
2
Interim FRU Allowance Information (Only until they become available in AIR)
To determine the BMW
labor allowance for the special flat rate labor operation code choice below for this
action, use “CTL F” to search:
• WVI: AG Model Code (MC)
• AIR: Lead Type (LT)
Work Package # 2 – 00 75 268
Labor Operation Series AG MC/LT FRU Model
00 75 268 F95 13ET 31 X5 M Comp
00 75 268 F96 23ET 31 X6 M Comp
00 75 268 G05 13EU 31 X5 sDrive40i
00 75 268 G05 23EU 31 X5 xDrive40i
00 75 268 G05 33EU 31 X5 M60i
00 75 268 G05 43EU 30 X5 xDrive50e
00 75 268 G06 33EX 31 X6 xDrive40i
00 75 268 G06 43EX 31 X6 M60i
00 75 268 G07 23EM 30 X7 xDrive40i
00 75 268 G07 33EM 30 X7 M60i
00 75 268 G07 43EM 30 X7 ALPINA
XB7
00 75 268 G09 23CS 29 XM
00 75 268 G09 33CS 29 XM Label
00 75 268 G60 33FK 29 i5 eDrive40
00 75 268 G60 43FJ 29 530i Sedan
00 75 268 G60 43FK 29 i5 M60
00 75 268 G60 53FJ 29 530i xDrive Sedan
00 75 268 G70 23EH 29 740i Sedan
00 75 268 G70 33EH 29 740i xDrive Sedan
00 75 268 G70 33EJ 29 760i xDrive Sedan
00 75 268 G70 43EH 29 750e xDrive Sedan
00 75 268 G70 43EJ 29 i7 eDrive50 Sedan
00 75 268 G70 53EJ 29 i7 xDrive60 Sedan
00 75 268 G70 83EH 29 i7 M70
00 75 268 U11 73EF 37 X1 xDrive28i
Attachment 1 to SI B34 04 23 February 2024
3
Interim FRU Allowance Information (Only until they become available in AIR)
To determine the BMW
labor allowance for the special flat rate labor operation code choice below for this
action, use “CTL F” to search:
• WVI: AG Model Code (MC)
• AIR: Lead Type (LT)
Work Package # 3 – 00 75 853
Labor Operation Series AG MC/LT FRU Model
00 75 853 F95 13ET 22 X5 M Comp
00 75 853 F96 23ET 22 X6 M Comp
00 75 853 G05 13EU 22 X5 sDrive40i
00 75 853 G05 23EU 22 X5 xDrive40i
00 75 853 G05 33EU 22 X5 M60i
00 75 853 G05 43EU 21 X5 xDrive50e
00 75 853 G06 33EX 22 X6 xDrive40i
00 75 853 G06 43EX 22 X6 M60i
00 75 853 G07 23EM 20 X7 xDrive40i
00 75 853 G07 33EM 20 X7 M60i
00 75 853 G07 43EM 20 X7 ALPINA
XB7
00 75 853 G09 23CS 19 XM
00 75 853 G09 33CS 19 XM Label
00 75 853 G60 33FK 20 i5 eDrive40
00 75 853 G60 43FJ 20 530i Sedan
00 75 853 G60 43FK 20 i5 M60
00 75 853 G60 53FJ 20 530i xDrive Sedan
00 75 853 G70 23EH 20 740i Sedan
00 75 853 G70 33EH 20 740i xDrive Sedan
00 75 853 G70 33EJ 20 760i xDrive Sedan
00 75 853 G70 43EH 20 750e xDrive Sedan
00 75 853 G70 43EJ 20 i7 eDrive50 Sedan
00 75 853 G70 53EJ 20 i7 xDrive60 Sedan
00 75 853 G70 83EH 20 i7 M70
00 75 853 U11 73EF 28 X1 xDrive28i
Attachment 1 to SI B34 04 23 February 2024
4
Interim FRU Allowance Information (Only until they become available in AIR)
To determine the BMW
labor allowance for the special flat rate labor operation code choice below for this
action, use “CTL F” to search:
• WVI: AG Model Code (MC)
• AIR: Lead Type (LT)
Work Package # 4 – 00 75 269
Labor Operation Series AG MC/LT FRU Model
00 75 269 F95 13ET 23 X5 M Comp
00 75 269 F96 23ET 23 X6 M Comp
00 75 269 G05 13EU 23 X5 sDrive40i
00 75 269 G05 23EU 23 X5 xDrive40i
00 75 269 G05 33EU 23 X5 M60i
00 75 269 G05 43EU 22 X5 xDrive50e
00 75 269 G06 33EX 23 X6 xDrive40i
00 75 269 G06 43EX 23 X6 M60i
00 75 269 G07 23EM 22 X7 xDrive40i
00 75 269 G07 33EM 22 X7 M60i
00 75 269 G07 43EM 22 X7 ALPINA
XB7
00 75 269 G09 23CS 20 XM
00 75 269 G09 33CS 20 XM Label
00 75 269 G60 33FK 22 i5 eDrive40
00 75 269 G60 43FJ 21 530i Sedan
00 75 269 G60 43FK 22 i5 M60
00 75 269 G60 53FJ 21 530i xDrive Sedan
00 75 269 G70 23EH 21 740i Sedan
00 75 269 G70 33EH 21 740i xDrive Sedan
00 75 269 G70 33EJ 21 760i xDrive Sedan
00 75 269 G70 43EH 22 750e xDrive Sedan
00 75 269 G70 43EJ 22 i7 eDrive50 Sedan
00 75 269 G70 53EJ 22 i7 xDrive60 Sedan
00 75 269 G70 83EH 22 i7 M70
00 75 269 U11 73EF 29 X1 xDrive28i
Attachment to B34 04 23 February 2024
Safety Recall
24V-104
Integrated Brake (IB)
Model Year 2023-2024
BMW
5 Series, 7 Series
BMW
X1, X5, X6, X7, XM
Issue Date: 02/22/2024
Q1. Which BMW
Group models in the US are potentially affected by this Safety Recall?
Certain Model Year 2023-2024 BMW
5 Series, 7 Series, X1, X5, X6, X7, and XM models in the US are potentially
affected.
Q2. What is the specific issue?
The Integrated Brake (IB) module may not function according to specifications. If this happens, a warning lamp
and message will be displayed in the instrument cluster. There will be a reduction in power assist braking, which
could lead to an extended stopping distance and increase the risk of a crash. The Antilock Brake System (ABS)
and Dynamic Stability Control (DSC) system may also not function, which could affect vehicle handling and
control. Please note that higher pedal force may be required.
However, fully mechanical braking is not affected. If the IB module is not functioning properly, the parking
(emergency) brake will be automatically activated to aid in braking performance. Also, the emergency function
of the brake force distribution system remains available to help maintain vehicle stability and control.
If you notice any of these conditions, your vehicle may be experiencing this issue. Please drive carefully,
and avoid abrupt braking as much as possible. Please contact an authorized BMW
center as soon as
possible to have the vehicle remedied.
If you are not the only driver of this vehicle, please advise all other drivers and passengers of this
important information.
Q3. Why are other models / vehicles not included in this Safety Recall?
Other models have an Integrated Brake (IB) system that was produced to specifications by the supplier.
Q4. Can I continue to drive my vehicle?
Yes. However, when you are notified by BMW
of this Safety Recall that a remedy is available, please contact an
authorized BMW
center to schedule an appointment as soon as possible. For the latest updates to this Safety
Recall, please visit bmwusa.com/recall. If you are not the only driver of this vehicle, please advise all other
drivers of this important information.
Q5. How did BMW
Group become aware of the issue?
BMW
Group became aware of the issue through its quality control procedures.
Q6. How will I be informed of this Safety Recall?
Owners of potentially affected vehicles will be notified via First Class mail advising them of this Safety Recall.
When parts become available, they will receive another letter, requesting that they schedule an appointment
with an authorized BMW
center as soon as possible to have this Safety Recall performed. For the latest updates
to this Safety Recall, please visit bmwusa.com/recall.
To ensure BMW
has the most up-to-date contact and vehicle information, owners should register their vehicle
at bmwusa.com/myBMW. Registration is free and will give them access to other information specific for their
BMW
vehicle. Alternatively, owners can visit bmwusa.com/recall and click on “Manage recall notices and
contact information”.
Q7. How will my vehicle be remedied?
When the remedy is available, potentially affected vehicles will have the Integrated Brake (IB) system replaced
for free which should take several hours.
Q8. Do I have to wait for BMW
to contact me to have the remedy performed?
Yes. We are in the process of implementing this Safety Recall to ensure that the necessary parts, tools, and
procedures are available. For the latest updates to this recall, please visit bmwusa.com/recall.
**************************************************************************************************************
From: Broadcast Messaging System
To: DL-BMS_Message_Monitors
Subject: BMW
Recall 24V-xxx: Integrated Brake System
Date: Thursday, February 8, 2024 2:23:52 PM
Publish Date:
From:
Expiration Date:
February 8, 2024
Technical Service
February 22, 2024
DCSnet Message
Urgent
Subject: BMW
Recall 24V-xxx: Integrated Brake System
BMW
AG has issued a Delivery Stop (effective December 20, 2023) on certain Model Year 2023 –
2024 BMW
vehicles that were produced between June 29, 2022, and October 26, 2023.
As of February 8, 2024, this Delivery Stop has been upgraded to a Safety Recall. The VIN list
has been expanded, please re-check your inventory vehicles.
The Integrated Brake (IB) system may not have been produced by the supplier according to
specifications, and therefore may not function properly.
The revised Bulletin, Recall Notice and Q&A have been attached for further information.
The bulletin will be updated when additional information becomes available.
Sincerely,
Technical Service
Attachments: B340423_Rev01[1707420032490].pdf
B340423 Recall Notice[1707420032490].pdf
B340423 24V-xyz-IB-FAQ-(08Feb2024)[1707420032490].pdf
B340423_Rev01[1707420032490].pdf
B340423 Recall Notice[1707420032490].pdf
B340423 24V-xyz-IB-FAQ-(08Feb2024)[1707420032490].pdf
Recipients: BMW
Passenger Cars, All Offering, All Region, All Areas, All Departments, All Personnel
BMW
SAV (Light Trucks), All Offering, All Region, All Areas, All Departments, All Personnel
BMW
i, All Offering, All Region, All Areas, All Departments, All Personnel
BMW
Passenger Cars CC-All
2/12/24, 11:44 AM 34 04 23_RECALL 24V-XXX: INTEGRATED BRAKE SYSTEM
about:blank 1/2
SIB 34 04 23
RECALL 24V-XXX: INTEGRATED BRAKE SYSTEM
2024-02-08
What’s New:
Title changed
This Delivery Stop has been upgraded to a Safety Recall
Production range updated
Situation section updated
Recall Notice and FAQ added
MODEL
F95 (X5 M Sports Activity Vehicle) G09 (XM Sports Activity Vehicle)
F96 (X6 M Sports Activity Coupe) G60 (5 Series Sedan & i5 Sedan)
G05 (X5 Sports Activity Vehicle) G70 (7 Series Sedan & i7 Sedan)
G06 (X6 Sports Activity Coupe) U11 (X1 Sports Activity Vehicle)
G07 (X7 Sports Activity Vehicle)
AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR,
AWP, Campaign Summary or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. As of December 21, 2023, you can
see a list of affected vehicles in Inventory Campaign Details (ICD) under ROSS.
SITUATION
BMW AG has issued a Delivery Stop (effective December 20, 2023) on certain Model Year 2023 – 2024
BMW vehicles that were produced between June 29, 2022, and October 26, 2023.
As of February 8, 2024, this Delivery Stop has been upgraded to a Safety Recall
The Integrated Brake (IB) system may not have been produced by the supplier according to specifications,
and therefore may not function properly.
Do not deliver to a customer, a New, Certified Pre-Owned or Used vehicle subject to a Delivery Stop,
until the vehicle is repaired. Do not use or sell replacement equipment/parts subject to a Delivery
Stop.
The Recall Notice and Q&A have been attached for further information.
The bulletin will be updated when additional information becomes available.
Supporting Materials
picture_as_pdf B340423 Recall Notice.pdf
picture_as_pdf B340423 24V-xyz-IB-FAQ-(08Feb2024).pdf
Copyright ©2024 BMW of North America, Inc.
2/12/24, 11:44 AM 34 04 23_RECALL 24V-XXX: INTEGRATED BRAKE SYSTEM
about:blank 2/2
Copyright ©2024 BMW of North America, Inc.
Attachment to B34 04 23 February 2024
SAFETY RECALL NOTICE
To: All Center Operators, Sales Managers, Service Managers, Parts Managers and Warranty
Processors
RE: Recall 24V-XXX: Integrated Brake System – B34 04 23
BMW AG has issued a Delivery Stop (effective December 20, 2023) on certain Model Year 2023
– 2024 BMW vehicles that were produced between June 29, 2022, and October 26, 2023.
As of February 8, 2024, this Delivery Stop has been upgraded to a Safety Recall
Please be reminded that it is a violation of federal law (The Safety Act) for you to sell,
lease or deliver any new motor vehicle covered by this notification until the recall repair
has been performed. This means that Centers may not legally deliver new motor
vehicles to consumers until they are fixed or use/sell replacement equipment/parts
subject to this recall. Note also that substantial civil penalties apply to violations of the
Safety Act.
Also, you should not sell, lease or deliver any Certified Pre-Owned or used vehicles
subject to a safety recall until the repair is completed.
Please follow any special instructions that we provide to you for the return or disposition
of recall parts.
We appreciate all your assistance with this Recall.
Attachment to B34 04 23 February 2024
Safety Recall
24V-xyz
Integrated Brake (IB)
Model Year 2023-2024
BMW 5 Series, 7 Series
BMW X1, X5, X6, X7, XM
Issue Date: 02/08/2024
Q1. Which BMW Group models in the US are potentially affected by this Safety Recall?
Certain Model Year 2023-2024 BMW 5 Series, 7 Series, X1, X5, X6, X7, and XM models in the US are potentially affected.
Q2. What is the specific issue?
The Integrated Brake (IB) system may not have been produced by the supplier according to specifications. If the IB system
was not functioning properly, a warning lamp and message will be displayed in the instrument cluster. In some cases, the
vehicle may not be able to be started. In some cases, there will be a reduction in power assist braking, which could lead to an
extended stopping distance and increase the risk of a crash. The Antilock Brake System (ABS) and Dynamic Stability Control
(DSC) system may not function, which could also affect braking performance as well as vehicle handling and control.
However, fully mechanical braking is not affected and, if the IB system is not functioning properly, the parking (emergency)
brake will be automatically activated to aid in braking performance and help maintain vehicle stability and control.
If your notice any of these conditions, your vehicle may be experiencing this issue. If this occurs, you should carefully
move away from traffic and pull over to a safe location as soon as possible. Do not continue to drive your vehicle. You
should immediately contact BMW Roadside assistance to arrange for pickup and transportation of your vehicle to
the nearest authorized BMW center.
BMW Roadside Assistance may be reached by:
• Calling 1-800-332-4BMW (800-332-4269)
• Pressing your vehicle’s BMW Assist SOS button
• Selecting BMW Roadside Assistance from the BMW Assist menu of ConnectedDrive, or with
the BMW Connected app.
If you are not the only driver of this vehicle, please advise all other drivers and passengers of this important
information.
Q3. Why are other models / vehicles not included in this Safety Recall?
Other models have an Integrated Brake (IB) system that was produced to specifications by the supplier.
Q4. Can I continue to drive my vehicle?
Yes. However, when you are notified by BMW of this Safety Recall that a remedy is available, please contact an authorized
BMW center to schedule an appointment as soon as possible. For the latest updates to this Safety Recall, please visit
bmwusa.com/recall. If you are not the only driver of this vehicle, please advise all other drivers of this important
information.
Q5. How did BMW Group become aware of the issue?
BMW Group became aware of the issue through its quality control procedures.
Q6. How will I be informed of this Safety Recall?
Owners of potentially affected vehicles will be notified via First Class mail advising them of this Safety Recall. When parts
become available, they will receive another letter, requesting that they schedule an appointment with an authorized BMW
center as soon as possible to have this Safety Recall performed. For the latest updates to this Safety Recall, please visit
bmwusa.com/recall.
To ensure BMW has the most up-to-date contact and vehicle information, owners should register their vehicle at
bmwusa.com/myBMW. Registration is free and will give them access to other information specific for their BMW vehicle.
Alternatively, owners can visit bmwusa.com/recall and click on “Manage recall notices and contact information”.
Q7. How will my vehicle be remedied?
When the remedy is available, potentially affected vehicles will have the Integrated Brake (IB) system replaced for free which
should take several hours.
Q8. Do I have to wait for BMW to contact me to have the remedy performed?
Yes. We are in the process of implementing this Safety Recall to ensure that the necessary parts, tools, and procedures are
available. For the latest updates to this recall, please visit bmwusa.com/recall.
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





