“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V557
Manufacturer BMW of North America, LLC
Components FUEL SYSTEM, GASOLINE
Potential Number of Units Affected 9,953
Missing Fuel Pump Crash Protection Plate
Without the crash protection plate, in the event of a crash, the fuel pump can become damaged, causing a fuel leak and increasing the risk of a fire.
Summary
BMW of North America, LLC (BMW) is recalling certain 2017-2019 MINI Cooper Countryman vehicles. These vehicles may be missing a crash protection plate near the high pressure fuel pump, which may result in a fuel leak in the event of a crash.
Remedy
MINI will notify owners, and dealers will install a crash protection plate, free of charge. The recall is expected to begin October 15, 2018. Owners may contact MINI customer service at 1-866-825-1525.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your MINI has a Recall
SI M13 02 18 Fuel Systems |
September 2018 Technical Service |
RECALL CAMPAIGN 18V-557: INSTALL PROTECTION PLATE ON HIGH PRESSURE FUEL PUMP
New information provided by this revision is preceded by this symbol .
Please perform the procedure outlined in this Service Information on all affected vehicles before customer delivery. In the event the customer has already taken delivery of the vehicle, please perform the procedure the next time the vehicle is in the shop.
This Service Information bulletin replaces SI M13 02 18 dated August 2018
What’s New:
- All information has been updated
MODEL
Engine | Model |
B36M | F60 MINI Cooper Countryman, MINI Cooper Countryman ALL4 |
SITUATION
A crash protection plate was not installed on the high pressure fuel pump.
AFFECTED VEHICLES
This Recall Campaign involves MINI Cooper Countryman (including Countryman All4) vehicles with B36M engines produced December 30, 2016 to July 19, 2018.
Vehicles which require this Recall Campaign to be completed will show it as “Open” when checked either in AIR, the “Service Menu” of DCSnet (Dealer Communication System) or with the Key Reader.
CORRECTION
Install the protection plate on the high pressure fuel pump
PROCEDURE
Follow the procedure outlined in attachment M13 02 18 Fitting Protective Plate to the High Pressure Pump.pdf
PARTS INFORMATION
Description | Quantity | Part Number |
---|---|---|
Protective plate | 1 | 13 51 8 653 186 |
Torx socket with washer | 2 | 13 51 7 632 572 |
WARRANTY INFORMATION
Reimbursement for this Recall repair campaign will be via normal claim entry utilizing the following information:
Defect Code: | 0013900200 |
The vehicle is already in the workshop for another repair that includes Main work
Labor Operation: | Labor Allowance: | Description: |
---|---|---|
00 66 901 | 7 FRU | Retrofitting of protective plate of the high pressure pump (Plus work) |
Or:
The vehicle arrives at your dealer for this Recall repair (No other Main work will be performed/claimed during this workshop visit)
Labor Operation: | Labor Allowance: | Description: |
---|---|---|
00 66 226 | 8 FRU | Retrofitting of protective plate of the high pressure pump (Main work) |
TREAD Act – Previous Customer-Pay Repairs
Reimbursement requests for prior customer-pay repairs that specifically address the issue described in this Recall bulletin are not very likely.
Posted: Wednesday, September 12, 2018
ATTACHMENTS
View PDF attachment 2018-MY2017-19_F60_CrashProtectionPlate-QA-(17Aug2018).
View PDF attachment M130218 Recall Notice.
View PDF attachment M13 02 18 Fitting Protective Plate to the High Pressure Pump.
Installing the Protection Plate to the High Pressure Fuel Pump (HPP)
|
|
|
|
|
|
|
*Installation torque 3Nm |
|
*Installation torque 3Nm |
|
|
|
|
|
Reinstall remaining components in reverse order.
SAFETY RECALL NOTICE
To: All Center Operators, Sales Managers, Service Manager, Parts Manager and Warranty Processor
RE: Delivery Stop & Recall 18V-XXX: Crash Protection Plate M13 02 18
BMW Group is conducting a Voluntary Safety Recall (effective August 20, 2018) on Model Year 2017-2019 MINI Cooper Countryman (including Countryman All4) vehicles with B36M engines. The production range is December 30, 2016 (Start-of-Production) through August 13, 2018. The issue involves the crash protection plate for the high pressure fuel pump. The plate was not installed during production.
Owners will be notified by First Class mail about the Recall and will be instructed to bring their vehicles in for a free repair when parts are available.
Please be reminded that it is a violation of federal law (The Safety Act) for you to sell, lease or deliver any new motor vehicle covered by this notification until the recall repair has been performed. This means that centers may not legally deliver new motor vehicles to consumers until they are fixed or use/sell replacement equipment/parts subject to this recall. Note also that substantial civil penalties apply to violations of the Safety Act.
Also, you should not sell, lease or deliver any Certified Pre-Owned or used vehicles subject to a safety recall until the repair is completed.
Please follow any special instructions that we provide to you for the return or disposition of recall parts.
We appreciate all your assistance with this Recall.
Crash Protection Plate
Safety Recall 18V-xxx
Model Year 2017-2019
MINI Cooper Countryman
Last Updated 08/17/2018
Q1. Which MINI models in the US are potentially affected by this Safety Recall?
Approximately 9,537 Model Year 2017-2019 MINI Cooper Countryman (including Countryman All4) vehicles, produced from December 2016 (Start-of-Production) through August 2018, are potentially affected.
MINI Cooper S Countryman models are not affected.
Q2. What is the specific issue?
The crash protection plate for the high pressure fuel pump was not installed during production. In a front crash of sufficient severity, the fuel pump could become damaged, which could increase the risk of a fuel leak, and in an extreme case, a fire.
Q3. What can happen as a result of this issue?
In a crash of sufficient severity, the fuel pump could become damaged, which could increase the risk of a fuel leak, and in an extreme case, a fire.
Q4. How did MINI become aware of this issue?
MINI became aware of this issue through its quality control procedures.
Q5. Why are other MINI vehicles not included in this Safety Recall?
Other vehicles were equipped with a crash protection plate during production.
Q6. Can I determine if this issue exists in my vehicle?
No.
Q7. Can I continue to drive my vehicle?
Yes. When you receive a letter asking you to have this recall performed by an authorized MINI dealer, please do so as soon as possible. If you are not the only driver of this vehicle, please advise all other drivers of this important information.
Q8. How will my vehicle be repaired?
The crash protection plate will be installed.
Q9. Is MINI aware of any accidents, injuries, or fires involving these MINI vehicles associated with this Safety Recall?
No.
Q10. How will I be informed of this Safety Recall?
You will receive a letter via First Class mail in October advising you of this recall and to immediately schedule an appointment with an authorized MINI dealer to have this recall performed.
- You can locate your nearest authorized MINI dealer at miniusa.com/dealer.
- To ensure MINI has your most recent contact and vehicle information, please register your vehicle at miniusa.com/ol. Registration is free, and will give you access to factory initiated campaigns and other information specific to your MINI.
Q11. Do I have to wait for my letter in order to have my vehicle serviced?
Yes. We are in the process of implementing this program to ensure that the necessary parts, tools and procedures are available, prior to contacting you to schedule your vehicle to have this safety recall performed. For the latest updates to this recall, please visit www.miniusa.com/recall.
18V-557 Crash Protection Plate Parts Supply
September 13, 2018
https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V557-9722.pdf
SI M13 02 18
September 2018
https://static.nhtsa.gov/odi/rcl/2018/RCRIT-18V557-6839.pdf
MINI Delivery Stop & Recall: Crash Protection Plate
August 20, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCMN-18V557-9624.pdf
Recall Acknowledgement
September 17, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V557-9233.pdf
- Cleans and Lubricates Fuel System: The product contains a blend of detergents and additives that help to clean and lubricate the fuel system, including the fuel injectors, carburetor, and combustion chamber.
- Improves Fuel Economy: The product can help to improve fuel economy by removing deposits and contaminants from the fuel system and improving the efficiency of fuel combustion.
- Reduces Emissions: By improving fuel combustion, the product can also help to reduce exhaust emissions, including harmful pollutants such as carbon monoxide and nitrogen oxides.
- Increases Power and Acceleration: The product can also help to increase power and acceleration by improving the flow of fuel through the system and reducing the buildup of deposits that can impede engine performance.
- Neutralizes Low Sulfur Fuel Problems: Lucas Oil 10013 Fuel Treatment contains a blend of detergents and additives that help to neutralize sulfur and other harmful contaminants that may be present in the fuel system. The detergents work to clean the fuel injectors and carburetor, which can become clogged with sulfur deposits over time.
- Increases power and miles per gallon by burning excess exhaust emissions
- Increases the life of pumps and injectors
- Cleans and lubricates the fuel system
- Neutralizes low sulfur fuel problems
- QUALITY ASSURED
- Reduces: rough idle, engine surge, hesitation, and spark plus fouling
- 20 oz. bottle.
- Improves: cold start performance, and fuel stability for up to one year
- Helps your entire fuel system run smoother and last longer
- Cleans fuel injectors and carburetor passageways
- Cleans intake valves and chamber deposits
- Lubricates upper cylinders
- Safe for all gasoline and diesel engines
- ALL-ROUND ENGINE SOLUTION - Works in all engines and all fuels, making it the ideal fuel treatment and stabilizer for any vehicle or gas powered tool
- ETHANOL PROBLEM SOLVER - Prevents and cures most ethanol-related issues, including poor performance and decreased fuel economy
- OLD FUEL REVITALIZER - Stabilizes fuel up to 2 years and can help rejuvenate old, sub-spec fuel, even after months of inactivity
- FUEL ECONOMY MAXIMIZER - Removes and prevents gum, carbon deposits, and varnish build-up, resulting in improved fuel economy
- WATER BUILD-UP PREVENTION - Disperses water throughout fuel as submicron-sized droplets that are safely eliminated while the engine operates
- The more an engine is driven, the more carbon deposits can build up on fuel injectors, intake valves and ports
- Gumout High Mileage Fuel Injector Cleaner is specially formulated to remove carbon deposits from engines with more than 75,000 miles
- Cleans fuel injectors, intake valves and ports to restore performance, fuel economy and prevents future carbon build-up, which reduces emissions
- Oxygen sensor safe and safe for use in turbocharged and supercharged vehicles
- Recommended use every 3,000 miles and will not void OEM/manufacturer’s warranty
- Formulated to help save gas and lower emissions by deep cleaning the entire fuel system
- Formulated to help restore peak performance and reduce friction by lubricating engine parts
- Formulated to help prevent ethanol deposits and inhibit corrosion
- Works with modern gasoline engines such as turbo, direct inject and hybrid vehicles
- Compatible with cap-less gas systems
- Contains 100% High-Energy Solvent Technology
- Helps Keep Injectors Or Carb(S) And Intake Ports And Valves Clean
- Quickly Disperses Moisture And Dissolves Gum, Varnish, And Other Fuel Residues
- Disperses Moisture In Conventional Gasoline
- Quickly disperses moisture and dissolves gum, varnish, and other fuel residues
- RESTORES PERFORMANCE: Fuel injector cleaner cleans entire fuel system to help restore lost engine power
- INCREASED RESPONSIVENESS: Helps restore lost acceleration and throttle body response
- REDUCES CARBON DEPOSITS: Injector cleaner helps remove carbon buildup for increased power and acceleration
- SAFE ON ALL ENGINES: Specially formulated for direct injected or traditional fuel injected engines
- TREATS A FULL TANK: Formulated to treat up to 21 gallons of gasoline
Last update on 2024-04-04 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.