“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161584
Manufacturer Communication Number: M511616
Summary
CAVITY PROTECTION WAX LEAKING OUT OF HOOD. Cavity protection applied to underside of hood is leaking out onto wheel arch trim and grille.
11 Affected Products
Vehicles
MAKE | MODEL | YEAR |
MINI | COOPER | 2014-2019 |
MINI | COOPER S | 2014-2017, 2019 |
SITUATION
Cavity protection applied to underside of hood is leaking out onto wheel arch trim and grille.
CAUSE
Improper application of Cavity Protection Wax during vehicle production.
CORRECTION
Remove the current cavity protection, and reapply it more accurately.
PROCEDURE
For conditions that are similar to the situation described, refer to the attachment for detailed repair information.
PARTS INFORMATION
Part Number | Description | Quantity |
---|---|---|
83 12 0 390 086 | Cavity Protection Wax Remover (125 ml) | Sublet as necessary |
83 42 0 428 190 | Cavity Protection Wax (400 ml) | Sublet as necessary |
SEOCONTENT-START
SI M51 16 16
Body
May 2019
Technical Service
CAVITY PROTECTION WAX LEAKING OUT OF HOOD
New information provided by this revision is preceded by this symbol .
This Service Information bulletin replaces SI M51 16 16 dated September 2017.
What’s New:
• Production date removed
• F60 added
MODEL
F56 (MINI Cooper,
Cooper S Hardtop 2
Door)
F56 (MINI Cooper,
Cooper S Hardtop 2
Door)
F60 (MINI Countryman)
SITUATION
Cavity protection applied to underside of hood is leaking out onto wheel arch trim and grille.
CAUSE
Improper application of Cavity Protection Wax during vehicle production.
CORRECTION
Remove the current cavity protection, and reapply it more accurately.
PROCEDURE
For conditions that are similar to the situation described, refer to the attachment for detailed repair
information.
PARTS INFORMATION
Part Number Description Quantity
83 12 0 390 086 Cavity Protection Wax Remover (125 ml) Sublet as necessary
TIS Service Bulletin Page 1 of 3
https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/507… 6/3/2019
83 42 0 428 190 Cavity Protection Wax (400 ml) Sublet as necessary
WARRANTY INFORMATION
Covered under the terms of the MINI New Passenger Car Limited Warranty.
Defect Code: 51 97 02 49 00
Labor
Operation:
Labor
Allowance: Description:
41 61 000 Refer to AIR Removing and Installing Bonnet (Main Work)
Or:
41 61 600 Refer to AIR Removing and Installing Bonnet (Plus Work)
And:
51 99 000 8 FRU Work time for removing excess cavity wax and reapplying
correct amount of cavity protection wax.
Labor operation code 41 61 000 is a Main labor operation. If you are using a Main labor code for another
repair, use the Plus code labor operation 41 61 600 instead.
Refer to AIR for the corresponding flat rate unit (FRU) allowances.
Work time labor operation code 51 99 000 is not considered a Main labor operation. Also, since the work time
FRU allowance to be claimed is specified, a separate punch time is not required. However, it still requires an
explanation on the repair order and in the claim comments section.
And, as needed:
Sublet – Bulk Materials
Sublet Code 4
See the sublet
reimbursement
calculations below
Reimbursement for the repair-related bulk
materials (Do not use the MINI part numbers
for claim submission)
Sublet reimbursement calculation for claiming the applicable repair-related bulk materials (MINI part
numbers) is at the dealer net price amount for the quantities used plus your center’s handling.
Enter this material cost in sublet and itemize the amount on the repair order and in claim comment section.
Main Group (MG) 41 Flat Rate Labor Operations
A secondary “R FRU” value can appear for certain MG 41 labor operations. This identifies the portion of
inclusive mechanical work that is also already contained in the specific flat rate labor operation. For example,
in the labor operation 41 61 000 “Removing and installing engine compartment lid” for an F60:
• The main labor operation is 7 FRU
• “R” FRU is 4
Since this “R” notation identifies inclusive work, do not claim the stated R FRU amount (i.e., 4 FRU)
separately, in addition to the job item’s primary FRU allowance (i.e., 7 FRU). A resultant claim for the sum of
those values (11 FRU) would be rejected.
Wednesday, May 22nd, 2019
TIS Service Bulletin Page 2 of 3
https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/507… 6/3/2019
ATTACHMENTS
View PDF attachment Attachment A SIM51 16 16.
[ Copyright ©2019 BMW of North America, Inc. ]
TIS Service Bulletin Page 3 of 3
https://www.minitis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/507… 6/3/2019
Attachment A SIM 51 16 16 April 2017
1. Remove chrome trim from rear of
hood to prevent damage. Refer to
“51 13 085 Removing and
installing/replacing trim strip on
engine compartment lid (cowl
panel).
2. Raise hood and remove clips
holding under-hood insulation using
appropriate clip removal tool.
3. Remove clips for under-hood
insulation and remove insulation
completely.
Attachment A SIM 51 16 16 April 2017
4. Disconnect and remove washer
hose and both washer nozzles.
5. Install appropriate tool to support
hood and disconnect hood strut at
upper mount on both sides.
Follow Repair Instructions “41 61
000 Removing and installing engine
compartment lid” for all necessary
measure and precautions.
6. With hood safely supported, loosen
nut (1) on both sides, but do not
completely remove. Remove nut
(2) completely on both sides.
Attachment A SIM 51 16 16 April 2017
7. Feed washer hose out of hood
before hood removal.
8. Remove hood completely from the
vehicle and place into body panel
hanger, or:
9. If body panel hanger is not
available, the hood can be rested in
the position shown. Use foam
blocks as shown to prevent damage
to the corners and surface of the
hood.
Attachment A SIM 51 16 16 April 2017
10. Using suitable plastic tool, remove
all rubber grommets and body plugs
on the underside of the hood (12
total).
11. Once the plugs are removed, apply
the cavity wax remover liberally to
all of the cavities starting from the
top down. Use ½ of the bottle, the
other ½ is to be used for the second
application.
Wait a minimum of 15 minutes to
allow the solvent to dissolve the
excess cavity wax.
12. After 15 minutes has elapsed, rinse
out all cavities and underside of the
hood with water starting from the
top down. If possible, use
lukewarm (not hot) water for a
more effective removal of the wax.
Attachment A SIM 51 16 16 April 2017
13. Using compressed air, dry the hood
from the top down.
14. Using the remaining ½ of the bottle
of cavity wax remover, apply again
from the top down. Repeat steps
11 through 13.
15. Once the hood has been thoroughly
rinsed and dried, re-apply cavity
wax to cavities in the hood. Start
from the top and work down
spraying a small amount into all
holes and cavities.
Note: Use only 125 mL of the cavity
wax, avoid over-applying.
Note: Be aware that the BMW
Cavity wax spray is 400mL, so one
spray can will cover more than
three vehicles.
Attachment A SIM 51 16 16 April 2017
16. Re-install the 12 body plugs.
17. Re-install hood, all (4) tighten hood
attachment (M8) nuts to 19 Nm.
Attach hood struts. Align hood if
needed according to repair
instructions.
18. Re-install washer nozzles and
hoses.
Attachment A SIM 51 16 16 April 2017
19. Re-install chrome trim on rear of
hood.
20. Re-install under hood insulation.
21. Once complete, if possible, leave
hood in the raised position for at
least 12 hours for the best results.
SEOCONTENT-END
SI M51 16 16
May 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161584
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161584-9999.pdf
- 3-in-1 Ceramic formula that REPAIRS fine swirls and scratches, SEALS in protection giving a wet shine finish without the wax and actively REPELS water with the durable Ceramic Technology.
- The innovative Ceramic Technology and durability of a Sealant extends duration of water-beading and protection against water pooling and water damage up to one year*.
- Now with Ceramic Technology for more water beading and protection, Nu Finish The Once A Year Polish & Sealant still contains absolutely no wax.
- Our formula brings shine back to your paint, polishes chrome, and helps to remove fine swirls and scratches in just one amazing formula.
- Polishing power helps remove minor scratches, rejuvenates paint shine and polishes chrome.
- EXCEPTIONAL RESULTS: Advanced technology formula provides a deep gloss and rich, swirl-free results
- NO MORE SWIRLS: Permanently removes swirls and light defects from all paint
- STUNNING SHINE: Produces deep reflections and high gloss
- EASY TO USE: Smooth buffing feel, easy wipe-off, and fast clean-up
- MULTIPLE WAYS TO APPLY: Formulated for use by Hand, DA Polisher, or Rotary Buffer
- REMOVE PAINT DEFECTS: The ultimate product for removing oxidation, scratches, water spots, and blemishes without scratching
- BEST CAR SCRATCH REMOVER: Cuts as fast as harsh abrasives restoring surface clarity without scratching or swirling
- SAVES TIME: The clear coat safe formula dramatically reduces the time and effort to restore abused or neglected paint finishes
- STUNNING FINISH: Exclusive micro-abrasive technology leaves a "like new" finish and adds gloss in one easy step
- SAFE FOR CLEAR COAT: Safe and effective on clear coat and single stage paints, and can be applied by hand or dual action polisher like Meguiar's MT300 Dual Action Polisher
- Nu Finish Liquid Car Polish keeps your car exterior looking new with only one application per year.Fit Type: Universal
- Delivers impressive shine and protection without rubbing or buffing
- As the only polish available with no wax, the Nu Finish formula is specifically made to protect your car’s paint and clear-coat finish
- Perfect for use on cars, fiberglass boats, RVs, and even chrome surfaces
- Apply polish with a damp cloth, let dry to a haze, and wipe off
- EASY-TO-USE ONE STEP POLISH! - P4 Precision Paint Perfection Polish is the easy-to-use one step polish that removes fine swirls, scratches, towel marks, and corrects 2000 grit and finer sanding marks while leaving virtually no dusting or residue behind! .Fit Type: Universal Fit
- SAFE FOR ALL PAINTS! - Ultra-fine abrasives used in P4 are specially developed for all paints including ceramic coated vehicles to remove microscopic amounts of clear coat quickly and leave paint incredibly glossy, shiny, and haze-free!
- WORKS GREAT ON CERAMIC COATINGS! - P4 works great on ceramic coated cars to remove minor imperfections while maintaining the integrity of your coating to produce deep, rich reflections without damaging your protection!
- SHOW CAR SHINE & GLOSS! - Chemical Guys P4 gently removes fine swirls and scratches to deliver a truly perfect finish with a deep gloss and mirror-like finish as the final step in your polish! For even more comprehensive results, first apply C4 Clear Cut Correction Compound!
- PERFECT PREP FOR CERAMIC, SEALANT, AND WAX! - Prepping your car with P4 Polish ensures that your wax, sealant, or ceramic coating makes contact with a totally bare surface, maximizing coating adhesion and durability! Get a deep gloss and shine in no time!
- Heavy duty paste that cleans dull, oxidized finishes
- Quickly and easily penetrates through the oxidized surface to remove scratches, blemishes and stubborn stains
- Restores faded finishes
- Recommended for rubbing down between coats of newly sprayed lacquer and acrylic car finishes
- Easy to use formula
- CORRECT & PROTECT … 3D Speed is a premium all in one clear coat car polish & wax all in one bottle!
- BRING YOUR PAINT BACK TO LIFE … 3D Speed is an excellent scratch and swirl remover polish and sealant that deliver minor paint correction for small or large surface areas! Please note: Our products will not remove deep scratches or correct areas where paint may be missing.
- DEPTH AND GLOSS IN ONE … Restore your paint's color, depth and gloss while also adding a long lasting wax layer protection to the surface!
- EASY APPLICATION … You can easily apply 3D Speed by hand for smaller surface areas or with a polisher or buffer for larger areas with more imperfections.
- PROUDLY MADE IN THE USA ... We've been researching and creating exterior and interior car care products for over 25 years now. A quarter of a century of giving our customers uncompromising quality. Go ahead, experience a car polish and wax that's tried and trusted. Date on bottles reflect manufactured dates, not expiry dates.
- Advanced Formula 3-in-1. Our fortify quick coat is your all-in-one ceramic coating hydrophobic spray. Shine Armor Fortify Quick Coat ceramic car wax provides a waterless wash, coat, and shine, all-in-one convenient product.
- No Streaking, Smearing Or Scratching. Shine Armor Fortify Quick Coat premium formula ceramic car coating is a gentle and effective car polish for any vehicle! Get a clean, shiny finish without hurting your car's paint.
- Cuts Dirt, Grime & Grease. Our Quick Coat ceramic wax car sealant eliminates dirt, grime & grease instantly! Our signature 3-in-1 formula gives you a waterless car wash, coat and shine for a clean, showcase look.
- Safe For All Surfaces. Use this car wax spray-on automobiles, boats, motorbikes, RVs, four-wheelers and more! This spray wax is the perfect blend of surfactants and SiO2 ceramic-coating science.
- Superior Products. This means superior shine for your cars! Our ceramic quick coat also works as a sealer to give your vehicle a clear shield of protection while also providing a beautiful gloss. Our ceramic coat is the best hydrophobic car spray available!
- DEFECT REMOVAL: Removes fine surface defects including light oxidation, stains, scratches, swirls and fresh water spots
- PAINT CLEANER: Mildly abrasive cleaner cuts quickly, then reduces to a buffing rouge, leaving a professional finish ready for polishing and protecting
- NO SCOURING: Buffered abrasive action lubricates the finish to prevent scouring or scratching
- CLEAR COAT SAFE: Safe and effective on all glossy paint finishes including clear coats, and especially ideal for older lacquer and enamel paints
- VERSATILE USE: Body shop safe formula can be used by hand, DA polisher or rotary buffer
- Our best finishing and highest gloss pro polish ever!
- Creates deep, glossy finish without swirls or holograms
- Pro cleaner polish designed to remove DA haze or Rotary swirls and leave a flawless finish
- Easy wipe-off, virtually zero dusting or sling with Rotary or DA Polisher
- Engineered for flawless finish after Meguiar's M110 Ultra Pro Speed Compound even on dark & sensitive paints
Last update on 2024-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.