“This site contains affiliate links for which OEMDTC may be compensated” |
April 12, 2023 NHTSA CAMPAIGN NUMBER: 23V260000
Second-Row Seat Belts May Malfunction
A pinched seat belt may not function properly, increasing the risk of injury during a crash.
NHTSA Campaign Number: 23V260
Manufacturer BMW of North America, LLC
Components SEAT BELTS
Potential Number of Units Affected 1,465
Summary
BMW of North America, LLC (BMW
) is recalling certain 2023 X1 xDrive28i, X1 M35i vehicles. On the second-row outboard seats, the seat belts may have been pinched by an interior trim panel during vehicle assembly.
Remedy
Dealers will inspect and adjust the interior trim panel, as necessary, free of charge. Owner notification letters were mailed June 9, 2023. Owners may contact BMW customer service at 1-800-525-7417.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your BMW has a Recall
SIB 72 02 23
2023-07-19
RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
MODEL
E-Series | Model Description | Production Date |
U11 | X1 Sports Activity Vehicle | August 2, 2022 – December 12, 2022 |
AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR, AWP, Campaign Summary or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. You can see a list of affected vehicles in Inventory Campaign Details (ICD) under ROSS.
SITUATION
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW
X1 SAV vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an interior trim panel during vehicle production. This could affect the function of the safety belt and, in rare cases, could increase the risk of injury.
The Recall Notice and Q&A have been attached for further information.
The bulletin will be updated when additional information becomes available.
CAUSE
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an interior C-pillar trim panel, at the bottom, during vehicle production.
CORRECTION
Check the outer rear safety belts (left and right, per areas circled) and rework them if necessary.
Chronology :
On December 22, 2022, during vehicle assembly, an interference between a second row outboard seat safety belt and a vehicle interior trim panel was noticed. A closer examination indicated that a small portion of the belt was pinched by the trim panel in the lower area of the panel near the location of the seat bottom.
Between January and February 2023, efforts were undertaken to understand why the issue may have occurred, and to investigate the possibility of a production process improvement. Various analyses were performed, including vehicle geometry, production system parameters, and production system image techniques.
In March, additional efforts involved engineering analyses including technical assessments. It was suggested that even if the trim panel was interfering with a minor portion of the belt, this might have an affect upon restraint capability. Further reviews were conducted involving images captured during vehicle assembly, and other production and assembly quality information.
Vehicle assembly information was reviewed to determine the number, and production dates, of potentially affected vehicles.
On April 5, 2023, BMW decided to conduct a voluntary safety recall.
BMW has not received any reports, nor is BMW
otherwise aware, of any accidents or injuries related to this issue.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
BMW![]() | X1 | 2023 |
11 Associated Documents
Defect Notice 573 Report
RCLRPT-23V260-9425.PDF 214.131KB
Remedy Instructions and TSB
RCRIT-23V260-3003.pdf 2393.196KB
Recall Acknowledgement
RCAK-23V260-4378.pdf 645.242KB
Manufacturer Notices(to Dealers,etc) – Dealer Message re BMW Recall 23V-xxx: Safety Belt Rear Seat (Left and Right)
RCMN-23V260-5540.pdf 2393.196KB
ISSUED Owner Notification Letter(Part 577)
RCONL-23V260-1357.pdf 709.391KB
Remedy Instructions and TSB
RCRIT-23V260-6447.pdf 2250.18KB
Miscellaneous Document – Model Year 2023 BMW X1 SAV Second Row Outboard Seat Head Restraints In-Car / In-App Communication – Safety Recall Reminder 20 Jul 2023
RMISC-23V260-8504.pdf 59.021KB
Recall Quarterly Report #1, 2023-2
RCLQRT-23V260-7188.PDF 211.134KB
Recall Quarterly Report #2, 2023-3
RCLQRT-23V260-8555.PDF 211.373KB
Recall Quarterly Report #3, 2023-4
RCLQRT-23V260-8456.PDF 211.456KB
Recall Quarterly Report #4, 2024-1
RCLQRT-23V260-8340.PDF 211.561KB
Latest Recalls Documents
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- [Easy to Use--Work out of box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- [5 in 1 Diagnostic Scanner] Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance function.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet. To connect the tool to the App, please DO NOT go to device's Bluetooth settings, instead, open RepairSolutions2 App and follow the instructions on the App to pair the BLCKTEC 430.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- 【Professional 4 Systems Diagnostics】For DIYers addressing typical concerns like engine, transmission, ABS, and SRS, the TOPDON AD500 vehicle scanner provides specialized diagnostic solutions. It effortlessly interprets and eliminates fault codes and scrutinizes data streams, ensuring the prompt detection of issues.
- 【6 Reset Functions】The AD500 car diagnostic tool offers essential features like Oil Reset, Throttle Adaptation, SAS/TPMS/BMS/EPB Reset. Easily reset oil change indicators, fine-tune throttle response, and recalibrate steering angle sensors for optimal vehicle performance and maintenance convenience.
- 【Works Easier with AD500】The AD500 scanner combines a 5” touchscreen with buttons for easier and seamless operation. Elevate your diagnostic experience with DTC Lookup, Diagnostic data record, and printing diagnostic reports via email. Stay up to date with lifetime free upgrades via Wi-Fi, ensuring your tool is always equipped with the latest features.
- 【Fast Diagnostics, Instant Support】With AutoVIN, instantly obtain crucial vehicle details for expedited diagnostic processes. The AD500 code reader not only facilitates data stream recording for later review but also acts as a battery voltage monitor, providing valuable insights into your vehicle's battery health. If you encounter any diagnostic hurdles, share feedback with TOPDON for prompt professional support.
- 【Unlock FCA Secure Gateway】Supports cutting-edge CAN FD protocol, making it compatible with modern vehicles including 2020+ GM & Chrysler. It bypasses the FCA Secure Gateway to stay up to date with newer models from Chrysler, Jeep, Fiat, and others.
- 【UPGRADE OF NT604-POWERFUL 5 RESETS】Wanna to do maintenance service for your car however the basic 4 system scanner tool can't do it? Then FOXWELL NT614 Elite-the upgraded version of nt604, was born for providing you with 5 special functions-ABS Bleeding/Oil Reset/SAS Calibration/EPB Reset/Throttle Reset. These functions are enough for your daily needs. No need to buy those 300-600 dollors obd2 scanner. Saving your unnecessary repair fee with FOXWELL nt614 car scanner diagnostic tool!
- 【ENGINE/ABS/SRS/TRANSMISSION CODE READER】Don't know what's wrong with your car when the warning light of ABS, transmission, SRS, Engine flashes? NT614 Elite obd2 scanner can pinpoint the problem components. It boasts many functions of engine, abs, srs and transmission such as read & erase fault codes and grapgh live data like engine temp, wheel speed sensor, read transmission temperature, etc. Compared with car repairs, using foxwell nt614 elite is more convenient and a-ffordable.
- 【Best Bang For Your Buck!-FOXWELL NT614 Elite】1. 2025 New software-faster than old one. 2. One click lifetime WIFI f-ree update, no need to use the annoying Micro SD card. 3. New Update-No need to register on the FOXWELL website before use, more convenient! 4. More intuitive viewing with new interface, you can find I/M, Battery Test, DTC Lookup directly.
- 【ABS BLEEDING OBD SCANNER】Do you always feel the brake pedal was slowly sinking to floor or it's loose after doing a complete front & rear brake job? And then you need to take more time than normal to stop your car, which is very dangerous. That's because when you open the brake system to replace components, air gets inside. To get a firm brake pedal, the air need to be removed by bleeding the brakes. NT614 Elite odb2 scanner can do ABS BLEEDING perfectly for your cars.
- 【SMART AUTOVIN & LIFETIME F-REE WIFI UPDATE & PERFECT GIFT CHOICE】With the fantastic AUTOVIN function, this nt614 scan tool can get your VIN and vehicle info rapidly. No need to spend much time in finding your VIN and input it one by one. Also, the lifetime f-ree wifi update is provided for more vehicle coverage, bug fixes, newly added parameters. SAVE AT LEAST 1000+ PER YEAR. And this automotive scanner is a best gift for your Dad, Husband, Boyfriend and Handy Men.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 V2.0 Elite car diagnostic scanner and give your lover a surprise!*R each us to Get the Extra Gifts :Protective Case Storage Bag.
- 【2025 Newly Added 3 Reset Functions】CRP123 V2.0 obd2 scanner with upgrades it offers Throttle Adaptation,Oil Reset and SAS Reset functions for FREE now!! Optimize your engine performance with Throttle Adaptation, reset your oil life system with ease to save time and money on maintenance, and enhance your vehicle's handling and safety with SAS Reset.Covering more daily repairs,become the most cost-effective product in its price range,save your time and money!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 V2.0 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 v2.0 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- 【Designed for Volkswagen(VAG) Cars Diagnostics】The VD500 OBD2 scanner is specifically designed to diagnose Volkswagen Group (Fits for VW/Audi/Skoda/ SEAT) 12-volt 16-pin vehicles, but can also be used with other 12-volt (non-Volkswagen) and light trucks (non-electric) vehicles manufactured in 1996 or later that are OBD II -compliant with standard 16-pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN)
- 【Basic + Special Advanced Functions for VAG Vehicle】The ANCEL VD500 scan tool for vw can not only read and clear codes on engine, ABS, transmission, SAS (not all cars), ESP, TPMS and other systems, but also reset the oil, brake pad(epb service) and throttle position adaption. If you don't know how to do it, please con-tact us in time. Include your car model, year and the function you want to do
- 【Plug and Play, No Complex Connection】The ANCEL VD500 is truly plug-and-play—no complicated networking or batteries required. Simply connect it and use it anywhere in your car, anytime. Fast, easy, and convenient
- 【Full Access, No Hidden Costs】Unlike other detectors that charge extra for features, the ANCEL VD500 is 100% no extra additional charges, with no hidden costs. The full functionality is accessible, and the system upgrade is included, a favorite choice among customers
- 【Wide Compatibility for Volkswagen Cars】The VD500 diagnostic scanner for audi offering for Volkswagen vehicles covers the following vehicles: fits for VW (CC, EOS, Golf, GTI, Jetta, Passat, Phaeton, Polo, Rabbit, Sharan, Tiguan, Touran, Touareg); fits for Audi (A3, A4, A6, A7, A8, A5, Q3, Q5, Q7, R8, RS3, TT, RS, RS5, S4, S6); fits for Skoda (Octavia, Rapid, Yeti, Kodiaq, Fabio, Superb); fits for SEAT (Leon, Ateca, Ibiza, Altea, Cushion, Cord, Alhambra) Diagnostics
- [ABS Diagnosis] - Quickly identify and resolve ABS-related issues, including sensor faults (such as wheel speed sensors), wiring problems (faulty circuits or connectors within the ABS system), or ABS pump failures (malfunctions in the ECU controlling the ABS). Ensure proper system operation, restore optimal braking performance, and clear any warning lights.
- [SRS Diagnosis] - Quickly detect the airbag ECU itself, airbag sensor failure, airbag system plug disconnection or poor contact, seat belt sensor failure, or system error, etc, to ensure that the SRS (Supplemental Restraint system) is working properly. After repair, reset the system to clear the warning light and restore full safety performance. NOTE: It cannot reset Airbag crash or transmission codes.
- [Full OBD2 Function] - Read and clear trouble codes for all OBD2 systems, including show real-time data, freeze frame data, I/M Readiness, DTC lookup, test results for o-xygen sensor, On-board monitor test, request vehicle information, component test, modules present and e-vap test. Allowing you to quickly identify and troubleshoot vehicle issues.
- [AutoVIN Technology] - It simplifies diagnostics by automatically identifying the vehicle’s model and configuration, eliminating the need for manual input, and ensures accurate diagnostics by applying the correct data and algorithms, reducing errors caused by manual entry. Improves efficiency and streamlines the diagnostic process.
- [ABS Auto Bleeding] - Helps bleed your vehicle's Anti-lock Braking System (ABS), removing air from the brake lines to ensure optimal brake performance. It helps prevent brake issues such as spongy pedals, inconsistent braking, and reduced stopping power, and enhances vehicle safety by ensuring the ABS system is working properly, especially during critical driving situations. NOTE: It’s not compatible with vehicles that only support manual bleeding.
- Comprehensive OBD2 Scanner with 15 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 15 high demand reset functions, including Electronic Parking Brake Reset (EPB), SAS, BMS Reset, Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obdii scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly.
- 4 Main System Car Diagnostic Scanner & Full OBD2 Diagnostics: The XTOOL D5S vehicle code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS to read dtcs, and live data can be displayed in text or up to 4 pid data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This scan tool ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one
- One-Tap W!Fi Updates + No Software Fees: Enjoy a 5.45” high-resolution touchscreen (1440x720) that’s easy to read, even in low light. Free lifetime software updates over Wi-Fi keep your D5S OBD2 Scanner Diagnostic Tool updated with the latest features—no hidden fees. Ample 32GB storage plus expandable memory ensures room for all your diagnostic data, while durable silicone grips provide comfortable, secure handling. This makes D5S a cost-effective, long-term investment for continuous diagnostic support, a reli~able automotive scanner diagnostic tool for your family
- Wide Compatibility Across 90+ Vehicle Brands: The XTOOL D5S Scanner for cars and trucks works with OBDII-equipped vehicles built after 1996, covering over 90 vehicle brands, including 12V diesel and SUVs, minivans, and light-duty trucks. It supports most of protocols include CAN FD for broad compatibility. For vehicle-specific compatibility, send us your vehicle information to check the compatibility before purchase
- Super Clear Navigation Display: The XTOOL D5S car scanner enhances your diagnostic workflow with a super clear navigation display, designed for convenience and speed. TOP Capability include a Voltage Display for real-time monitoring of your vehicle’s electrical system, a “My Vehicle” Menu for adding and managing vehicle information, and Quick Button Interfaces for both Auto Scan and OBD2 Diagnostics, ensuring you can quickly access the menu you need. These features streamline the diagnostic process, allowing you to focus on what matters most—Efficient vehicle maintenance
- Pro-level ABS SRS OBD2 Scanner - Based on the NT301 FOXWELL Scanner, this car scanner takes OBD-II diagnostics to the next level by in-depth insights on reading ABS SRS Diagnostic Trouble Codes, display the Live Data: Wheel Speed Sensor, Airbag Issues, Wiring Faults, clear the ABS error codes after the car faults repaired, etc... NOTE: This code reader can only read SRS codes but CANNOT reset any Airbag crash codes. Please check the functions coverage BEFORE purchasing. NO Need to Register &Subscription.
- Full-Feature ABS Diagnostics - Real-time tracking of wheel speed sensor, brake force distribution, and brake pressure with dynamic graphs for easy analysis. Effortlessly read ABS trouble codes and access freeze frame data to identify and resolve system issues. This ABS scanner diagnostic tool also monitors ABS performance during emergency braking or on slippery surfaces, providing alerts for potential problems.
- Basic OBDII Scanner Functions - This obd2 scanner diagnostic tool also can Check Engine Fault Light, diagnose OBD-II modules instantly, display the Live Data with graph (engine RPM, coolant temperature, fuel trim, and sensor readings), locate bad sensors and indicate I/M readiness status before the annual inspection. Reducing the potential driving risk and keep a peak performance on the road.
- Top ABS Bleed Scan Tool - After replacing the ABS pump or adding brake fluid, air can enter the ABS module, causing the pedal to feel weak or slow to return. This OBD2 scanner with ABS auto bleed will restore your brake pedal’s firmness by efficiently removing air from the ABS module. For vehicle coverage, check the FOXWELL Diagnostic Coverage List under Support on the official site. NOTE: This feature is NOT compatible with vehicles that support manual bleed.
- User-Friendly & Budget-Friendly - Enjoy software updates without subscription for newer vehicle models(Any more issues about update, please let us know). This car code reader comes with a sturdy case for easy carrying. The code reader for cars will also save diagnostic data to avoid unnecessary diagnostic costs when you must to find the professional mechanic to fix the car faults instead of addressing them by yourself.
SEOCONTENT-START
23V-260
Model Year 2023
BMW X1 SAV
Second Row Outboard Seat Head Restraints
In-Car / In-App Communication – Safety Recall Reminder
20 Jul 2023
Title:
BMW Safety Recall 23V-260: Safety Belt Rear Seat (Left and Right)
Text:
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an interior trim panel during vehicle production. This could affect the function of the safety belt and, in rare cases, could increase the risk of injury. Contact an authorized BMW center immediately to get your vehicle repaired for FREE. Dealer locator: bmwusa.com/dealer. Advise all drivers of this important information. For the latest updates to this recall, please visit bmwusa.com/recall.
Short Text:
Important Safety Recall 23V-260: Safety Belt Rear Seat (Left and Right). Contact an authorized BMW center immediately to get your vehicle repaired for FREE. For updates to this recall, please visit bmwusa.com/recall. Dealer locator: bmwusa.com/dealer.
Pop-Up:
Important Safety Recall: Contact an authorized BMW center immediately to get your vehicle repaired for FREE. Dealer locator: bmwusa.com/dealer.
**************************************************************************************************************
7/19/23, 10:47 AM 72 02 23_RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 1/7
SIB 72 02 23
RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
2023-07-19
MODEL
E-Series Model Description Production Date
U11 X1 Sports Activity Vehicle August 2, 2022 – December 12,
2022
AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR,
AWP, Campaign Summary or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. You can see a list of affected
vehicles in Inventory Campaign Details (ICD) under ROSS.
SITUATION
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW X1 SAV
vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior trim panel during vehicle production. This could affect the function of the safety belt and, in rare
cases, could increase the risk of injury.
The Recall Notice and Q&A have been attached for further information.
The bulletin will be updated when additional information becomes available.
CAUSE
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior C-pillar trim panel, at the bottom, during vehicle production.
CORRECTION
Check the outer rear safety belts (left and right, per areas circled) and rework them if necessary.
Copyright ©2023 BMW of North America, Inc.
7/19/23, 10:47 AM 72 02 23_RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 2/7
PROCEDURE
1. Perform a visual check of the position of the outer safety belts in the rear seat.
The safety belt webbing is slightly clamped by
the C-pillar trim at the bottom. The latch is held
in a low position. NOT OK
Copyright ©2023 BMW of North America, Inc.
7/19/23, 10:47 AM 72 02 23_RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 3/7
The safety belt webbing is slightly clamped
by/pinched under the C-pillar trim at the bottom.
The latch is held in a low position. NOT OK
Safety belt installed correctly. OK
Copyright ©2023 BMW of North America, Inc.
7/19/23, 10:47 AM 72 02 23_RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 4/7
Safety belt installed correctly. OK
If the belts are not mounted correctly, grasp the
lower part of the belt webbing (red arrow) below
the latch and pull the belt firmly in the direction
of the green arrow (toward center of vehicle) to
release the pinched belt (the right rear
passenger seat is shown).
Copyright ©2023 BMW of North America, Inc.
7/19/23, 10:47 AM 72 02 23_RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 5/7
PARTS INFORMATION
No parts are required.
CLAIM INFORMATION
Reimbursement for this Recall will be via normal claim entry utilizing the applicable work package
information below.
Defect
Code:
0072490200 —
Completion before the first vehicle delivery to a customer or the vehicle is already in the workshop
Work Pkg Labor
Operation Description (Plus work) Labor
Allowance
# 1 00 74 531 Check rear safety belts (left and right),
rework if necessary 2 FRU
Or:
The vehicle arrives at your center and this Recall shows open (No other Main work will be performed
or claimed during this workshop visit)
Work Pkg Labor
Operation Description (Main work) Labor
Allowance
# 2 00 74 000 Check rear safety belts (left and right),
rework if necessary 3 FRU
Only one of the flat rate labor operation codes listed above can be used for claim submission and
reimbursement. Also, only one Main work flat rate labor operation code can be claimed per workshop visit.
Claim Repair Comments
Only reference the SIB number and the work package (Pkg) number performed in the RO technician notes
and the claim comments (For example: B72 02 23 WP 1), unless otherwise required by State law.
Reimbursement of Prior Customer-Pay Repairs (TREAD Act)
Based on the issue and the age of the Affected Vehicles being addressed by this Safety Recall Campaign, a
reimbursement request for a qualifying prior customer-pay repair is not likely.
However, if you do receive a reimbursement request from a customer for a prior repair that may qualify,
please contact the Warranty department (include a legible copy of the invoice) through IDS by selecting
Coverage, Policy, Coding Questions and Mileage Corrections. The Warranty department will review and
respond to your inquiry accordingly.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
Warranty Feedback
To submit feedback for the CLAIMS section of this bulletin: Submit an
IDS ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
Parts Feedback To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Supporting Materials
picture_as_pdf B720223_23V-260-U11-RrStSafetyBelt-FAQ-07Apr2023.pdf
Copyright ©2023 BMW of North America, Inc.
7/19/23, 10:47 AM 72 02 23_RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 6/7
picture_as_pdf B720223 Recall Notice.pdf
Copyright ©2023 BMW of North America, Inc.
7/19/23, 10:47 AM 72 02 23_RECALL 23V-260: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 7/7
Copyright ©2023 BMW of North America, Inc.
Attachment to B72 02 23 April 2023
SAFETY RECALL NOTICE
To: All Center Operators, Sales Managers, Service Managers, Parts Managers and Warranty
Processors
RE: Recall 23V-260: Seat Belt Rear Seat (Left and Right) – B72 02 23
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW
X1 SAV vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
Please be reminded that it is a violation of federal law (The Safety Act) for you to sell,
lease or deliver any new motor vehicle covered by this notification until the recall repair
has been performed. This means that Centers may not legally deliver new motor
vehicles to consumers until they are fixed or use/sell replacement equipment/parts
subject to this recall. Note also that substantial civil penalties apply to violations of the
Safety Act.
Also, you should not sell, lease or deliver any Certified Pre-Owned or used vehicles
subject to a safety recall until the repair is completed.
Please follow any special instructions that we provide to you for the return or disposition
of recall parts.
We appreciate all your assistance with this Recall.
Attachment to B72 02 23 April 2023
Safety Recall
23V-260
Rear Seat Safety Belt
Model Year 2023
BMW X1 SAV
Issue Date: 04/06/2023
Q1. Which BMW Group models in the US are potentially affected by this Safety Recall?
Certain Model Year 2023 BMW X1 SAV models in the US are potentially affected.
Q2. What is the specific issue?
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior trim panel during vehicle production. This could affect the function of the safety belt and, in rare
cases, could increase the risk of injury.
Q3. Why are other models / vehicles not included in this Safety Recall?
Other models have been produced according to specifications.
Q4. Can I continue to drive my vehicle?
Yes. However, when you are notified by BMW of this Safety Recall, please contact an authorized BMW
center to schedule an appointment as soon as possible. For the latest updates to this Safety Recall,
please visit bmwusa.com/recall. If you are not the only driver of this vehicle, please advise all other
drivers of this important information.
Q5. How did BMW Group become aware of the issue?
BMW Group became aware of the issue through its quality control procedures.
Q6. How will I be informed of this Safety Recall?
Owners of potentially affected vehicles will be notified via First Class mail and requested to schedule an
appointment with an authorized BMW center to have the remedy performed. Owners can locate their
nearest authorized BMW center at bmwusa.com/dealer.
To ensure BMW has the most up-to-date contact and vehicle information, owners should register their
vehicle at www.bmwusa.com/myBMW. Registration is free and will give them access to other
information specific for their BMW vehicle. Alternatively, owners can visit bmwusa.com/recall and click
on “Manage recall notices and contact information”.
Q7. How will my vehicle be remedied?
Potentially affected vehicles will have the rear seat safety belts on the left and right side inspected and,
if necessary, the vehicle trim panel will be adjusted to allow for proper operation of the safety belt. This
will be performed for free, which should take about an hour.
Q8. Do I have to wait for BMW to contact me to have the remedy performed?
No. Please contact an authorized BMW center to have this Safety Recall performed as soon as possible.
For the latest updates to this recall, please visit bmwusa.com/recall.
**************************************************************************************************************
From: Broadcast Messaging System
To: DL-BMS_Message_Monitors
Subject: BMW Recall 23V-xxx: Safety Belt Rear Seat (Left and Right)
Date: Friday, April 7, 2023 1:09:54 PM
Publish Date:
From:
Expiration Date:
April 6, 2023
Technical Service
April 20, 2023
DCSnet Message
Urgent
Subject: BMW Recall 23V-xxx: Safety Belt Rear Seat (Left and Right)
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW
X1 SAV vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
In the rear seating row, the safety belt on the left and/or right side may have been pinched against
an interior trim panel during vehicle production. This could affect the function of the safety belt and,
in rare cases, could increase the risk of injury.
A revised Bulletin has been posted in TIS with Repair and Warranty instructions. No parts are
required.
The Recall Notice and Q&A have been attached for further information.
Sincerely,
Technical Service
Attachments: B720223 Recall Notice[1680887111371].pdf
B720223_23V-xyz-U11-RrStSafetyBelt-FAQ-
07Apr2023[1680887111371].pdf
B720223_REV01[1680887111371].pdf
B720223 Recall
Notice[1680887111371].pdf
B720223_23V-xyz-U11-RrStSafetyBelt-FAQ-07Apr2023[1680887111371].pdf
B720223_REV01[1680887111371].pdf
Recipients: BMW Passenger Cars, All Offering, All Region, All Areas, All Departments, All Personnel
BMW SAV (Light Trucks), All Offering, All Region, All Areas, All Departments, All Personnel
BMW Passenger Cars, CC-All
BMW SAV (Light Trucks) CC-All
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 1/7
SIB 72 02 23
RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
2023-04-07
MODEL
E-Series Model Description Production Date
U11 X1 Sports Activity Vehicle August 2, 2022 – December 12,
2022
AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR,
AWP, Campaign Summary or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. You can see a list of affected
vehicles in Inventory Campaign Details (ICD) under ROSS.
SITUATION
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW X1 SAV
vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior trim panel during vehicle production. This could affect the function of the safety belt and, in rare
cases, could increase the risk of injury.
The Recall Notice and Q&A have been attached for further information.
The bulletin will be updated when additional information becomes available.
CAUSE
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior C-pillar trim panel, at the bottom, during vehicle production.
CORRECTION
Check the outer rear safety belts (left and right, per areas circled) and rework them if necessary.
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 2/7
PROCEDURE
1. Perform a visual check of the position of the outer safety belts in the rear seat .
The safety belt webbing is slightly clamped by
the C-pillar trim at the bottom. The latch is held
in a low position. NOT OK
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 3/7
The safety belt webbing is slightly clamped
by/pinched under the C-pillar trim at the bottom.
The latch is held in a low position. NOT OK
Safety belt installed correctly. OK
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 4/7
Safety belt installed correctly. OK
If the belts are not mounted correctly, grasp the
lower part of the belt webbing (red arrow) below
the latch and pull the belt firmly in the direction
of the green arrow (toward center of vehicle) to
release the pinched belt (the right rear
passenger seat is shown).
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 5/7
PARTS INFORMATION
No parts are required.
CLAIM INFORMATION
Reimbursement for this Recall will be via normal claim entry utilizing the applicable work package
information below.
Defect
Code:
0072490200 —
Completion before the first vehicle delivery to a customer or the vehicle is already in the workshop
Work Pkg Labor
Operation Description (Plus work) Labor
Allowance
# 1 00 74 531 Check rear safety belts (left and right),
rework if necessary 2 FRU
Or:
The vehicle arrives at your center and this Recall shows open (No other Main work will be performed
or claimed during this workshop visit)
Work Pkg Labor
Operation Description (Main work) Labor
Allowance
# 2 00 74 000 Check rear safety belts (left and right),
rework if necessary 3 FRU
Only one of the flat rate labor operation codes listed above can be used for claim submission and
reimbursement. Also, only one Main work flat rate labor operation code can be claimed per workshop visit.
Claim Repair Comments
Only reference the SIB number and the work package (Pkg) number performed in the RO technician notes
and the claim comments (For example: B72 02 23 WP 1), unless otherwise required by State law.
Reimbursement of Prior Customer-Pay Repairs (TREAD Act)
Based on the issue and the age of the Affected Vehicles being addressed by this Safety Recall Campaign, a
reimbursement request for a qualifying prior customer-pay repair is not likely.
However, if you do receive a reimbursement request from a customer for a prior repair that may qualify,
please contact the Warranty department (include a legible copy of the invoice) through IDS by selecting
Coverage, Policy, Coding Questions and Mileage Corrections. The Warranty department will review and
respond to your inquiry accordingly.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
Warranty Feedback
To submit feedback for the CLAIMS section of this bulletin: Submit an
IDS ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
Parts Feedback To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Supporting Materials
picture_as_pdf B720223_23V-xyz-U11-RrStSafetyBelt-FAQ-07Apr2023.pdf
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 6/7
picture_as_pdf B720223 Recall Notice.pdf
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 7/7
Copyright ©2023 BMW of North America, Inc.
Attachment to B72 02 23 April 2023
SAFETY RECALL NOTICE
To: All Center Operators, Sales Managers, Service Managers, Parts Managers and Warranty
Processors
RE: Recall 23V-xxx: Seat Belt Rear Seat (Left and Right) – B72 02 23
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW
X1 SAV vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
Please be reminded that it is a violation of federal law (The Safety Act) for you to sell,
lease or deliver any new motor vehicle covered by this notification until the recall repair
has been performed. This means that Centers may not legally deliver new motor
vehicles to consumers until they are fixed or use/sell replacement equipment/parts
subject to this recall. Note also that substantial civil penalties apply to violations of the
Safety Act.
Also, you should not sell, lease or deliver any Certified Pre-Owned or used vehicles
subject to a safety recall until the repair is completed.
Please follow any special instructions that we provide to you for the return or disposition
of recall parts.
We appreciate all your assistance with this Recall.
Attachment to B72 02 23 April 2023
Safety Recall
23V-xyz
Rear Seat Safety Belt
Model Year 2023
BMW X1 SAV
Issue Date: 04/07/2023
Q1. Which BMW Group models in the US are potentially affected by this Safety Recall?
Certain Model Year 2023 BMW X1 SAV models in the US are potentially affected.
Q2. What is the specific issue?
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior trim panel during vehicle production. This could affect the function of the safety belt and, in rare
cases, could increase the risk of injury.
Q3. Why are other models / vehicles not included in this Safety Recall?
Other models have been produced according to specifications.
Q4. Can I continue to drive my vehicle?
Yes. However, when you are notified by BMW of this Safety Recall, please contact an authorized BMW
center to schedule an appointment as soon as possible. For the latest updates to this Safety Recall,
please visit bmwusa.com/recall. If you are not the only driver of this vehicle, please advise all other
drivers of this important information.
Q5. How did BMW Group become aware of the issue?
BMW Group became aware of the issue through its quality control procedures.
Q6. How will I be informed of this Safety Recall?
Owners of potentially affected vehicles will be notified via First Class mail and requested to schedule an
appointment with an authorized BMW center to have the remedy performed. Owners can locate their
nearest authorized BMW center at bmwusa.com/dealer.
To ensure BMW has the most up-to-date contact and vehicle information, owners should register their
vehicle at www.bmwusa.com/myBMW. Registration is free and will give them access to other
information specific for their BMW vehicle. Alternatively, owners can visit bmwusa.com/recall and click
on “Manage recall notices and contact information”.
Q7. How will my vehicle be remedied?
Potentially affected vehicles will have the rear seat safety belts on the left and right side inspected and,
if necessary, the vehicle trim panel will be adjusted to allow for proper operation of the safety belt. This
will be performed for free, which should take about an hour.
Q8. Do I have to wait for BMW to contact me to have the remedy performed?
No. Please contact an authorized BMW center to have this Safety Recall performed as soon as possible.
For the latest updates to this recall, please visit bmwusa.com/recall.
**************************************************************************************************************
SAMPLE
BMW
Company
BMW
of North America, LLC
BMW Group Company
Mailing Address
PO Box 1227
Westwood NJ 07675-
1227
Telephone
(800) 525-7417
Fax
(201) 930-8362
E-mail
CustomerRelations@
bmwusa.com
Internet
bmwusa.com
IMPORTANT SAFETY RECALL
This notice applies to your vehicle,
Recall Campaign No. 23V-260: Second Row Outboard Seat Safety Belts
June 2023
Dear BMW Owner / Lessee:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
BMW AG has decided that a defect, which relates to motor vehicle safety, exists in certain Model
Year 2023 BMW X1 SAV models. Our records indicate that you are the owner of a potentially
affected vehicle.
Why are we contacting you?
We are pleased to inform you that we are ready to perform this safety recall. If you have not had
this recall performed, please contact your authorized BMW center immediately to
schedule an appointment. Please visit bmwusa.com/dealer to locate your nearest authorized
BMW center.
What could happen?
The second row outboard seat safety belts may have been pinched by an interior trimpanel. This
could affect the function of the safety belt and, in rare cases, could increase the risk of injury.
If you are not the only driver of this vehicle, please advise all other drivers and passengers
of this important information.
What will BMW do?
The second row outboard seat safety belts will be inspected and, if necessary, any interference
between the interior trim panels and the belts will be removed to allow for proper operation of the
safety belts, for free which could take about one hour.
There may be some options to help overcome the inconvenience of bringing your vehicle in for
service, if needed. Contact your local BMW center to check what may be available.
What if I am not the current owner of this vehicle?
If you changed your address or sold the vehicle, please let us know by visiting
bmwusa.com/mybmw or by contacting BMW Customer Relations (see left side of page for contact
info). If you are a vehicle lessor, Federal Regulations require you to forward this notice to
your lessee within ten days.
What if I have additional questions?
For the latest updates to this recall, please visit bmwusa.com/recall. Should you have any
questions about this recall, please contact your authorized BMW center. If you need additional
assistance, please contact BMW Customer Relations.
If your BMW center is unable to remedy the defect without charge or within a reasonable period
of time, you may notify the Administrator, National Highway Traffic Safety Administration, 1200
New Jersey Ave., S.E., Washington, DC 20590, call the toll-free Vehicle Safety Hotline at 1-888-
327-4236 (TTY: 1-800-424-9153), or go to http://www.safercar.gov.
Please be assured that your safety is important to us, and we sincerely apologize if this safety
recall causes any inconvenience. We recommend that you and your passengers wear your safety
belt at all times.
Sincerely,
BMW of North America, LLC
Remedy is
Available
Spanish translation on back side
Traducción en español en el lado inverso
SAMPLE
BMW
Empresa
BMW
of North America, LLC
BMW Group Company
Dirección postal
P.O. Box 1227
Westwood,
NJ 07675-1227
Teléfono
(800) 525-7417
Fax
(201) 930-8362
Correo electrónico
CustomerRelations@
bmwusa.com
Sitio web
bmwusa.com
IMPORTANTE RETIRADA POR MOTIVOS DE SEGURIDAD
Este aviso se aplica a su vehículo,
Campaña de retirada n.º 23V-260: Cinturones de seguridad de los asientos
laterales de la segunda fila de asientos
Junio de 2023
Estimado propietario o arrendatario de un vehículo BMW:
Le enviamos este aviso de conformidad con la Ley Nacional de Seguridad de Tránsito y Vehículos
(National Traffic and Motor Vehicle Safety Act). BMW AG ha determinado que algunos vehículos
de los modelos X1 SAV de BMW correspondientes al año 2023 tienen un defecto relacionado con
la seguridad de los vehículos motorizados. Según nuestros registros, usted es propietario de un
vehículo posiblemente afectado.
¿Por qué nos comunicamos con usted?
Nos complace informarle que estamos listos para hacer esta retirada por motivos de seguridad.
Si no se ha llevado a cabo la retirada, comuníquese de inmediato con el centro autorizado
de BMW para programar una cita. Visite bmwusa.com/dealer para buscar el centro autorizado
de BMW más cercano.
¿Qué podría suceder?
Es posible que los cinturones de seguridad de los asientos laterales de la segunda fila de asientos
hayan quedado comprimidos por un panel de guarnición interior. Esto podría afectar el
funcionamiento del cinturón de seguridad y, en raras ocasiones, aumentar el riesgo de lesiones.
Si usted no es la única persona que conduce este vehículo, comparta esta información
importante con los otros conductores y pasajeros.
¿Qué hará BMW?
Se inspeccionarán los cinturones de seguridad de los asientos laterales de la segunda fila de
asientos y, si es necesario, se retirará, sin cargo, cualquier interferencia que exista entre los
paneles de guarnición interiores y los cinturones de seguridad para permitir el correcto
funcionamiento de los cinturones de seguridad, lo que podría demorar aproximadamente una
hora.
Podría haber algunas opciones para ayudar a subsanar el inconveniente de traer su vehículo para
que se realice el servicio, de ser necesario. Comuníquese con su centro local de BMW para
consultar cuáles son las opciones disponibles.
¿Qué sucede si no soy el propietario actual de este vehículo?
Si usted cambió de dirección o vendió el vehículo, debe informarlo en bmwusa.com/mybmw o
comunicarse con el Servicio de Atención al Cliente de BMW (BMW Customer Relations) (consulte
la información de contacto en el lado izquierdo de la página). Si usted es arrendador del
vehículo, las reglamentaciones federales exigen que reenvíe este aviso a su arrendatario
en un plazo de diez días.
¿Qué debo hacer si tengo más preguntas?
Para conocer las últimas actualizaciones sobre esta retirada, visite bmwusa.com/recall. Si tiene
alguna pregunta sobre esta retirada, comuníquese con el centro autorizado de BMW. Si necesita
más ayuda, comuníquese con el Servicio de Atención al Cliente de BMW.
Si el centro de BMW no puede solucionar el defecto sin cargo o en un plazo razonable, usted
puede notificar al administrador de la Administración Nacional de Seguridad de Tránsito en
Carreteras (National Highway Traffic Safety Administration), en 1200 New Jersey Ave., S.E.,
Washington, DC 20590, llamar a la línea gratuita directa de seguridad vehicular (Vehicle Safety
Hotline) al 1-888-327-4236 (TTY: 1-800-424-9153) o visitar el sitio web http://www.safercar.gov.
Le aseguramos que nos importa su seguridad y le pedimos disculpas si esta retirada por motivos
de seguridad le causa algún inconveniente. Recomendamos que usted y sus pasajeros utilicen el
cinturón de seguridad en todo momento.
Atentamente.
BMW of North America, LLC
Hay una reparación
disponible
English translation on front side
Traducción en inglés en el frente
**************************************************************************************************************
From: Broadcast Messaging System
To: DL-BMS_Message_Monitors
Subject: BMW Recall 23V-xxx: Safety Belt Rear Seat (Left and Right)
Date: Friday, April 7, 2023 1:09:54 PM
Publish Date:
From:
Expiration Date:
April 6, 2023
Technical Service
April 20, 2023
DCSnet Message
Urgent
Subject: BMW Recall 23V-xxx: Safety Belt Rear Seat (Left and Right)
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW
X1 SAV vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
In the rear seating row, the safety belt on the left and/or right side may have been pinched against
an interior trim panel during vehicle production. This could affect the function of the safety belt and,
in rare cases, could increase the risk of injury.
A revised Bulletin has been posted in TIS with Repair and Warranty instructions. No parts are
required.
The Recall Notice and Q&A have been attached for further information.
Sincerely,
Technical Service
Attachments: B720223 Recall Notice[1680887111371].pdf
B720223_23V-xyz-U11-RrStSafetyBelt-FAQ-
07Apr2023[1680887111371].pdf
B720223_REV01[1680887111371].pdf
B720223 Recall
Notice[1680887111371].pdf
B720223_23V-xyz-U11-RrStSafetyBelt-FAQ-07Apr2023[1680887111371].pdf
B720223_REV01[1680887111371].pdf
Recipients: BMW Passenger Cars, All Offering, All Region, All Areas, All Departments, All Personnel
BMW SAV (Light Trucks), All Offering, All Region, All Areas, All Departments, All Personnel
BMW Passenger Cars, CC-All
BMW SAV (Light Trucks) CC-All
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 1/7
SIB 72 02 23
RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
2023-04-07
MODEL
E-Series Model Description Production Date
U11 X1 Sports Activity Vehicle August 2, 2022 – December 12,
2022
AFFECTED VEHICLES
Vehicles which require this campaign to be completed will show it as “Open” when checked either in AIR,
AWP, Campaign Summary or Warranty Vehicle Inquiry.
Please make sure you check your dealer inventory as soon as possible. You can see a list of affected
vehicles in Inventory Campaign Details (ICD) under ROSS.
SITUATION
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW X1 SAV
vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior trim panel during vehicle production. This could affect the function of the safety belt and, in rare
cases, could increase the risk of injury.
The Recall Notice and Q&A have been attached for further information.
The bulletin will be updated when additional information becomes available.
CAUSE
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior C-pillar trim panel, at the bottom, during vehicle production.
CORRECTION
Check the outer rear safety belts (left and right, per areas circled) and rework them if necessary.
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 2/7
PROCEDURE
1. Perform a visual check of the position of the outer safety belts in the rear seat .
The safety belt webbing is slightly clamped by
the C-pillar trim at the bottom. The latch is held
in a low position. NOT OK
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 3/7
The safety belt webbing is slightly clamped
by/pinched under the C-pillar trim at the bottom.
The latch is held in a low position. NOT OK
Safety belt installed correctly. OK
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 4/7
Safety belt installed correctly. OK
If the belts are not mounted correctly, grasp the
lower part of the belt webbing (red arrow) below
the latch and pull the belt firmly in the direction
of the green arrow (toward center of vehicle) to
release the pinched belt (the right rear
passenger seat is shown).
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 5/7
PARTS INFORMATION
No parts are required.
CLAIM INFORMATION
Reimbursement for this Recall will be via normal claim entry utilizing the applicable work package
information below.
Defect
Code:
0072490200 —
Completion before the first vehicle delivery to a customer or the vehicle is already in the workshop
Work Pkg Labor
Operation Description (Plus work) Labor
Allowance
# 1 00 74 531 Check rear safety belts (left and right),
rework if necessary 2 FRU
Or:
The vehicle arrives at your center and this Recall shows open (No other Main work will be performed
or claimed during this workshop visit)
Work Pkg Labor
Operation Description (Main work) Labor
Allowance
# 2 00 74 000 Check rear safety belts (left and right),
rework if necessary 3 FRU
Only one of the flat rate labor operation codes listed above can be used for claim submission and
reimbursement. Also, only one Main work flat rate labor operation code can be claimed per workshop visit.
Claim Repair Comments
Only reference the SIB number and the work package (Pkg) number performed in the RO technician notes
and the claim comments (For example: B72 02 23 WP 1), unless otherwise required by State law.
Reimbursement of Prior Customer-Pay Repairs (TREAD Act)
Based on the issue and the age of the Affected Vehicles being addressed by this Safety Recall Campaign, a
reimbursement request for a qualifying prior customer-pay repair is not likely.
However, if you do receive a reimbursement request from a customer for a prior repair that may qualify,
please contact the Warranty department (include a legible copy of the invoice) through IDS by selecting
Coverage, Policy, Coding Questions and Mileage Corrections. The Warranty department will review and
respond to your inquiry accordingly.
FEEDBACK REGARDING THIS BULLETIN
Technical Feedback To submit feedback for the technical topic of this bulletin: Submit your
feedback in the rating box at the top of this bulletin
Warranty Feedback
To submit feedback for the CLAIMS section of this bulletin: Submit an
IDS ticket to the Warranty Department, or use the chat available in the
Warranty Documentation Portal
Parts Feedback To submit feedback for the PARTS section of this bulletin: Submit an IDS
ticket to the Parts Department
Supporting Materials
picture_as_pdf B720223_23V-xyz-U11-RrStSafetyBelt-FAQ-07Apr2023.pdf
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 6/7
picture_as_pdf B720223 Recall Notice.pdf
Copyright ©2023 BMW of North America, Inc.
4/7/23, 2:50 PM 72 02 23_RECALL 23V-XXX: SAFETY BELT REAR SEAT (LEFT AND RIGHT)
about:blank 7/7
Copyright ©2023 BMW of North America, Inc.
Attachment to B72 02 23 April 2023
SAFETY RECALL NOTICE
To: All Center Operators, Sales Managers, Service Managers, Parts Managers and Warranty
Processors
RE: Recall 23V-xxx: Seat Belt Rear Seat (Left and Right) – B72 02 23
BMW AG has issued a Delivery Stop (effective March 31, 2023) on certain Model Year 2023 BMW
X1 SAV vehicles that were produced between August 2, 2022, and December 12, 2022.
As of April 7, 2023, this Delivery Stop has been upgraded to a Safety Recall.
Please be reminded that it is a violation of federal law (The Safety Act) for you to sell,
lease or deliver any new motor vehicle covered by this notification until the recall repair
has been performed. This means that Centers may not legally deliver new motor
vehicles to consumers until they are fixed or use/sell replacement equipment/parts
subject to this recall. Note also that substantial civil penalties apply to violations of the
Safety Act.
Also, you should not sell, lease or deliver any Certified Pre-Owned or used vehicles
subject to a safety recall until the repair is completed.
Please follow any special instructions that we provide to you for the return or disposition
of recall parts.
We appreciate all your assistance with this Recall.
Attachment to B72 02 23 April 2023
Safety Recall
23V-xyz
Rear Seat Safety Belt
Model Year 2023
BMW X1 SAV
Issue Date: 04/07/2023
Q1. Which BMW Group models in the US are potentially affected by this Safety Recall?
Certain Model Year 2023 BMW X1 SAV models in the US are potentially affected.
Q2. What is the specific issue?
In the rear seating row, the safety belt on the left and/or right side may have been pinched against an
interior trim panel during vehicle production. This could affect the function of the safety belt and, in rare
cases, could increase the risk of injury.
Q3. Why are other models / vehicles not included in this Safety Recall?
Other models have been produced according to specifications.
Q4. Can I continue to drive my vehicle?
Yes. However, when you are notified by BMW of this Safety Recall, please contact an authorized BMW
center to schedule an appointment as soon as possible. For the latest updates to this Safety Recall,
please visit bmwusa.com/recall. If you are not the only driver of this vehicle, please advise all other
drivers of this important information.
Q5. How did BMW Group become aware of the issue?
BMW Group became aware of the issue through its quality control procedures.
Q6. How will I be informed of this Safety Recall?
Owners of potentially affected vehicles will be notified via First Class mail and requested to schedule an
appointment with an authorized BMW center to have the remedy performed. Owners can locate their
nearest authorized BMW center at bmwusa.com/dealer.
To ensure BMW has the most up-to-date contact and vehicle information, owners should register their
vehicle at www.bmwusa.com/myBMW. Registration is free and will give them access to other
information specific for their BMW vehicle. Alternatively, owners can visit bmwusa.com/recall and click
on “Manage recall notices and contact information”.
Q7. How will my vehicle be remedied?
Potentially affected vehicles will have the rear seat safety belts on the left and right side inspected and,
if necessary, the vehicle trim panel will be adjusted to allow for proper operation of the safety belt. This
will be performed for free, which should take about an hour.
Q8. Do I have to wait for BMW to contact me to have the remedy performed?
No. Please contact an authorized BMW center to have this Safety Recall performed as soon as possible.
For the latest updates to this recall, please visit bmwusa.com/recall.
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-260
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
BMW of North America, LLC APR 12, 2023 NHTSA Recall No. : 23V-260 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : BMW of North America, LLC Address : P.O. Box 1227
Westwood NJ 07675-1227
Company phone : 18005257417
Population :
Number of potentially involved : 1,465 Estimated percentage with defect : 1 %
Vehicle Information : Vehicle 1 : 2023-2023 BMW X1 xDrive28i, X1 M35i Vehicle Type : LIGHT VEHICLES Body Style : SUV Power Train : GAS
Descriptive Information : Approximately 1,465 vehicles were assembled with safety belts for the second row outboard seats that may have been pinched by an interior trim panel.
Basis for recall population determination:
Vehicle manufacturing information was reviewed to determine the number and production date range of potentially affected vehicles. Recall component difference to non-recall component:
Potentially affected vehicles have been assembled with safety belts for the second row outboard seats that may have been pinched by an interior trim panel.
Production Dates : AUG 02, 2022 – DEC 12, 2022 VIN Range 1 : Begin : NR End : NR Not sequential
Description of Defect :
Description of the Defect : On the second row outboard seats, the safety belts may have been pinched by an interior trim panel during vehicle assembly.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : In rare cases, this could affect the function of the safety belt, which could
increase the risk of injury to vehicle occupants. Description of the Cause : NR Part 573 Safety Recall Report 23V-260 Page 2 Identification of Any Warning NR
that can Occur : Involved Components : Component Name 1 : Second Row Outboard Seat Safety Belt Component Description : Second Row Outboard Seat Safety Belt Component Part Number : 6959474, 7910831, 7910832 Supplier Identification : Component Manufacturer
Name : BMW AG Address : NR
NR
Country : NR Chronology :
On December 22, 2022, during vehicle assembly, an interference between a second row outboard seat safety belt and a vehicle interior trim panel was noticed. A closer examination indicated that a small portion of the belt was pinched by the trim panel in the lower area of the panel near the location of the seat bottom. Between January and February 2023, efforts were undertaken to understand why the issue may have occurred, and to investigate the possibility of a production process improvement. Various analyses were performed, including vehicle geometry, production system parameters, and production system image techniques. In March, additional efforts involved engineering analyses including technical assessments. It was suggested that even if the trim panel was interfering with a minor portion of the belt, this might have an affect upon restraint capability. Further reviews were conducted involving images captured during vehicle assembly, and other production and assembly quality information. Vehicle assembly information was reviewed to determine the number, and production dates, of potentially affected vehicles. On April 5, 2023, BMW decided to conduct a voluntary safety recall. BMW has not received any reports, nor is BMW otherwise aware, of any accidents or injuries related to this The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-260
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
issue.
Description of Remedy :
Description of Remedy Program : The safety belts for the second row outboard seats will be inspected and, if
necessary, the interior trim panel will be adjusted to remove any interference with the belt.
Owners will be notified by First Class mail advising them of the recall and to schedule an appointment with an authorized BMW dealer to have the remedy performed for free. If this condition were to occur to a potentially affected vehicle prior to this recall, the remedy would be covered by the BMW New Vehicle Limited Warranty program. Therefore, reimbursement for a pre-notification remedy re Part 573.13 and Part 577.11 is not necessary.
How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production :
Recall component: Second Row Outboard Seat Safety Belt – part number: 6959474, 7910831, 7910832
NR Recall Schedule :
Description of Recall Schedule : Dealer notification is expected to begin and end on April 12, 2023. Owner notification is expected to begin and end on June 2, 2023.
Planned Dealer Notification Date : APR 12, 2023 – APR 12, 2023
Planned Owner Notification Date : JUN 02, 2023 – JUN 02, 2023
* NR – Not Reported
SEOCONTENT-END
Last update on 2025-04-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.