Recall 19V-599 Replace the Electric Motor Electronics (EME) – 2019 BMW i3 & i8

“This site contains affiliate links for which OEMDTC may be compensated”

August 14, 2019 NHTSA CAMPAIGN NUMBER: 19V599000

High-Voltage Electrical Power May Shut Down

A shut down of high-voltage electrical power would result in a loss of propulsion, increasing the risk of a crash.

 

NHTSA Campaign Number: 19V599

Manufacturer BMW of North America, LLC

Components ELECTRICAL SYSTEM, HYBRID PROPULSION SYSTEM

Potential Number of Units Affected 139

 

Summary

BMW of North America, LLC (BMW) is recalling certain 2019 i3 BEV, i3 REx, and i8 vehicles. A circuit board problem within the Electric Motor Electronics (EME) module may shutdown the supply of high-voltage electrical power.

 

Remedy

BMW will notify owners, and dealers will replace the EME module, free of charge. The recall began October 11, 2019. Owners may contact BMW customer service at 1-800-525-7417.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your BMW has a Recall

 


SIB 12 27 19

2020-01-13

RECALL CAMPAIGN 19V-599 REPLACE THE ELECTRIC MOTOR ELECTRONICS (EME)

Please perform the procedure outlined in this Service Information on all affected vehicles before customer delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure the next time the vehicle is in the shop.

This Service Information Bulletin (Revision 2) replaces SI B12 27 19 dated October 2019.

What’s New (Specific text highlighted):

  • Added emissions certificate instructions
  • Warranty Information section updated

 

MODEL

Engineering Designation Model Description Production Date
I01 i3 December 19, 2018 thru March 29, 2019
I12 i8 Coupe February 7 thru March 6, 2019

 

AFFECTED VEHICLES

Vehicles which require this Recall Campaign to be completed will show it as “Open” when checked either in AIR, the “Service Menu” of DCSnet (Dealer Communication System), ISPA Next or Warranty Vehicle Inquiry.

 

SITUATION

BMW of North America, LLC is conducting a Voluntary Safety Recall (effective August 8, 2019) on a small number of Model Year 2019 BMW vehicles that were produced between December 19, 2018 and March 29, 2019.

The Electrical Machine Electronics (EME) Printed Circuit Board (PCB) may not have been produced to specifications.

Approximately 139 vehicles are affected by this recall.

In the event of failure of the electrical machine electronics (EME); the system will shut down high-voltage electrical power. A shut down of high-voltage electrical system would result in a loss of propulsion, increasing the risk of a crash. However, the 12-volt electrical power remains functional to support power steering and braking.

A red check control message (CCM) is displayed to alert the driver of the shutdown of high-voltage components.

 

Note:

The electric drive function may be restored by switching the drive-readiness state off and on again.

Recall notice and Q&A have been attached for further information.

 

CORRECTION

Replace the Electrical Machine Electronics (EME).

 

PROCEDURE

Replace the electrical machine electronics as per REP 12 36 610 – “Replacing electrical machine electronics (EME)”.

 

Note:

Version 3 of the repair instructions should be used in ISTA / AIR.

Important warning for working on the high-voltage systems on the I01 (i3 BEV and REx), and

I12:

Only properly trained personnel, who have passed all applicable technical training courses, should perform any maintenance or repairs on any Hybrid or Electric Vehicle. Work performed by unqualified persons may result in severe injury or damage to the vehicle. Additional information is found in Repair Instruction 61 00… Observe safety instructions when handling electric vehicles.

 

PARTS INFORMATION

Performing a part number look-up in ETK or AIR by VIN or model in place of using/invoicing the following part numbers may result with the wrong parts being invoiced and installed.

Note:

The applicable Electrical Machine Electronics (EME) is to be determined and selected from the Electronic Parts Catalogue based on the specific type of vehicle being repaired.

I01 (i3): 

Part Number Description Quantity
I01
12 36 9 454 916 Electrical motor electronics 1
Or:
12 36 9 454 917 Electrical motor electronics 1
Or:
12 36 9 454 922 Electrical motor electronics 1
And, for all I01:
61 27 7 629 345 Torx socket screw 10
12 37 8 605 128 Hexagon screw 6
24 14 7 605 027 Spring nut 8
22 11 6 879 664 External Torx 2
07 11 9 905 433 Hexagon screw with washer 3
33 30 6 854 285 Torx bolt 4
18 30 8 614 953 Clamping collar 1
33 30 6 859 119 Hexagon screw 2
12 36 7 616 288 Decoupling element 3
12 37 7 626 090 Cover 1
31 50 8 743 675 Shaft seal with locking ring 2
33 40 6 858 534 Collar bolt with compression spring 2
17 73 8 605 844 Sound Insulation 1

 

 

I12 (i8 Coupe): 

Part Number Description Quantity
I12
12 36 9 896 043 Electrical motor electronics 1
And:
61 27 7 629 345 Torx screw inner 10
12 37 7 626 090 Cover 1
24 14 7 605 027 Spring nut 3
27 20 8 647 486 Set, gaskets (E-Gearbox) 1
27 20 8 647 465 Set, radial shaft seals 1
07 12 9 908 662 ASA- bolt 6
07 12 9 908 661 ASA- bolt 1
07 11 9 908 003 Hex bolt 2
07 14 9 382 927 Hex bolt 1
33 40 6 858 534 Collar bolt with compression spring 2
07 12 9 907 534 ASA- bolt 2
31 60 6 779 989 Lock ring 1
33 32 6 760 668 Self-locking collar nut 4
07 12 9 907 861 Hex screw with collar 2
31 10 6 859 543 Gasket bulkhead 2
33 30 6 874 176 ASA-Screw with washer 6
31 10 6 862 760 Hex bolt with washer 6
33 17 6 760 342 Nut 2
33 30 6 760 349 Self-locking collar nut 2
31 10 6 769 441 Hex bolt with washer 2
33 30 6 787 062 Combination nut 2
33 32 6 768 884 Hexagon nut with collar 2
32 30 6 778 609 Torx screw 1
07 11 9 907 137 Hexagonal screw 8
07 11 9 905 392 Hex bolt with washer 4

 

 

Bulk Materials 

Part Number Description Quantity
82 14 1 467 704 BMW Antifreeze (1 gallon concentrate) Sublet as needed
83 23 2 357 146 Assembly grease (5g) (I12 – i8 Coupe only) Sublet as needed

 

Note: Other small parts such as screws, nuts and seals, which must be replaced according to the ISTA repair instructions, must be selected from the Electronic Parts Catalogue according to the respective vehicle type and invoiced under the special defect code.

For California centers only: This Safety Recall involves an emissions compliant component. It is required by the California Code of Regulations that an executed orange “Vehicle Emission Recall – Proof of Correction” certificate (SD92-084, see illustration) be provided to each customer (for vehicles registered in the state of California), once this Recall on his or her vehicle has been completed.

 

WARRANTY INFORMATION

During this workshop visit, the affected vehicle may show one or more other Technical Campaign repairs open that also include vehicle programming and encoding, the programming and encoding procedure may only be invoiced one time.

If you have this situation, update the vehicle to the current available I-level by performing and submitting for one of these open Technical Campaigns. Please be sure to also perform any other additional work as required by the campaign and/or close the remaining open vehicle programming and encoding Technical Campaign repairs as outlined in the corresponding Service Information Bulletin.

Reimbursement for this Recall will be via normal claim entry utilizing the following information:

Defect Code: 0012110500 I01 I12 Replace electrical machine electronics EME

 

Completion before the first vehicle delivery to a customer or the vehicle is already in the workshop-

Work Pkg Labor Operation Description (Plus work) Labor Allowance
# 1 00 68 611 Replacing the electrical machine electronics (EME), programming and encoding vehicle control units (includes connecting an approved battery charger/power supply and performing a vehicle test), checking wheel alignment (KDS without loading) and adjusting as necessary. Refer to AIR
# 2 00 68 612 Replacing the electrical machine electronics (EME), (programming and encoding vehicle control units was performed in conjunction with another campaign or repair during the same workshop visit), checking wheel alignment (KDS without loading) and adjusting as necessary Refer to AIR

 

Or:

The vehicle arrives at your center and this Recall Campaign shows open (No other Main work will be performed/claimed during this workshop visit)-

Work Pkg Labor Operation Description (Main work) Labor Allowance
# 3 00 68 084 Replacing the electrical machine electronics (EME), programming and encoding vehicle control units (includes connecting an approved battery charger/power supply and performing a vehicle test), checking wheel alignment (KDS without loading) and adjusting as necessary. Refer to AIR

 

And, as needed:

Sublet – Bulk Materials

Sublet Code 4 Up to $40.00 Reimbursement for the repair-related bulk material (Do not use the BMW part number for claim submission)

 

Sublet reimbursement calculation for claiming the applicable repair-related bulk material (BMW part numbers) is at the dealer net price amount for the quantity used plus your center’s handling.

BMW Antifreeze/Coolant: Claim the corresponding dollar amount for the quantity needed to replace what was drained with a 50/50 coolant/water solution.

Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.

 

Claim Repair Comments

Only reference the SIB number and the work package (Pkg) number performed in the RO technician notes and in the claim comments (For example: B12 27 19 WP 1), unless otherwise required by State law.

 

Programming and Encoding – Vehicle Control Units (RO and Claim Comments Required)

The programming procedure automatically reprograms and encodes all vehicle control modules which do not have the latest software I-level. If one or more control module failures occur during this programming procedure:

Please claim this consequential control module-related repair work under the defect code listed in this bulletin with the applicable AIR labor operations.

Please explain this additional work (The why and what) on the repair order and in the claim comments section.

For control module failures that occurred prior to performing this programming procedure:

When covered under an applicable limited warranty, claim this control module-related repair work using the applicable defect code and labor operations (including diagnosis) in AIR.

And, as applicable:

 

Alternative Mobility Solution (AMS) for Vehicle Owners (RO and Claim Comments Required)-

This Recall repair qualifies for Alternative Mobility Solution (AMS) expense reimbursement, claim this item under the Defect Code noted above as follows:

  • Sublet Code 2 – Itemize the AMS sublet amount on the repair order and in the claim comment section.

Please refer to SI B01 29 16 for additional information
Supporting Materials
picture_as_pdf B122719_Attachment (EME-QA).pdf
picture_as_pdf B122719_Attachment (Recall Notice).pdf


SAFETY RECALL NOTICE

To:  All Center Operators, Sales Managers, Service Manager, Parts Manager and Warranty Processor

RE: Recall 19V-xxx: Replace the Electric Motor Electronics (EME) – B12 27 19

BMW of North America, LLC is conducting a Voluntary Safety Recall (effective August 8, 2019) on a small number of Model Year 2019 BMW vehicles that were produced between December 19, 2018 and March 29, 2019. 

Please be reminded that it is a violation of federal law (The Safety Act) for you to sell, lease or deliver any new motor vehicle covered by this notification until the recall repair has been performed.  This means that centers may not legally deliver new motor vehicles to consumers until they are fixed or use/sell replacement equipment/parts subject to this recall.  Note also that substantial civil penalties apply to violations of the Safety Act. 

Also, you should not sell, lease or deliver any Certified Pre-Owned or used vehicles subject to a safety recall until the repair is completed. 

Please follow any special instructions that we provide to you for the return or disposition of recall parts.

  

We appreciate all your assistance with this Recall.


Electric Motor Electronics (EME)
Safety Recall 19V-xxx
Model Year 2019
BMW i3 / i8
Last Updated 08/08/2019

 

Q1. Which BMW Group models in the US are potentially affected by this Safety Recall?

Approximately 139 Model Year 2019 BMW i3 and i8 vehicles, produced between December 19, 2018 and March 29, 2019, are potentially affected.

 

Q2. What is the specific issue?

The Electric Motor Electronics (EME) may not have been produced to supplier specifications.

 

Q3. What can happen as a result of this issue?

The EME could shut down electrical power, lead to a loss of propulsion, and increase the risk of a crash.

 

Q4. Why are other BMW Group vehicles not included in this Safety Recall?

The EME on other BMW i3 and i8 vehicles was produced to supplier specifications.

 

Q5. How did BMW Group become aware of this issue?

BMW Group became aware of this issue through its quality control procedures.

 

Q6. Can I determine if this issue exists in my vehicle? 

If your vehicle loses electrical power, it may be experiencing this issue.

 

Q7. What should I do if I notice this condition in my vehicle?

If this condition occurs, carefully move away from traffic and pull over to a safe location as soon as possible.  All occupants should carefully exit the vehicle and move to a safe location away from traffic.  Do not continue to drive the vehicle.  Contact BMW Roadside Assistance at 1-800-332-4269 immediately to have your vehicle brought to the nearest authorized BMW center.

If you are not the only driver of this vehicle, please advise all other drivers and passengers of this important information.

 

Q8. Can I continue to drive my vehicle (before I receive my letter)?

Yes.  However, when you receive a letter requesting you to make an appointment to have this Safety Recall performed by an authorized BMW center, please do so as soon as possible.

 

Q9. How will my vehicle be repaired?

The EME will be replaced.  This will be performed for free and may take several hours.

 

Q10. Is BMW Group aware of any accidents or injuries in the US, involving these BMW Group vehicles associated with this Safety Recall?

No.

 

Q11. How will I be informed of this Safety Recall?

You will receive a letter in October via First Class mail advising you of this Safety Recall and requesting you to schedule an appointment with an authorized BMW center to have this Safety Recall performed.  You can locate your nearest authorized BMW center at www.bmwusa.com/dealer.

To ensure the BMW Group has your most recent contact and vehicle information, please register your BMW vehicle at www.bmwusa.com/myBMW.  Registration is free, and will give you access to factory initiated campaigns and other information specific to your vehicle.

 

Q12. Do I have to wait for my letter to have my vehicle serviced?

Yes.  We are in the process of implementing this Safety Recall to ensure that the necessary tools, parts, and procedures are available prior to contacting you to schedule an appointment with your authorized BMW center to have this Safety Recall performed.  For the latest updates to this Safety Recall, please visit www.bmwusa.com/recall.

 


BMW

IMPORTANT SAFETY RECALLRemedy Available

This notice applies to your vehicle,

Recall Campaign No. 19V-599:  Electric Motor Electronics (EME)

October 2019

Dear BMW Owner / Lessee:

This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.  BMW AG has decided that a defect, which relates to motor vehicle safety, exists in certain Model Year 2019 BMW i3 BEV, I3 Rex, and i8 vehicles.  Our records indicate that you are the owner of a potentially affected vehicle.

 

Why are we contacting you?

We are pleased to inform you that we are ready to perform this recall.  If you have not had this recall performed, please contact your authorized BMW center immediately to schedule an appointment.

Visit www.bmwusa.com/dealer to locate your nearest BMW center.

 

What could happen?

The Electric Motor Electronics (EME) may not have been produced to supplier specifications and could shut down high-voltage electrical power.  If this occurs, it would lead to a loss of propulsion and increase the risk of a crash. However, 12-volt electrical power remains functional to support power steering and braking.

If your vehicle loses high-voltage electrical power, it may be experiencing this issue. If this occurs, carefully move away from traffic and pull over to a safe location as soon as possible.  All occupants should carefully exit the vehicle and move to a safe location away from traffic.  Do not continue to drive the vehicle. Contact BMW Roadside Assistance at 1-800-332-4269 immediately to have your vehicle brought to the nearest authorized BMW center.

If you are not the only driver of this vehicle, please advise all other drivers and passengers of this important information.

 

What will BMW do?

The EME will be replaced for free which could take approximately one hour.

 

What if I am not the current owner of this vehicle?

You can update the vehicle ownership or your contact information by completing the enclosed postagepaid card or by registering at https://www.bmwusa.com/myBMW. If you are a vehicle lessor, Federal Regulations require you to forward this notice to your lessee within ten days.

 

What if I have questions or experience problems?

For the latest updates to this recall, please visit www.bmwusa.com/recall.  Should you have any questions about this recall, please contact your authorized BMW center.  If you need additional assistance, contact BMW Customer Relations and Services at 1-800-525-7417 or at CustomerRelations@bmwusa.com.

If your BMW center is unable to remedy the defect without charge or within a reasonable period of time, you may notify the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E.,

Washington, DC 20590, call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-4249153), or go to https://www.safercar.gov.

BMW of North America, LLCPlease be assured that your safety is important to us, and we sincerely apologize if this recall causes any inconvenience.  We recommend that you and your passengers wear your safety belt at all times.

Sincerely,

Spanish translation on back side Traducción en español en el lado inverso

For vehicles registered in the state of California:  The California Department of Motor Vehicles, in conjunction with the Air Resources Board, has implemented the Registration Renewal/Recall Tie-In Program which requires the completion of the recall.  Upon completion, you will receive a Proof of Correction Certificate.  Please save the certificate since the California Department of Motor Vehicles may require it as proof of Emissions Recall Campaign completion.


BMW

IMPORTANTE RETIRADA POR MOTIVOS DE SEGURIDADRepuesto disponible

Este aviso se aplica a su vehículo,                                            

Campaña de retirada n.º 19V-599: sistema electrónico del motor eléctrico (EME)

Octubre de 2019

Estimado propietario o arrendatario de un vehículo BMW:

Le enviamos este aviso en virtud de la National Traffic and Motor Vehicle Safety Act (Ley Nacional de Seguridad de Tránsito y Vehículos). BMW AG ha determinado que algunos vehículos de los modelos i3 BEV, I3 Rex e i8 de BMW, del año 2019, tienen un defecto relacionado con la seguridad de los vehículos motorizados. Según nuestros registros, usted es propietario de un vehículo potencialmente afectado.

 

¿Por qué nos ponemos en contacto con usted?

Nos complace informarle que estamos listos para realizar la retirada. Si no se ha hecho la retirada, comuníquese de inmediato con el centro autorizado de BMW para programar una cita. Visite www.bmwusa.com/dealer para localizar el centro de BMW más cercano.

 

¿Qué podría suceder?

Es posible que el sistema electrónico del motor eléctrico (Electric Motor Electronics, EME) no se haya fabricado según las especificaciones del distribuidor y podría cortar la energía eléctrica de alto voltaje. Si esto ocurre, causaría una pérdida de propulsión y aumentaría el riesgo de accidente. Sin embargo, la energía eléctrica de 12 voltios seguiría funcionando para usar la dirección asistida y para frenar.

Si su vehículo pierde energía eléctrica de alto voltaje, es posible que tenga ese problema. Si esto ocurre, aléjese con cuidado del tránsito y deténgase en un lugar seguro lo antes posible. Todos los ocupantes deben salir del vehículo con cuidado y trasladarse a un lugar seguro lejos del tránsito. No siga conduciendo el vehículo. Comuníquese de inmediato con BMW Roadside Assistance (Asistencia en la carretera de BMW) llamando al 1-800-332-4269 para que le lleven el vehículo al centro autorizado de BMW más cercano.

Si usted no es la única persona que conduce ese vehículo, comparta esta importante información con todos los demás conductores y pasajeros.

 

¿Qué hará BMW?

Se reemplazará el EME sin cargo, lo que podría llevar aproximadamente una hora.

¿Qué ocurre si no soy el propietario actual de este vehículo?

Puede actualizar la información de la titularidad del vehículo o su información de contacto completando la tarjeta con respuesta postal paga adjunta o registrándose en https://www.bmwusa.com/myBMW. Si usted es arrendador del vehículo, las reglamentaciones federales exigen que reenvíe este aviso a su arrendatario en un plazo de diez días.

 

¿Qué debo hacer si tengo alguna pregunta o algún problema?

Para ver las últimas actualizaciones de esta retirada, visite www.bmwusa.com/recall. Si tiene alguna pregunta sobre esta retirada, comuníquese con el centro autorizado de BMW. Si necesita asistencia adicional, comuníquese con el BMW Customer Relations and Services (Servicio de Atención al Cliente de BMW) llamando al 1-800-525-7417 o por correo electrónico a CustomerRelations@bmwusa.com.

Si el centro de BMW no puede resolver el defecto sin cargo o en un plazo razonable, puede notificar al administrador de la National Highway Traffic Safety Administration (Administración Nacional de Seguridad de Tránsito en Carreteras), 1200 New Jersey Ave., S.E., Washington, DC 20590, llamar a la Vehicle Safety Hotline (Línea gratuita directa de seguridad vehicular) al 1-888-327-4236 (TTY: 1-800-424-9153) o visitar https://www.safercar.gov.

Le garantizamos que nos importa su seguridad y le pedimos sinceras disculpas si esta retirada le causa algún inconveniente. Recomendamos que usted y sus pasajeros utilicen el cinturón de seguridad en todo momento.

 

Atentamente.

BMW of North America, LLC

English version on front side Versión en inglés en el frente

 

Para vehículos registrados en el estado de California: El Departamento de Vehículos Motorizados de California (California Department of Motor Vehicles), en colaboración con la Junta de Recursos del Aire (Air Resources Board), ha implementado el Registration Renewal/Recall Tie-In Program (Programa de renovación de registros/acuerdo de retirada) que requiere la finalización de la retirada. Después de la finalización, recibirá una constancia del certificado de corrección. Guarde el certificado, ya que el Departamento de Vehículos Motorizados de California puede requerirlo como constancia de la finalización de la Emissions Recall Campaign (Campaña de retirada de emisiones).

 


2 Affected Products

Vehicles

MAKE MODEL YEAR
BMW I3 2019
BMW I8 2019

 


7 Associated Documents

Recall Quarterly Report #2, 2020-1

RCLQRT-19V599-6033.PDF 211.237KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Defect Notice 573 Report

RCLRPT-19V599-1806.PDF 215.712KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.66 KB]

 


Manufacturer Notices(to Dealers, etc.) – Safety Recall Notice and FAQ’s on 2019 i3 and i8 Coupes produced between 12/19/18 and 3/29/2019. The Electric Motor Electronics (EME) may not have been produced to supplier specifications.

RCMN-19V599-2502.pdf 272.243KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [265.86 KB]

 


Recall Acknowledgement

RCAK-19V599-2104.pdf 244.758KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.02 KB]

 


Recall Quarterly Report #1, 2019-4

RCLQRT-19V599-0511.PDF 211.136KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-19V599-4791.pdf 1654.573KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.58 MB]

 


Remedy Instructions and TSB

RCRIT-19V599-9131.pdf 270.569KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [264.23 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V599&docType=RCL

 


 

Bestseller No. 1
ChargePoint Home Flex Level 2 EV Charger, NEMA 14-50 Outlet 240V EV Charge Station, Electric Vehicle Charging Equipment Compatible with All EV Models
  • Charge with confidence: ChargePoint builds reliable, flexible and innovative EV charging stations for home, business and fleets. Drivers have access to 24/7 support and hundreds of thousands of places to charge across North America via the ChargePoint app.
  • Charge Smart: With the in-depth, user-friendly ChargePoint Mobile App, you can control your electric car charger, easily manage and set reminders, connect to your smart home devices, find stations, get valuable data and charging information, and get access to the app's latest features.
  • Vast Network: ChargePoint’s extensive network includes 274k+ ChargePoint stations across North America and Europe, so you have peace of mind wherever life takes you. You can even charge up at plus 565k+ ChargePoint roaming partner stations for added flexibility and convenience when you’re on the go.
  • Safe & Durable: Rely on this EV charger to provide safe charging at home, adhering to UL safety standards; The charger can be installed indoor or outdoor with a weatherproof NEMA outlet and includes a cable that stays pliable in very cold weather.
  • Fast & Powerful: This charger charges up to 7 times faster than a 110V outlet, delivering an impressive 30 miles of range per hour. The plug is compatible with all EVs (Tesla requires adapter) and works with a 14-50 outlet. Requires 40A or 50A-rated circuit.
Bestseller No. 2
EVDANCE Level 1 LEVEL2 EV Charger 16A Amp 110V-240V 25ft Portable Electric Vehicle Charging Station with NEMA 6-20 Plug, 5-15 Adapter for J1772 Electric Cars
  • Fast charging Speed: Experience quick and efficient EV charging with the Stylish 16A Level 2 portable EV charger, Charge your car 4x faster than traditional 8A Level 1 chargers, providing a rapid charging solution for your electric vehicle
  • Universal Compatibility: Suitable for all EV cars and plug-in hybrids, it's compact, durable, and perfect for home use. Enjoy the convenience of a 23ft cable, ideal for most driveways or garages, The EV charger is perfect for multi-vehicle owners or buildings with EV charging docks. Enjoy the flexibility of charging different electric vehicles with one reliable charger.
  • Excellent Protection:With an intelligent chip, the Level 2 EV charger offers comprehensive protection including lightning, leakage, grounding, over voltage, under voltage, over charge, over current, and overheat protection. CE certification, IP66 control box and EV connector ensure safe and secure charging.
  • Portable & Convenient:Effortlessly carry and store the EV charger with the included portable bag. Simply plug into a NEMA 6-20 outlet, the NEMA 5-15 Outlet is included , and the compact size, along with the 23 ft extra-long charging cable, ensures compatibility with most driveways or garages
  • EVDANCE 12 Months Warranty: EVDANCE covers a period of 12 months from the date of purchase. During this time, if you encounter any issues with your charger that are due to manufacturing defects or workmanship, Our dedicated team will assist you in resolving the matter promptly.
Bestseller No. 3
Tesla Wall Connector - Electric Vehicle (EV) Charger - Level 2 - up to 48A with 24' Cable
  • COMPATIBILITY: Wall Connector is compatible with all Tesla models: Model S, Model 3, Model X and Model Y.
  • CHARGING SPEED: Up to 44 miles of range per hour of charge, with up to 11.5 kW / 48 amp output, depending on Tesla model and breaker size.
  • CONVENIENCE: Indoor or outdoor installation (by your own electrician or one of the 1,400+ Tesla Certified Electricians) with variable amperage that allows max output to be customized to an existing power supply and supports any output up to 48A. Possible max output configurations include: 48A, 40A, 32A, 24A, 16A, 12A.
  • CONNECTIVITY: Connecting the Wall Connector to a local Wi-Fi network enables over-the-air firmware updates for continual product improvements and remote access control.
  • POWER-SHARE: Power-share is ideal for locations that need to charge more than one Tesla at the same time. This functionality allows up to six Wall Connectors to be linked for efficient power management.
SaleBestseller No. 4
Winado Level 2 EV Charger, 32A 25FT Portable Car Charger w/Smart APP Control & Adjustable Current, Adapter Electric Vehicle Charging Station with NEMA 14-50 Plugs for Home
  • Faster Charging - Enjoy 6x faster charging with this charger with Level 2, 32Amp output power and NEMA 14-50 plug. 2-in-1 design, you can use mobile or wall-mounted.
  • Adjustable Current & Delayed Start - Its adjustable current range is 10/16/24/32Amp, allowing you to customize the charging speed according to your specific needs.
  • Smart APP control - EV Charge can monitor and specify the charging start time in real time. You can remotely control and monitor the charging status through the smart APP, view charging costs, history, full charge notification, track charging status, and adjust the current before charging.
  • Excellent protection - This product is IP66 waterproof, which is higher than most IP55 waterproof levels on the market. It has passed international certification and has lightning protection, leakage, grounding, low voltage, overvoltage, overcharge, overheating, overcurrent and other protection functions, making it You can use it with more peace of mind.
  • Universal Compatibility - EV Charge is compatible with most J1772 compliant electric vehicles and plug-in hybrid vehicles. Ideal for users with more than one electric vehicle or buildings with electric vehicle charging bases. When traveling or visiting relatives and friends, you no longer have to worry about charging.
SaleBestseller No. 5
Grizzl-E Level 2 240V / 40A Electric Vehicle (EV) Charger UL & Energy Star Certified Metal Case Indoor/Outdoor Electric Car Fast Wall Charging Station, NEMA 14-50 Plug, Classic Black
  • Grizzl-E Classic NEMA 14-50 Plug with 24 Feet Premium Cable is a simple, powerful, heavy-duty and portable Electric Vehicle Charging Station which is suitable for normal and cold weather. Compatible with all EVs and PHEVs sold in North America.
  • UL Full Tested and Certified. Eligible for Federal rebate program. IP67 (Water resistant), Fire resistant. Over Current, Over Voltage , Under Voltage, Missing Diode, Ground Fault, and Over Temperature Protections. Self-Monitoring and Recovery, Power Outage Recovery. Built in GFCI.
  • Fast charging and adjustable amperage: 40A, 32A, 24A, 16A. Maximum current output of 40 Amps for 50A circuit breaker, 32 Amps for 40A circuit breaker, 24 Amps for 30A circuit breaker, or 16 Amps for 20A circuit breaker. Charge Rate: 28-30 miles per hour at 40A, 22-25 miles per hour at 32A, 15-18 miles per hour at 24A and 10-12 miles per hour at 16A.
  • Easy to install and use. Save hundreds of dollars on installation : just install a simple 14-50R outlet and you are ready to plug in your Grizzl-E. Easily transportable. Simple to remove from the mounting bracket and transport between different locations. NEMA-4 water and air tight metal enclosure. More power and output configurations for your money than any other charging station.
SaleBestseller No. 6
EVIQO Level 2 EV Charger - 48 Amp EV Charger Level 2, 240V Electric Vehicle Charging Stations, EV Level 2 Charger NEMA 14-50/Hardwire EVSE Level 2 Charger, 25' Cord Electric Car Charger Energy Star/UL
  • 9X FASTER: EVIQO is electric vehicle charger for home providing 38 m/h (40 amp ev charger by default) and 46 m/h if hardwired and set as a 48A EV charger. Max output for EV charging station level 2 is set with a dip switch. Adjustable current: 1A increment in EVIQO app. Stay EVIPOWER-ful with live 24/7 post-sale customer support.
  • SAFE, USA CERTIFIED: EVIQO electric car charger level 2 is UL compliant, Energy Star, ETL and FCC certified EV charging station with 2+1 year Extended Manufacturer Warranty. EVIQO level 2 home ev charger is weatherproof. This EV car charger level 2 is suitable for use as an indoor/ outdoor EV charger. EVIQO EV wall charger level 2 meets NEMA 4 and IP66 protection standards.
  • SMART APP: EVIQO surveyed 1,800 EV owners to create EV home charger level 2 app. Set up to 3 schedules for cost savings during off-peak rates. Get smart tips and reminders, track power/costs live and monitor the charging history. Enjoy sleek intuitive interface of your electric car charger 240v. EVIQO level 2 car charger consistently enhances its firmware with remote OTA updates.
  • COMPATIBLE WITH ALL EVs: EVIPOWER electric car home charging stations are equipped with heavy duty rubberized SAE J1772 connector compatible with all EVs / PHEVs in NA: all Tesla models, Chevrolet Bolt, VW ID 4, Nissan Leaf, Polestar 2, Ford Mustang Mach-E, IONIQ 5/6, BMW i3, i4, iX, Mercedes EQS, Audi, Rav4, VW ID 4, Jeep Wrangler 4xe level 2 charger (Tesla requires an adapter).
  • FIRST-IN-CLASS: EVIQO electric vehicle charging stations offer the MARKET'S LONGEST 37" input cable with a NEMA 14-50 plug along with a 25' EXTRA LONG output cable.
Bestseller No. 7
DAOLAR Wall Mount Connector Holster Dock - Nozzle Holster Dock Charging Cable Organizer for All SAE J1772 EVSE Electric Vehicle EV Charger Holder
  • 【Makes For A Nice Setup】DAOLAR dock and hook combination is truly the perfect accessory for your EV charger. It is a simple addition that will have a huge impact to the outlook of your garage. The design concept is to keep your space organized and protect your charger from damage
  • 【Heavy Duty and Durable】Heavy duty metal makes this charger holder extremely durable that can hold your EV Charger steady,and super easy to clean
  • 【Perfect Fit All J1772 Plug】Highly recommend to anyone who want to mount standard J1772 type connector, indoors or outdoors
  • 【Simple to Use】Simple insert and click the EV charging nozzle. The long charging cables can be easily coiled up and hung on the deep J hook
  • 【No Cable Mess】Our cable organizer keeps your space clean by providing your wall ev charger with a safety storage holder - preventing kinking or tangling - so it stays ready for the next charge
Bestseller No. 8
EVDANCE Level 2 EV Charger (40Amp, 240V, NEMA 14-50P), Portable Electric Vehicle Charging Stations EV Charger with 28 ft Charging Cable EV Chargers for Home Level 2
  • NOTE: It is necessary to use a J1772 to Tesla adapter in order to use Tesla vehicles.
  • 8X FAST CHARGING: This fast charging car charger operates at Level 2 capacity, delivering an impressive 40Amp/240V, providing a formidable 9.6 KW charging capability. Experience unparalleled speed as it charges your electric vehicle up to 8 times quicker (at an impressive rate of 29~36 miles per hour) compared to a standard Level 1 charger.
  • CHARGE ANY VEHICLE: This electric vehicle charger is universally compatible with all non-Tesla EVs and hybrids that utilize the standard J1772 plug connector, encompassing models.
  • SMART CHARGING: Adjust the current limit (10A/16A/20A/24A/32A/40A) to match your home's circuit and with delay start, you can stagger the peak period of use to save electricity and reduce load
  • Real-Time Charge Monitoring: Stay in the know with LED indicators and a vivid 1.77 nch TFT screen that provides instant updates on voltage, current, and power load, keeping you informed about the charging progress.
Bestseller No. 9
Tesla Universal Wall Connector - Electric Vehicle (EV) Charger with Dual Plug Type - Compatible for All North American EVs - Level 2 - up to 48A with 24' Cable
  • UNIVERSAL COMPATIBILITY: Seamlessly transitions between NACS and J1772 connectors, accommodating all major North American EVs including Tesla Vehicles
  • CHARGING SPEED: Up to 44 miles of range per hour of charge, with up to 11.5 kW / 48 amp output, depending on Tesla model and breaker size.
  • CONVENIENCE: Indoor or outdoor installation (by your own electrician or one of the 1,400+ Tesla Certified Electricians) with variable amperage that allows max output to be customized to an existing power supply and supports any output up to 48A. Possible max output configurations include: 48A, 40A, 32A, 24A, 16A, 12A.
  • CONNECTIVITY: Connecting the Wall Connector to a local Wi-Fi network enables over-the-air firmware updates for continual product improvements and remote access control via the app.
  • POWER-SHARE: Power-share is ideal for locations that need to charge more than one Tesla at the same time. This functionality allows up to six Wall Connectors to be linked for efficient power management.
SaleBestseller No. 10
AIMILER Level 2 Electric Vehicle (EV) Charger(32Amp, 110V-240V, NEMA 14-50 Plug), 25ft Cable ETL Listed Portable Indoor/Outdoor EVSE SAE J1772 EV Car Charging Station w/Delay Timer, WiFi Enabled
  • ❤ [Working Voltage]: 👍Fits for: 110V-260V, suggest 220V or 240V(32A). 👍If your input voltage is under 220V, the safe current(Amperage) may be adjusted below 32A automatically. 👍If your input voltage is 110V, the default setting current is 15A, some cars may adjust to 12A because part of the electric cars such as Tesla will be adapted to the appropriate current according to the voltage change.❤ [Operating Regulations]: 👍Plug Socket: Only works with Nema 14-50 plug-in socket; 👍Doesn't charge or shows "No Plug error": Pull out the charging gun, long press "Ⓐ Button" until the screen shows "Plug-and-Play", then re-start and it will work well.
  • ❤ [6X Faster with ETL, FCC and CE Listed, Meets the Safety Criteria Defined by: SAE J1772, UL2231-1/-2, UL 991, UL 2231, UL 2251, UL1998 and UL 2594 & Compatible with all EVs and PHEVs Sold in North America]: Say goodbye to slow level 1 ev charger and enjoy 6X faster charging. Designed with J1772 TYPE 1 standard connector, compatible with Tesla (Adaptor Needed), Ford, GM, Nissan, Audi, Kia, Honda, BMW, Kia, Hyundai, Gmc, Chevy, etc.❤ [Up to 7.68kWh High Speed Charging & Adjustable Amperage from 16A to 32A]: Maximum current output of 32 Amps for 40A circuit breaker, 24 Amps for 30A circuit breaker, or 16 Amps for 20A circuit breaker.
  • ❤ [2 Operating Modes: LED Screen Touch Control or APP Control, Real-time Monitor and Appoint The Charging Start Time, Save your Money]: The LED Screen Clearly show the Amperage, charging speed, input voltage, delay time, charge safely. For the touch buttons: 1. Pull out the charging gun, otherwise the touch buttons will no respond; 2. Long press "Ⓐ" to switch "Plug-and-Play" or "APP Start" charging modes; 3. Short press "Ⓐ" to adjust the amperage from 16A to 32A by needs.❤ The APP allows your vehicles to be charged during off-peak period by setting the delay start time, save the electricity bills. Check the charging cost, history, fully-charged notification, track the charging status.
  • ❤ [Wi-Fi Reset Function, Add New Device Quickly]: If you can't find your device or you have replaced a new phone, you can use the Wi-Fi Reset Function, then you will find the device and connect quickly! (Pull out the charging gun, simultaneously long press the Ⓐ button and time adjustment button on the product screen until it shows "WIFI Reset", then re-start your device.) ❤ [Nema Type 4 Protection Degree & 25ft Long Bold Cable]: Approved by NEMA Type 4, the Aimiler ev charger can be used indoor or outdoor. Equipped with 25 feet military grade charging cable, the drop-resistant plug endures over 10,000 charges, up to 2 tons of pressure, and offers a 20-year lifespan.
  • ❤ [Question & Answer 1: Why can't find the device on app? or Can't find the device after changing phones]: Solutions: 1. Confirm your phone to connect with the 2.4Ghz wifi, not connect the wifi whose name has 5G suffix; 2. Turn on the wifi and bluetooth of the phone; 3. Wifi reset: Pull out the charging gun, simultaneously long press the Ⓐ button and time button on the product screen until it shows "WIFI Reset". 4. Re-start and add your device.

Last update on 2024-04-22 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...