| SI B17 01 03 Cooling Systems | September 2003 Service Engineering |
Coolant Level Warning Light On
MODEL
| X5 with 4.4 and 4.6 liter engine from start of production to 4/20/03 |
SITUATION
Certain X5 vehicles equipped with the 4.4 or 4.6 liter M62TU engine may have the coolant warning light illuminated, even when the actual coolant level is sufficient. Troubleshooting leads to replacement of the coolant level sensor. Within a short time, the vehicle may return to the workshop with the same complaint.
CAUSE
![]() | Insufficient clearance between underside of the coolant expansion tank (2) and the support bracket (1) as indicated by the arrow in illustration. Contact between the bracket and the coolant level sensor, located on the underside of the expansion tank, causes damage to the sensor which, in turn, leads to warning light illumination. |
![]() | The new part has a cutout in the area of the coolant level sensor which eliminates the area of contact. Note area indicated by arrow. |
CORRECTION
On a customer complaint basis and where there is evidence of sensor to bracket interference, replace the existing bracket with the new modified support bracket currently available through Parts. The part number remains the same as the original part. Additionally, replace the coolant level sensor.
![]() | Follow the procedure for removing and replacing the coolant expansion tank (1) as outlined in Repair Instruction 17 11 100. Tank is secured to bracket by two bolts (2) |
![]() | Remove the two bolts (2) securing the power steering reservoir (3). Position the reservoir away from bracket. Do not disconnect lines. |
![]() | Remove the two bolts (2) securing oil filter housing (1) to bracket (3). |
![]() | Remove the three bolts (2) holding the bracket (1) to the body. Carefully slide bracket around oil filter housing and remove. Install in reverse order. |
PARTS INFORMATION
| Part Number | Description | Quantity |
|---|---|---|
| 51 71 8 250 435 | Coolant Tank support | 1 |
| 17 11 7 506 601 | Leveling Switch | 1 |
| Coolant |
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
| Defect Code | 51 71 97 41 00 | |
|---|---|---|
| Main Labor Operation: | Replace Coolant Tank Support | 00 54 182 |
| Labor Allowance: | 10 FRU | |
| + Associated Labor Operation: | Replace Coolant Tank Support | 00 54 819 |
| Labor Allowance: | 8 FRU | |
| Sublet Code 4 | Sublet Allowance – Coolant | Only amount needed to top off |
- Genuine BMW Antifreeze/Coolant
- Part # 82141467704
- Concentrated Dilution Required
- Contains no nitrates or phosphates, reducing harmful deposit formation.
- Bittering Agent Added
- Reliable
- Professional
- High performance
- BMW Special Formula HT-12 (Green) 1 Gallon
- Suitable for all BMWs
- Required for 2017+ BMWs
- Part #83192468442
- 1 GALLON ENGINE ANTIFREEZE/COOLANT: Fully compatible with other extended life antifreeze/coolants. This item contains a bittering agent called Denatonium Benzoate.
- PROTECTS: Advanced formulation prevents rust & corrosion protecting all cooling system components
- DESIGNED FOR EUROPEAN VEHICLES: Recommended for use with Audi, Porsche, Volkswagen, BMW, Mini, Dodge and Freightliner Sprinter, Jaguar, Land Rover V8 and Diesel, Mercedes-Benz, SAAB, Volvo, Tesla, Smart and other European vehicles that require a BLUE Silicate-Enhanced Hybrid Organic Acid Technology (Si-HOAT) formula
- GUARANTEED: When installed as part of a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.
- 50/50 PREDILUTED FOR QUICK TOP OFFS: Already prediluted to make topping off your cooling system a breeze
- 1 GALLON ENGINE ANTIFREEZE/COOLANT: Fully compatible with other extended life antifreeze/coolants. This item contains a bittering agent called Denatonium Benzoate.
- PROTECTS: Advanced formulation prevents rust & corrosion protecting all cooling system components
- DESIGNED FOR EUROPEAN VEHICLES: Recommended for use with BMW, Jaguar, Volvo, and other European vehicles that require a BLUE Silicate-Enhanced Hybrid Organic Acid Technology (Si-HOAT) formula
- GUARANTEED: When installed as part of a complete flush and fill, PEAK guarantees this coolant will provide service life protection of up to 150,000 miles or 5 years.
- CONCENTRATED FORMULA: Ideal for flushing, filling, or topping off your cooling system
This product presentation was made with AAWP plugin.










