| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V336
Manufacturer BMW of North America, LLC
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 33,214
Engine Belt Idler Pulley Bolt may Loosen/Break
If the idler pulley bolt breaks, the vehicle may unexpectedly lose power-assisted steering, increasing the risk of a crash.
Summary
BMW of North America, LLC (BMW) is recalling certain 2009-2013 X5 xDrive35d diesel vehicles. The engine idler pulley bolt may loosen over time and break.
Remedy
The remedy for this recall is still under development. The recall is expected to begin July 13, 2018. Owners may contact BMW customer service at 1-800-525-7417.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your BMW has a Recall
Manufacturer Notice
May 23, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V336-4847.pdf
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
June 11, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V336-8620.pdf
Loading...
SaleBestseller No. 1
Powerbuilt Serpentine Belt Tool Set, Remove and Install Car Vehicle Serpentine Belts, for Spring-Loaded, Accessories and Storage Case Included - 648629,Silver
- For removing and installing serpentine belts on vehicles with spring-loaded belt tensioners
- Includes accessories for specific vehicle applications, including GM, Ford, Chrysler, SAAB, VW and Volvo.
- INCLUDES: Complete accessory kit included for multi vehicle applications
- COMES IN: Heavy duty blow molded case to keep set protected and organized
- EASY TO READ: Includes detailed usage instruction with photos
Bestseller No. 2
CRAFTSMAN CMMT98279 CRFT SERPENTINE BELT TOOL KIT
- Designed to provide access and leverage to hard to reach pulleys
- COMFORT: Dipped handle for comfort and secure grip
- Durable contruction
Bestseller No. 3
BILITOOLS 15-Piece Universal Serpentine Belt Tool Set, Ratcheting Serpentine Belt Tensioner Tool Kit
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring-loaded belt tensioner pulley. Come with red storage case.
- Combines the advantages of a ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination.
- Comes with extension for hard-to-reach belt tensioners. Eight low profile sockets and extension help to fit into tight spots.
- Includes Drive Tools: 14" extension arm, ratcheting wrench with 19 mm and 22 mm female ratchet drive, and 3/8", 1/2" and 3/4" square adapters
- Includes Sockets: 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 18 mm and 19 mm. Includes Crowfoot Wrenches: 13 mm, 14 mm and 15 mm.
SaleBestseller No. 4
Powerbuilt Serpentine Belt Tool Kit - 648451, Black
- For removing or installing serpentine belts on vehicles with spring-loaded automatic belt tensioners
- Tool includes 24-in handle with 3/8-in square drive and 9-1/4-in adapter/extension with 1/2-in square drive
- Adapter fits on handle in 8 different positions
- For removing or installing serpentine belts on vehicles with spring-loaded automatic belt tensioners
- Includes 24 inch handle with 3/8 inch square drive
SaleBestseller No. 5
JEGS W84010 Serpentine Belt Tool Fits: (idler pulleys requiring)
- Product type: SPORTING_GOODS
- Country of origin: China
- Releases tension on serpentine belts with spring loaded idler pulleys
- HANDLE: Cushioned red handle makes use of this tool simple and easy
Bestseller No. 6
GEARWRENCH 15 Piece Ratcheting Serpentine Belt Tool Set - 3680D
- Combining the innovation of a GEARWRENCH ratcheting wrench with the requirements of the serpentine belt removal tool to provide the best possible combination
- Complete tool set for removing or installing the serpentine belt on vehicles with a spring loaded belt tensioner pulley
- Long bar can hold sockets directly or attach to the ratcheting wrench for maximum access
- Includes Drive Tools: Long Bar, Special GearWrench Ratcheting Wrench, and 3/8inch, 1/2inch and 3/4inch Adapters
- Includes 6 Point Sockets: 13 millimeter, 14 millimeter, 15 millimeter, 16 millimeter, 17 millimeter, 18 millimeter and 19 millimeter
SaleBestseller No. 7
CTA Tools 2670 Toyota Timing Belt Tensioner Compressor
- Includes One Toyota Timing Belt Tensioner Compressor
- Engineered for 1990 and Up T100, Tacoma and 4-Runner Trucks
- Design Features a Internal Nut to Expand Tool
- Features a Locking Pin for Hydraulic Piston Push Rod
- Expertly Designed And Crafted To The Exacting Standards Expected From CTA Tools
Bestseller No. 8
Bestseller No. 9
Serpentine Belt Removal Tensioner Tool Compatible for Mini Cooper S R52 R53 BMW W11 Supercharged Engine Replaces 118410 and 118470
- 【 Fits】: Specialty tool for checking the serpentine belt Compatible for BMW MINI engines. Exclusively designed for MINI Cooper W11 engines. Replaces OEM number 118410 and 118470 .
- 【 Material 】: Made of steel construction , with red soft plastic coated non-slip grip handle. easy grip and no harm to your hand !
- 【 Features】: The serpentine belt removal tool is for easily replacing the belt.Rotates the belt tensioner to remove the belt from the pulley. Goes into narrow space for changing serpentine belt. Replacing the serpentine belt requires dedicated tool because of the limited access in a narrow engine compartment.
- 【 Package included】: 1x removal tool and 1x tensioner locking pin. Comes with a tensioner locking pin to help line up with the holes on the tensioner to ensure easier removal and installation.
- 【 100% Satisfaction service 】: If you're not 100% satisfied with our PRODUCTS, simply return it for a full refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase.Thank you.
SaleBestseller No. 10
Performance Tool W80497 Toyota Belt Tensioner Socket
- Fits the special bolt that secures the pulley to the belt tensioner on most 1ZZ and all 2ZZ Toyota engines
- Use this socket if the head of the bolt on the pulley is exposed, and not covered with a plastic cap
- If your 1ZZ pulley has a black plastic cap covering the head of the bolt, then it is a Star bolt
- Needed when replacing the pulley only on stock OEM tensioners, not the full assembly
- Use with 1/2 in. square or 7/8 in. combination wrench, or socket
Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
